Mesin bubut CNC

Hyundai SKT 210 SY

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. Fedpjfxyhfefx Aagjpd The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: 2013, Technical details: X-axis travel: 760 mm Y-axis travel: 460 mm Fpedpfx Aaevhbpdsged Z-axis travel: 460 mm Control unit: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 – 95 Nm Spindle taper: SK40 Tool magazine with: 24 stations Table size: 900 x 410 mm Max. table load: 350 kg Feed range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 V DC Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Chiller dimensions: 1.7 x 0.7 x 1.35 m Machine dimensions (LxWxH) approx.: 1.9 x 2.3 x 2.45 m TNC 620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), network integration possible Safety doors with impact-resistant plastic windows Chip conveyor Hydraulic unit Coolant treatment system Rittal chiller on control cabinet Work area interior lighting Handheld control unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 5.277 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, berat benda kerja (maks.): 300 kg, lebar meja: 500 mm, panjang meja: 630 mm, berat keseluruhan: 8.500 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 22.400 W, hidung spindel: CT 40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, konveyor serpihan, de Fpodpjx Nf Tbjfx Aaged

Kondisi: bekas, nomor mesin/kendaraan: 4131, Order no. Lg 34422 High-performance punching press BRUDERER BSTA 60 H from ongoing production. Stroke adjustment requires repair. Without soundproof enclosure and without coil feed line. Fpedpeinzdlsfx Aagjd Feed unit BBV 202/120

Kondisi: baik (bekas), Tahun pembuatan: 2010, X Y Z: 1270 x 508 x 508 mm, meja 1324 x 457 mm, 12000 rpm, BT 40, Kontrol HAAS, ATC 24 stasiun, 40HP, auger chip, pendingin, meja trunnion 5-sumbu Haas TR210. Fpedoxpw Rvepfx Aagod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, Pressing force: 3600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (X/Y/Z): 1300 mm/2000 mm/2230 mm, Weight: approx. 6300 kg. Fsdpfxor A Eifo Aagjpd

Kondisi: bekas, Achse X 30,0 in 762 mm Achse Y 16,0 in 406 mm Fodpeiypzdofx Aagepd Achse Z 16,0 in 406 mm Zur Inspektion bereit Bereit zur Auslieferung

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Fpsdpera Rr Eofx Aagjd Feed controller HDS 50 BSA decoiler NO20/400V-AP

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.540 mm, diameter pembubutan: 660 mm, daya motor spindle: 30 W, kecepatan spindel (maks.): 3.000 rpm, lubang spindel: 102 mm, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 1.585 mm, kecepatan rotasi (maks.): 12.000 rpm, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Pusat pembubutan 7-sumbu BEKAS dengan spindle bantu, kepala atas yang dapat dimiringkan pada sumbu Y, dan penukar alat. Fpjdpfex Dc E Iox Aaged

Kondisi: bekas, Tahun pembuatan: 2003, Kontrol BWO Diameter lingkar kepala maks. 700 mm Diameter lingkar kaki min. 50 mm Tinggi profil maks. 35 mm Kecepatan putaran spindle 0 - 5400 min-1 Beban meja maks. 500 kg Dimensi mesin 370x220x300 cm Berat total sekitar 15000 kg Jam operasi 94082 jam Perlengkapan: Kontrol BWO Semua sumbu dikendalikan CNC Ekstraksi kabut oli Sistem pembersihan cairan pendingin dengan unit pendingin Unit penyeimbang Dittel Aksesori: Batu gerinda Ø400mm inklusif Flens cakram gerinda 1 roller dressir berlian prod. Dr. Kaiser Ø160mm Pusat konter Panel kontrol listrik: Fpsdpfx Ajxt Ur Sjagjd Lebar 70cm x panjang 280cm x tinggi 220cm Mesin Lebar 220cm x panjang 370cm x tinggi 300cm Instalasi cairan pendingin: Lebar 170cm x panjang 240cm x tinggi 250cm