Pusat pembubutan dan milling CNC

HURCO TMX8MYSi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 346 h, jumlah sumbu: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and has rapid traverse rates of 24 m/min in the X axis. If you are looking for high-quality turning and milling capabilities, you should consider the Hurco CNC TMX 8 MYSi turn-mill center. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Maximum turning diameter: 508 mm • Maximum turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Maximum main spindle speed: 4,500 rpm • Maximum sub-spindle speed: 6,000 rpm Bwsdeym T Itjpfx Am Tsn • Synchron spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar passage: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interrupt capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included, swivel holders are not included.

Kondisi: seperti baru (mesin pameran), Various versions available, such as round, hexagonal, or square, in smooth design, cross-knurled version, or with longitudinal and cross knurls. A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our website. Bwsdpfxeh Dmamj Am Ton We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 19.299 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 290 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 55 mm, diameter pembubutan di atas alas geser: 508 mm, Bidding obligates the buyer to collect the machine within the stipulated period, no later than 05/08/2025! No reserve price – guaranteed sale to the highest bidder! CNC Lathe with main and sub-spindle – unrefurbished replacement spindle included! TECHNICAL DETAILS Travel Travel X: 290 mm Travel Z: 560 mm Bwjdpfxew A Hpds Am Ton Travel W: 640 mm Travel Y: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. turning diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feeds Feed X: 24 m/min Feed Z: 30 m/min Feed W: 30 m/min Feed Y: 12 m/min Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Indexing time: 0.16 s Sub-Spindle Sub-spindle max. speed: 6,000 rpm Sub-spindle torque: 70 Nm MACHINE DETAILS Electrical connection: 66 kVA / 95 A / 400 V Pneumatic connection: 7 bar / 150 l/min Weight: 7,000 kg Operating Hours Power-on hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various guide channels Chip conveyor Tool setter Transformer Coolant unit Coolant tray Static and driven tool holders Replacement main spindle (unrefurbished) Various collets (size 65) Documentation (wiring diagrams, operator’s manual, etc.) Note: The main spindle emits noise. An unrefurbished replacement spindle is included.

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 6.848 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11580008023, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, produsen pengendali: Heidenhain, model controller: Heidenhain iTNC 530, tinggi total: 2.260 mm, panjang total: 22.950 mm, lebar total: 2.100 mm, lebar meja: 600 mm, panjang meja: 1.000 mm, beban meja: 200 kg, diameter meja putar: 600 mm, kecepatan rotasi (min.): 1 rpm, kecepatan rotasi (maks.): 3.000 rpm, berat keseluruhan: 6.000 kg, kecepatan spindel (min.): 1 rpm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 15.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 24, panjang alat: 315 mm, diameter alat: 130 mm, berat alat: 8.000 g, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, dmu-60-machine-en Bwjdeyt Ibnopfx Am Tjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 3.900 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 610 mm, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 3.900 h, Kami menawarkan Hurco VMX30 HSi dalam kondisi sangat baik dengan spindle HSK-A63 dan putaran 18.000 RPM. Perjalanan sumbu X: 762mm Perjalanan sumbu Y: 508mm Perjalanan sumbu Z: 610mm Mesin dilengkapi dengan opsi berikut: Pendingin internal 20 bar Pengganti alat 40 posisi Spindle HSK-A63 18.000 RPM Bsdpfx Amjx N E H Uo Tjwn Skala linear Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Perangkat lunak Ultimotion Perangkat lunak optimasi pergantian alat Catatan: Ragum tidak termasuk dalam penjualan mesin.

Kondisi: bekas, Tahun pembuatan: 2011, Technical details: Bwsdpfx Amewlhvws Ton X travel: 410 mm Y travel: 610 mm Z travel: 500 mm Spindle speed: 15,000 rpm Taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table size: 320 x 320 mm Table load: 100 kg Tool changer: 48 positions Total power requirement: 35 kVA Machine weight approx.: 7.4 t Space requirements approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining centre, NC rotary-swivel table, C-axis 360°, B-axis +30–120°, Chip conveyor, ICS 20 bar (internal coolant supply), 3D probe, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h “Machine on”, approx. 3,500 spindle hours

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, HURCO TMX8MYS H-TS8034 Tahun pembuatan: 2011 Bsdpexg D A Hefx Am Tjwn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, MAZAK INTEGREX i-100H Diameter pemesinan maks.: 600 mm Panjang pemesinan maks.: 590 mm Kecepatan milling maks.: 12.000 rpm Kecepatan spindle maks.: 6.000 rpm Mesin dilengkapi dengan: - Kontrol CNC Mazatrol SmoothAi - Majalah alat untuk 74 alat - Chuck tiga rahang KITAGAWA B-206, diameter 169 mm - Tool Eye - Akurasi input sumbu C 0,0001° - Sumbu Y Bedpfx Amjy Hwn Ej Tswn - Sumbu B 0,0001° - Paket pemrosesan 5-sumbu untuk SmoothAi - Pompa pendingin yang diperkuat 15 bar - Konveyor serbuk, pembuangan samping

Kondisi: bekas, Tahun pembuatan: 2011, trans-001 Bwsdpfx Aoyz Dcfjm Ton

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 640, tinggi total: 2.700 mm, berat keseluruhan: 9.600 kg, kecepatan spindel (maks.): 20.000 rpm, panjang produk (maks.): 3.000 mm, jumlah sumbu: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It is equipped with a Heidenhain iTNC 640 control unit, a spindle speed of 20,000 rpm, and a 120-position tool changer. The machine features a chip conveyor, a coolant system, and an internal coolant supply with 40 bar pressure. It is ideally suited for high-precision machining applications. Take the opportunity to purchase this DMG MORI DMU 60 EVO vertical machining center. Contact us for more information about this machine. • NC rotary tilting table • Tool changer: Yes, chain magazine with 120 positions • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; rinse gun; air blast through spindle center Bjdpfoy D Hvasx Am Tjwn • Swiveling viewing window • Electronic handwheel • Display languages: German/English • Footprint: 25 sqm • Condition: Very good, in operation Additional Equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage monitoring TRS2 • 4-color signal light • Extended M65 interface for Erowa Job Management System • Preparation for EROWA handling system (Operation Mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40