Pusat pemesinan dengan umpan tembus

Hundegger K2

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 450 mm, Perlengkapan: penghadang cahaya keselamatan, RINCIAN TEKNIS Lebar kerja: 450 mm (proses terbatas hingga 520 mm dimungkinkan) Dusdpfxsx I A A Ds Adgjl PERLENGKAPAN Tirai cahaya pengaman

Kondisi: bekas, dzinēju jauda - 55 un 55 kW ievades motors - 7,5 kW augstuma regulēšanas motors - 1,1 kW griešanas augstums - 200 mm griešanas platums - 350 mm zāģripas diametrs maks. - 300 mm vārpstas diametrs - 2 x 60 mm uzmavas diametrs - 2 x 70 mm sliedes platums - 350 mm kopējā jauda - 119 kW elektriskā padeves regulācija automātiska centrālā eļļošana elementa minimālais garums - 600 mm elektriska augstuma regulācija vārpstas augstuma regulācija seši augšējie spiediena veltņi pneimatiskās skavas piec antiizsviedes āķi lineāls uzmavas diametrs - 220 mm vārpstas apgriezieni - 4500 apgr./min iekārtas izmēri (garums / platums / augstums) - 275 / 235 / 210 cm svars - ~7000 kg Padevējs: griešanas maksimālais garums - 1850 mm griešanas minimālais garums - 800 mm materiāla maksimālais garums - 2500 mm materiāla minimālais garums - 600 mm materiāla maksimālais platums - 700 mm materiāla maksimālais augstums - 200 mm veltnīšu platums - 700 mm veltnīšu diametrs - 130 mm veltnīšu skaits - 26 3 gludie spiediena veltņi 4 zobainie vilkšanas veltņi padeves ātrums regulējams ar invertoru, 0-70 m/min zāģa vadotņu centrālā eļļošana Dujdpjwrw D Refx Adgel zāģmotoru jauda - 2 x 9,2 kW padeves motora jauda - 1,5 kW diskskaldīšanas motora jauda - 3 kW ķēdes motora jauda - 1,1 kW izmēri (garums / platums / augstums) - 7050 / 2100 / 1850 mm

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Zusätzliche Ausstattung: Zuführlänge: 8.270 mm / Maximale Holzlänge, Einlauf: 16.000 mm / Maximale Holzlänge, Auslauf: 12.000 mm / Zuführ-Querkette, 5-strängig, 2.200 mm / Ausziehbarer Holz-Auflagetisch / AQF-Kette mit Wellenverlängerung, 2.900 mm / Untertisch-Kappsäge schwenkbar / Gerader Schutzhauben-Klappe / Abfallentsorgung nach unten / Steuerung für Abfallentsorgungssystem / Universelle Fräsaggregat, 5-Achsen mit Profilfräser / Zinkenfräser / Keilzinkenfräser / Kombinierte Aufnahme für vertikal arbeitende Werkzeuge / Bohraggregat, 3,0 kW / Fingerfräser 1 / Kombinierte Aufnahme für horizontal arbeitende Werkzeuge / Schlitzaggregat, 480 mm / Bohraggregat 1, 2,2 kW / Bohraggregat 2, 2,2 kW / Markiereinrichtung, Referenzseite / Markiereinrichtung, Bedienerseite / Pneumatische Balkenwendestation / 7-armiger Auslauftisch / Verlängerungsrollenbahn, 5.300 mm Diese HUNDEGGER K2-5-450 wurde 2005 gebaut. Als robuste Abbundmaschine eignet sie sich hervorragend zum Sägen, Fräsen, Bohren und Schlitzen im Holzbau. Zu den Ausstattungsmerkmalen gehören eine 8,27 m Zuführlänge, ein ausziehbarer Holzauflage und mehrere Bohraggregate. Ideal für die präzise Verarbeitung von Holzelementen. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche: Djdpfx Adjx D Ibhogoul Fräsen (Holz)

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11441, Saat ini kami bekerja dengan versi berikut: 9.23.12.102733-12 Peralatan K2: mesin milling universal 4-sumbu 2 unit mesin bor gergaji jari di bawah mesin pembuat alur Stasiun pemutar balok hidrolik Dedpfx Adewvih Ajgeul Mesin berfungsi penuh dan dapat dilihat sesuai janji. Tersedia mulai 30/11/2025. Pembongkaran dan pemuatan ke truk dari perusahaan kami sudah termasuk dalam harga. Penjualan sebagai mesin bekas tanpa jaminan apa pun.

Kondisi: sangat baik (bekas), Lini pengupasan Cambio, diameter maksimum pengupasan 450 mm, konveyor pengumpan melintang dengan panjang 12,5 m Dusdpfxjwvhkvj Adgel

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, For sale: Hundegger joinery machine K2 450 (UF5) with comprehensive equipment, well maintained and reliable. Available is a Hundegger K2 joinery machine in good, regularly serviced condition. The machine comes from a well-kept working environment and has always been professionally serviced and cleaned. Manufacturer: Hundegger Model: K2-450 (UF5) Year of manufacture: 2006 Equipment: - Machine length: 11.76 m - Infeed: 8.51 m - Maximum timber length (infeed): 14.5 m - Maximum timber length (outfeed): 13.0 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m with flat chain conveyor - Infeed strand with shaft extension 2.2 m - Extendable timber support - Underslung swiveling cross-cut saw - Optional chip extraction via box - Interface for chip extraction system - 5-axis universal milling unit UF5 - Roll cutter - Finger cutter - Dovetail cutter - Combined support for vertically operating tools - Drilling unit 2.2 kW - Drilling unit 3.0 kW - Finger cutter - Combined support for horizontally operating tools - Drilling unit 2.2 kW - Swiveling drilling unit - Mortising unit 900 mm, guided on both sides - Longitudinal and cross groove milling cutter - Marking and labeling unit integrated in the table - Hydraulic beam turning station - Roller conveyor with ejector, 5.30 m - Network connection Available from: Autumn 2026 Location: Austria Price: on request Dusdpjx Azrkofx Adgsl All information is subject to change and prior sale. Sale from site. No warranty or guarantee. Inspection and test run available by appointment. If interested, feel free to contact us – we are happy to answer any further questions.

