Meja perakitan

Huellinghorst SYSTEMOplan

Kondisi: baru, Tahun pembuatan: 2024, nomor mesin/kendaraan: 302340, Section rolling machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers Fgedpfx Asd S Uf Ssm Sjc With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivel heads. Fgodod N Rb Djpfx Am Soc Drilling heads on each side at the front included. Very good condition. Available immediately.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% Fgjdpfjx Af Rdex Am Soc - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) Fjdpfxoqt Dmyo Am Ssgc - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Fgodpfsfpb Nmox Am Sjc Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Take advantage of Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅System Components: ►1 pc – Large, gas-heated powder curing oven ►1 pc – Automatic powder coating booth ►1 pc – Small, electrically heated powder curing oven ►2 pcs – Room-type mono-cyclone manual powder coating booths ►6 pcs – Automatic powder coating guns ►3 pcs – Manual powder coating guns ►1 pc – Automatic powder recovery unit ►6 pcs – Mono-cyclones ►1 pc – Automated control panel ►1 pc – Automated bar movement system with speed control ►2 pcs – Mobile platforms with speed control ►8 pcs – Parking stations ►300 m – Conveyor rail, 1000 kg capacity ►12 pcs – Suspension bars Our facility is located at Anhaltstr. 30, 14943 Luckenwalde. Please arrange an appointment to inspect the machinery on site. The system has been in operation for 10 years. Fgodpeiivq Ujfx Am Sjc As the direct manufacturer, we can make the modifications you require to the machines by mutual agreement. Doesn’t fit your existing installation space? We can adapt the layout accordingly. Please check the system PDF using the link below.

Kondisi: bekas, Lebar material 300 mm Berat coil 3 t Ketebalan material 2 - 4 mm Mesin pelurus, 7 rol, pabrikan Schleicher, tipe RM 6-95/160 Lebar strip: 300 mm Ketebalan strip: 2 - 4 mm Luas penampang pelurusan: 1200 mm² Tegangan: 220/380 V 50 Hz Daya: 3,1 kW Uncoiler dengan roller penekan, pabrikan Schleicher, tipe H-3 Beban maks.: 3 t Fgjdpfx Amecdrmme Sjc Lebar strip: 400 mm Tegangan: 220/380 V 50 Hz Daya: 3,92 kW tanpa kontrol

Kondisi: baru, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of holders: 7 Material: Tube, stainless steel Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m Fgjdpfsfv Atlox Am Ssc The length measuring system is available as a retrofit kit for existing roller conveyors in lengths from 2 to 6 meters. The guide rail is made from rectangular tubing, 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. A magnifier with 6x magnification assists with precise adjustment of the desired length. Note: This offer is for the stop system only – roller conveyor not included!

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) Fgsdpsfi Tg Hefx Am Ssc No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, berat keseluruhan: 41 kg, produsen pengendali: FANUC, jumlah sumbu: 6, en Fgedpfjx D Ezlex Am Sec