Mesin cetak injeksi

HUSKY Hylectric 120 HL120 RS35/32

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, en Fsdex Dkmgepfx Ahusga

Kondisi: bekas, Chiller, Cooling Water Recooler, Water Cooler, Chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 6 kW Rated output (chiller): 3 kW Refrigerant: R422D Fjdopu R Ncspfx Ahuoga Water tank capacity: approx. 35 liters Circulation pump delivery rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Mains connection: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Diameter of process piping/regeneration drain piping/compressed air piping: 50mm/50mm/8mm; maximum inlet temperature: 34°C; maximum hardness: 10/20°Fr; operating pressure min./max.: 2bar/8bar; minimum filtration rating: 5µm; maximum glycol content: 25%; dry air output: 50m³-150m³/h; dew point: below 50°C; maximum process temperature: 200°C; vessel volume: 30dm³-200dm³; maximum compressed air consumption: 300l-500l/h; machine dimensions (L/W/H): approx. 800mm/650mm/1100mm; weight: approx. 150kg. Documentation available. On-site inspection possible. Fedpfx Asuk I Etohusga

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), ENR 008 – Chiller Berpendingin Udara Kapasitas Pendinginan: 7,9 kW pada suhu aliran masuk/keluar 7/12°C dan suhu lingkungan 35°C Desain kompak dengan evaporator koaksial untuk transfer panas yang efisien Pompa internal P3 untuk sirkulasi air pendingin yang andal Tangki penyimpanan dengan volume air 50 l untuk penyangga singkat terhadap lonjakan beban Kipas dengan pengaturan kecepatan untuk pendinginan sesuai kebutuhan dan konsumsi energi yang rendah Sistem kontrol: kompatibel dengan sistem kontrol standar, ideal untuk integrasi yang mudah Cocok untuk aplikasi pendinginan berskala kecil, misalnya dalam industri plastik Fgedpfx Asfy Rykohuea

Kondisi: bekas, Tahun pembuatan: 2023, The used refrigeration unit operates with the low-GWP refrigerant R454B. It provides a cooling capacity of 70 kW at 7/12°C supply/return temperatures and an ambient temperature of 35°C. The unit is equipped with an internal P3 pump and an integrated buffer tank with a capacity of 410 liters. The fans are speed-controlled, and an internal bypass is installed. Thanks to its coaxial evaporator, the unit is ideally suited for process applications. Fgsdpshmkixjfx Ahusa

Kondisi: baru, Tahun pembuatan: 2023, Chiller with 25 kW cooling capacity at 7/12°C, internal P3 pump, integrated 110 l buffer tank, scroll compressor, coaxial evaporator for process applications Fedpfsgkan Ssx Ahujga

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 33,8 kW (45,96 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 460 kg, tegangan masuk: 400 V, lebar total: 1.000 mm, panjang total: 1.600 mm, tinggi total: 1.570 mm, masa garansi: 6 bulan, Kaltwassersatz RHOSS TCAEY133 33,8 kW, luftgekühlt Kälteleistung: 33,8 kW / 9,61 Tonnen (12/7 — 35°C) Baujahr: 2015 Kältemittelkreislauf: 1 Stk. Wärmetauscher: Plattenwärmetauscher Verflüssiger: Kupfer / Aluminium Verdichter: 1 Stk. Panasonic C-SCP510H38B (Scroll) Kältemitteltyp: R410A Anzahl der Ventilatoren: 1 Stk. Abmessungen: 1,6 x 1 x 1,57 m Gewicht: 460 kg Zustand: gebraucht, geprüft, voll funktionsfähig ZUSTAND, PRÜFUNG & EINSATZBEREITSCHAFT Der Kaltwassersatz unterliegt einer siebenstufigen technischen Prüfung sowie der Überprüfung betrieblicher Parameter. Die Anlage wird auf unserem eigenen Prüfstand getestet, inklusive Anschluss an Wasser (oder Glykol) und Anpassung der Betriebswerte nach Ihren Vorgaben. Nach Abschluss der Tests erhalten Sie von uns einen detaillierten Bericht mit allen Betriebsdaten und dem Gesamtzustand des Kaltwassersatzes. Der Kaltwassersatz ist transportfertig und einsatzbereit. Unsere Ingenieure unterstützen Sie bei der Auslegung der benötigten Kälteleistung, der Auswahl eines geeigneten Kühlsystems sowie der Konfiguration der gewählten Ausstattungsoptionen. GEWÄHRLEISTUNG & SUPPORT Fgjdpfx Ajwd R Rnohuja Die Qualität der Anlage wird durch eine Gewährleistung von 6 bis 36 Monaten bestätigt. Beim Erwerb eines Kaltwassersatzes über uns erhalten Sie zudem: - Kältemittelfüllung; - Ersatz von Öl und Kältemittelfilter (bei Gebrauchtgeräten); - technischen Support. LOGISTIK - Weltweite Lieferung möglich - Unterstützung bei Verladung, Exportdokumentation und Logistikabwicklung Lassen Sie sich umfassend beraten. Fotos, Videos und ein vollständiger Prüfbericht sind auf Anfrage umgehend verfügbar.

