Mesin press hidrolik Hyundae Cetta HHP-3

Hyundae CETTA HHP-3 30Kn

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. Duodpfodyah Ssx Abhon - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Kondisi: baru, Tahun pembuatan: 2026, Consisting of a bale breaker for large bales, type MHB, and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Approx. 15 weeks production time) Suitable for round or square bales. Including frequency inverter (controls the speed of the scraper floor). The bales are placed on the scraper floor and the cutter head feed is switched on. The cutter head tines tear the straw from the bale and throw it into the hopper. Ideally, this machine is combined with a straw shredder. Technical data for bale breaker: Capacity: 1–2 bales per hour Up to a maximum of 600 kg per hour (depending on the installed sieve size in the straw mill, kW rating of the straw mill). Without a straw mill, the bale breaker can process up to 900 kg/hr of straw. Maximum square bale size: 2400 x 1200 x 800 mm (LxWxH) Cutter head motor: 5.5 kW, 380 V Scraper floor feed: 0.75 kW, 380 V Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the larger straw shredder (18.5 kW): +€3,940 net Duodpfxob Nulhj Abhon Technical data, MHZ with special feed hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Selectable perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options at extra cost: Feed auger: +€970 net Cyclone (suspension by customer) *should be no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional rotary valve (renders material pressureless) +€5,750 net Control system: from €1,620 net Special bale breaker extension 3m (other dimensions upon request) +€9,750 net Briquetting press MPP 180 S; little-used demonstration unit 70 mm briquette – up to max. 100 kg/hr from €39,700 net * Larger machines available on request --- Description: muetek bale breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ/MHB series are characterized by their robust design and heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor onto which the bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor pushes the bale against the cutter rotor; the feed speed is adjustable. The cutter rotor is fitted with multiple teeth which rip open the straw bale. The separated straw is then discharged. --- The machines are generally designed for dry materials: - Straw - Hay --- Processing hemp bales is only possible with a special bale breaker Surcharge approx. €9,720 net (depending on configuration) Straw mills are not suitable for processing hemp. Material requirements: Maximum moisture content: 12%

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Duodjfxyhfspfx Abhon Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Tahun pembuatan: 2023, Veneer Press OMC PL 105 LC 30/13 Water-Based Working area: 3000x1300 mm Opening width: 400 mm 6 cylinders, diameter 85 mm Total pressure: 105T Dsdjiypzlopfx Abhoun Maximum heating temperature: 85°C Logic control system Machine operation via touch panel Readouts: temperature, pressing force, shelf opening time, loading area calculator, adhesive process programming Power: 21 kW CE certificate Year of manufacture: 2023 Machine available on order Brand new machine

Kondisi: baru, Tahun pembuatan: 2025, New machines directly from a proven and experienced manufacturer. No risk! We offer you a wide selection of sheet metal bending machines and guillotine shears. What you can expect from us: speedy and secure delivery without complications; expert advice and service during the warranty period and beyond. Guaranteed. Consultation, delivery, or maintenance? Always a pleasure. For individual machines or complete packages? No problem. We know all our equipment inside and out. For years. And as the manufacturer, we are always up to date. We look forward to hearing from you. Folding Bench RED-2200/0.8 incl. transport wheels Bending machine folding bench with lateral cutouts for top-to-bottom bending. Thanks to this feature, you can finish your window sills. The machine’s design allows for a 6 cm clearance above and below for forming workpieces. This is a modern sheet metal bending machine capable of bending from three sides. Technical specifications: - Maximum working width: 2080 mm - Bending capacity: up to 0.8 mm (steel sheet) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Bending beam thickness: 15 mm Dujdpfx Absg In Azshjn - Upper beam can be raised in three positions - Upper beam stroke: 80 mm - Degree scale - Angle stop - Rear rack for material support - Front gauge stops - Weight: approx. 250 kg Roller shear (max. cutting capacity 0.8 mm/steel) available for an additional 350 euros - Manual seam closer available for an additional 75 euros The machine complies with CE guidelines and comes with a 12-month warranty. Delivery costs: 180 euros Price: 2200 euros Delivery time: every week Cash payment upon delivery We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community delivery, or with 19% VAT applied.

