Antarmuka CAN HC010

HOMAG

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 35 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Gedpfx Ahjyqybuj Deip Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spray device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application via rubber belt Panel guides with NC positioning Glue tank for EVA hot-melt adhesive Premelting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on protective devices CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 5321

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, lebar kerja: 1.935 mm, jumlah spindel: 40, tinggi pelat: 350 mm, panjang kerja: 6.200 mm, jumlah sumbu: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Godpfeyqx U Hjx Ah Dsip Total connected load: 31 kW EQUIPMENT Vacuum cups for securing workpieces Safety mats at the front Vacuum pump Waste chip conveyor Fixed grooving unit for creating grooves in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 8105

Kondisi: sangat baik (bekas), single_side_edgebander Gedsyt Izbopfx Ah Deip

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction beam traverses: 8 Number of tool changer positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 Gjdpfsyttf Sox Ah Deip EQUIPMENT CE mark Front safety cover The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6906

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of traverse beams with suction: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of places: 18 Tool magazine 2 Number of places: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Gisdpfx Aoyttcwoh Dep The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, safety, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Gisdpfx Ahjytr Hbo Dop Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture components, allowing workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge bander capable of processing various edging materials up to 20 mm thick. If you are looking for high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edge banding machine, which we have for sale. Contact us for more details. • Line workpiece capacity: • Length: 250-3000 mm • Width: 120-1200 mm • Thickness: 8-60 mm • Edge banding machine (KAL 330) – Base and transport • Continuous machine frame; workpiece support with extendable roller rail ~800 mm • 80 mm wide transport chain with rubber coating; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18-25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depends on workpiece length) • Workpiece protrusion/overhang 30 mm • Workpiece thickness 12-60 mm • Edging material from strip: 0.4-20 mm (max. cross-section 900 mm²) • Edging material from coil: 0.3-3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter 830 mm • Pneumatic connection 7-8 bar • Infeed system and control (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic feeding (longitudinal and transverse); suitable for dimensionally accurate, square parts • Stepless adjustment of the infeed guide (axis), adjustable speed at entry terminal • Automatic aggregate lateral adjustment (workpiece overhang 30-80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edging preparation and gluing • Pre-milling unit: 2 motors, 4 kW each, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Premelting unit with granulate reservoir • Quick-change system for QA/QE application unit; QA front glue reservoir for color changes • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE Giodpfeytf Irjx Ah Djp • Automatic pressure zone adjustment • Trimming and milling • HL84 milling unit with stationary milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side milling fence adjustment when changing edge thickness • Rough trimming unit: 2 motors on top of each other, 1.5 kW each, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position adjustment: rough trimming with ~0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Servo contour trimming unit FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces 500 mm • Workpiece thickness 12-60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guidance with additional clamping for min. 120 mm workpiece length (one-sided) • Post-processing and cleaning • Multi-cleaning unit MN21 automatic:

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 39.359 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-201-04-0605, Deskripsi Peralatan Utama: Meja penjepit dengan konstruksi aluminium matriks Sistem vakum disiapkan untuk teknologi nesting 1000 m³/jam Panel kontrol Power Control dengan PC85 Spindle utama 15 kW dengan sensor getaran Poros C dengan antarmuka agregat Antarmuka untuk agregat FLEX-5 Penukar alat tipe piring dengan 10 posisi Unit pengeboran: 13 spindle – 9 vertikal dan 2+2 spindle horizontal Paket perangkat lunak untuk komputer kantor Gijdoyucyzjpfx Ah Djp Perangkat lunak WoodWOP Tools Kecepatan pemposisian maksimum: 80 m/menit pada arah X dan Y (kecepatan vektor: X/Y = 113 m/menit) / 30 m/menit pada arah Z

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Penggerak Utama Giodsx D Nvgepfx Ah Dop Jumlah sumbu: 3 Mesin HOMAG WEEKE OPTIMAT BHX 500 3-sumbu ini diproduksi pada tahun 2011. Mesin ini merupakan pusat pemrosesan CNC yang kokoh dengan area kerja 2500 mm x 1300 mm, daya spindle utama 6 KW, dan ketebalan panel maksimum 80 mm. Termasuk 84 spindle pengeboran dan spindle milling ganda, masing-masing dengan daya 6 KW pada 18000 rpm. Jika Anda mencari kemampuan CNC berkualitas tinggi, pertimbangkan mesin HOMAG WEEKE OPTIMAT BHX 500 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pemrosesan Kayu CNC

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), HOMAG PROFI BMG 511/60/12/R 4-axis ini diproduksi pada tahun 2015. Sebuah pusat pemrosesan CNC yang kokoh dengan changer alat 18 posisi, kepala bor dengan 30 spindle, dan alokasi area meja dinamis. Dilengkapi spindle milling utama dengan daya 12 kW dan rentang kecepatan hingga 24.000 rpm. Ideal untuk pekerjaan kayu kompleks dengan area kerja luas 6.000 x 1.550 mm. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Gjdpsx D Ra Hsfx Ah Dsip Pemrosesan Kayu CNC