Kondisi: bekas, Tahun pembuatan: 2009, nomor mesin/kendaraan: PR21, en-GB Fgsdpfx Aeyhbd Sshusa

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 47 kW (63,90 hp), jenis arus masuk: tiga fasa, berat keseluruhan: 240 kg, tingkat kebisingan: 34 dB, frekuensi input: 50 Hz, Perlengkapan: pendingin beku, Ciat Dynaciat LGN 120 CIAT DYNACIAT LGN120 Liquid Chiller without Condenser. Manufacturer: CIAT DYNACIAT Year of Manufacture: 2005 Electronic Control Cooling Capacity: 34 kW Compressor: 1 unit - Hermetic SCROLL type Danfoss Performance SZ125S4CC Refrigerant: R407C Power Input: 11.5 kW Voltage: 3 Phase 400 V 50 Hz IP44 Current: 19.5 A Evaporator - Brazed Plate Heat Exchanger Heat Exchanger Capacity: 4.2 litres - Plate pattern optimized for high efficiency - 19 mm Armaflex thermal insulation Fgsdpfxovzrxcs Ahuoa Connection: 1.5" Machine Dimensions: Height: 121 cm Full Depth: 160 cm Width: 79 cm Length: 88 cm Weight: 250 kg - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator antifreeze sensor - Factory-installed evaporator water flow controller - 24 V control circuit - Microprocessor-controlled electronic touch control interface connection

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), berat injeksi: 2.424 g, This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is a fully electric injection molding system with a maximum throughput of 390 kg/h PET and a maximum shot weight of 2,424 g PET. The clamping unit is fully electric with toggle drive and features an integrated control for peripheral devices. Take this opportunity to purchase the Husky HPETL230E-RSE95D-95 all-electric injection molding machine. Contact us for more information about this machine. Additional equipment: • Mold Dehumidifier: incl. hood, spare parts package, and piping • Conveyor belt: double-sided preform filling system for cartons/cages Machine Advantages Technical Machine Benefits Fsdpox D Hvwsfx Ahusga • The package includes two machines as well as additional components such as pellet silos, pellet feed, contamination removal system for pellets, color dosing unit, and platform. Everything visible in the images is included. • Maximum throughput: 390 kg/h PET • Clamping unit: fully electric with toggle drive • Clamping plate: moveable, roller-guided • Type: split version • Dryer: DR815HT-G3 with 4,000-liter drying hopper (stainless steel, insulated) • Husky 1: 3 tools – 28-cavity neck ring, 17.8/26/30.3 grams • Husky 2: 2 tools – 38-gauge neck, 18/29 grams Additional Information Clamping Force Clamping unit: Fully electric with toggle drive Clamping plate: Moveable, roller-guided Control System Control: Integrated control system for peripheral devices Display for cooling water temperature/pressure (inlet and return) Control output for color dosing unit Lubrication system: automatic Re-mixing device: integrated in the nozzle Tooling: H-PET injection molds with 48 cavities Preform weight: 17.8 g and 30.26 g Core dimensions: 50 x 140 mm Includes: 3-position take-out plate, basic spare parts package H-PET injection mold with 32 cavities Preform weight: 18 g and 29 g (38 mm Bericap) Core dimensions: 63.5 x 140 mm Includes: 3-position take-out plate, basic spare parts package Functions: Temperature monitoring and setting Continuous level gauge Variable dew point setting Granulate conveying: Hot transport of granulate via P07 vacuum unit to HAD400 booster bin Color Dosing Units For solid color: Volumetric, 4 dosing screws For liquid color: 4 dosing pumps Preform Production Specifications Preform weight: 17.80 g Neck finish: PCO1881 LW Length: 89.35 mm Wall thickness: 3.06 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle time: 12.4 ± 0.3 s Preforms per hour: 13,935 Annual production (95% availability): 111,205,000 Throughput (kg/h): 248 Power consumption: 506 Wh/kg PET Preform weight: 29.00 g Neck finish: Bericap 38 Length: 108.59 mm Wall thickness: 3.16 mm Base: 2.42 mm Shape: Bell Cavities: 32 Cycle time: 13.7 ± 0.3 s Preforms per hour: 8,409 Annual production (95% availability): 67,101,000 Throughput (kg/h): 244 Power consumption: 532 Wh/kg PET Preform weight: 18.00 g Neck finish: Bericap 38 Length: 82.04 mm Wall thickness: 2.70 mm Base: 2.20 mm Shape: Bell Cavities: 32 Cycle time: 11.3 ± 0.3 s Preforms per hour: 10,195 Annual production (95% availability): 81,353,000 Throughput (kg/h): 184 Power consumption: 506 Wh/kg PET Preform weight: 30.26 g Neck finish: PCO1881 LW Length: 122.30 mm Wall thickness: 3.00 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle time: 14.7 ± 0.3 s Preforms per hour: 11,755