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 24.000 kg, p-HUN-K2I-2024 Dodoxx T Rdspfx Adgoul

Kondisi: baik (bekas), de Dusdpfjikvliox Adgel

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12762, ketinggian potong (maks.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Loading and feeding cross conveyor Under-table swiveling crosscut saw, 11 kW Dodpfx Adoxxa Dwsgjul 5-axis universal milling unit - UF5 Combination support for vertically operating tools Drilling unit 2.2 kW - vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) - horizontal drilling direction Slotting unit 7.5 kW Marking device at the rear (on the stop side) Fully automatic hydraulic beam turning station Transport and positioning system "two-hand operation" Electronic control with Hundegger production software Roller conveyor for wood outfeed with pusher 5-arm timber rack Safety devices and protective guarding Refined machine surface Extension for loading cross conveyor Infeed roller conveyor for 13 m wood length 5-axis universal milling unit - UF5 Turret milling unit - vertical from above Remote maintenance possible Special switch cabinet installation Control unit for waste disposal with operating buttons Extension roller conveyor 7.10 m, non-driven Liftable and lowerable safety impact barrier

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11174, We are selling our used Hundegger fully automatic joinery machine, model K2, year of manufacture 2001. - Infeed and loading cross conveyor (6-strand) - Under-table pivoting crosscut saw - Universal milling unit (UF4) - Combination carriage for vertically operating tools - 2.2 kW drilling unit – vertical - 3 kW drilling unit – vertical - Vertical finger jointing mill 7.5 kW - Combination carriage for horizontally operating tools - 2.2 kW drilling unit - 2.2 kW drilling unit – horizontally pivotable - Grooving unit - Rear marking unit - Bottom marking and lettering unit - Fully automatic beam turning station - Dovetail cutter - “Two-hand system” transport and positioning device - Electronic control system - Extension roller conveyor 5.30 m - 6-arm stacking table - Height-adjustable safety guard - Extension of the AWF + timber infeed for 13 m - Tooling included - ...For further details, please refer to the photos and contact us for more information. Dedpexvychjfx Adgjul The machine is in full working order and can be inspected by appointment. Available from spring 2026. All documents are available; regular servicing by Hundegger; no refurbishment. Dismantling and collection at buyer’s expense. Sale as a used machine excludes any warranty or guarantee.

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Connected load: 4 kW, weight: 1 t. Duedpfx Adjhlp Efogsl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, I am selling an automatic CNC machining center for BLOCK-HOUSE production, Hundegger K2i, year of manufacture 2011. Virtually as new. Year of construction 2015. Undertable circular saw with saw blade from 750 mm to 800 mm, 360° rotation, servohydraulic tilt 0–65°. Universal 5-axis unit with round cutter, end mill, and end mill, cutter head diameter 350 mm x 100 mm end mill. Combination holder for at least 5 tools with horizontal drilling unit, power up to 2.5–3.0 kW, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum processing depth 300 mm. Combination holder for at least 5 tools with horizontal drilling unit, power up to 2.5–3.0 kW, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum processing depth 300 mm. Positioning and clamping of workpieces by means of gripper arms. While the workpiece is being measured and brought to the desired position, the gripper arms stabilize and hold the workpiece as close as possible to the tool. The machined material can be rotated automatically. Tolerance +/- 2 mm over a length of 13 m. Fully automatic timber feed with infeed roller conveyor and crossfeed sliding transporter. K2i: Undertable inclined crosscut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support unit for vertically operating tools K2i: Drilling unit (2.2 kW) – vertical drilling direction K2i: Combination support unit for horizontally operating tools K2i: Drilling unit (2.2 kW) – horizontal drilling direction K2i: Marking unit (rear or operator side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic interface K2i: Roller conveyor for removal of timber elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: Machine with upgraded surface finish K2i: Extended K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote diagnostics (incl. portable video camera) K2i: Dovetail milling machine (with rotary knives) 60x28x16.5 Dedoxtxkxspfx Adgoul Ideal for timber construction! Available immediately.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fully automatic wood infeed with feed roller conveyor Extension of the infeed transversal conveyor and feed roller conveyor for timber lengths up to 13 m Loading and feeding transversal conveyors Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination carriage for vertically operating tools Drilling unit 2.2 kW Combination carriage for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse slot milling machine Rear marking unit (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device with two-hand control system Electronic control with EKP software Djdpfx Aswuppwedgoul Outfeed roller conveyor for timber including extension (without drive) Component ejector 5-arm timber rack Safety devices and guarding

Kondisi: bekas, Tahun pembuatan: 2010, Chalet construction machine Used, good condition, lightly used Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-approved up to 140 mm round log corner joints Sawing: 1x Djdevwfqqepfx Adgoul Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, sold as seen, without guarantee or warranty

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 625 mm, Hundegger joinery machine with mechanization 5 axes Working width: 625 mm Duodpfx Adjv Ubtcegsl with tools