Kondisi: bekas, de-to-en-01 Dujdpfxow E Hz Ej Abhsn

Kondisi: bekas, 4,000 running meters of structural profiles, C-shape, galvanized Used, in good condition, see photos Length per piece approx. 12 m Profile size: 110 x 90 mm Material thickness: approx. 3 mm Negotiable price: € 4.90 per running meter, net ex stock Goods in stock. Transport and assembly available upon request. Viewing possible at any time by appointment. Further information available on request. Dedpfour Ikrsx Abhoun We always have over 5,000 running meters of pallet racking from various manufacturers in stock. Modifications and errors in technical data, descriptions, and prices as well as prior sale reserved! Please see our Terms and Conditions, all prices excl. VAT ex stock.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Price when purchasing a powder coating system – negotiable!! • Electrical data 100-240V 50-60Hz • Powder output up to 200g / min • Air consumption up to 250L / min at 6 bar • Air quality / moisture less than 1.3 g / nm3 • Air quality / oil less than 0.1 mg / nm3 Powder Coating Gun Data • Output voltage 100 kV • Max. output current 100 µA • Hose length 6 m – antistatic hose • Polarization Negative • Compliance ATEX 2mJ Description • Manual coater for quick color changes directly from the box • Intuitive 7" touch display • Automatic cleaning function – gun rinsing • Up to 20 user-defined programs • 3 automatic programs • Remote control of powder feed and program change from the handle -- Equipment • PSS series controller • ProfiJector RI-1 blunt powder injector • ProfiGun powder gun with quick coupling and remote control • Hose set • Stand with vibrator and extraction unit with fluidization PSS Controller • 7-inch touch panel operable with gloves Dsdsg U I Ugopfx Abhjun • 3 automatic programs (overcoating, difficult-to-reach areas, flat surfaces) • Graduation in 0.1kV and 0.1uA increments • Advanced pneumatic valves for precise air dosage control (romer – patent pending) • Real air flow measurement responds to errors such as pressure loss or system clogging • Advanced diagnostic tools • Capability to name programs • Option to control external master controllers via ModBus protocol (A series) ProfiGun PM-1 Gun • Lightweight, ergonomic gun, perfectly balanced with a contoured handle • The ceramic cascade with up to 100,000V efficiently charges all types of powders • New nozzle generation ensures perfect powder penetration into complex shapes • Profiled nut enables a good grip • The conductive, high-carbon handle provides excellent grounding for the operator • Spray gun made from high-impact resistant special materials • Fully disassemblable design with interchangeable powder pathway tube • Spray gun is patented in the USA and EU • Cascade polarity – negative ProfiJector Powder Coating Pump Description • Design of a new efficient injector • Most effective feed angle proven by research • Saves powder and air compared to right-angle injectors • Offers comparatively low operating costs versus other pumps • Injector is protected by a European patent

Tahun pembuatan: 2025, Kondisi: baru, Gravity belt filter system – new – electrically and mechanically prewired, plug-and-play, suitable for JUNG HF50 / JF520 / JF625 Dedohcn I Tepfx Abhjun - Please specify the machine type when making an inquiry -

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 145 K, Technische Daten: Dodpfx Absu At Thsheun - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm - Drill spindle taper: Morse taper 3 (MK 3) - Drill spindle stroke: 150 mm - 9 spindle speeds: 104 – 1400 rpm - 2 feeds: 0.1 / 0.2 mm/rev - Throat depth: 290 mm - Maximum distance spindle to table: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.1 / 1.3 kW - Required space: approx. W 600 x H 2100 x D 900 mm - Weight: approx. 420 kg - Equipped with: - Forward / reverse operation - Coolant device - Keyless drill chuck 1–13 mm - Work lighting