CNC lathe

HYUNDAI WIA F400 CNC

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Dcjdpfx Aaor A Hcbjvep Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, #de-ab190622001 Dcodsxwyw Ujpfx Aavop

Kondisi: bekas, Tahun pembuatan: 2015, CMZ TX 66 Y2 Quattro Tahun 2015 Fanuc 31i Diameter pemotongan maksimum (mm) 255 Jarak antara pusat spindel (mm) 639 Kecepatan maksimum (rpm) 4000 Diameter batang maksimum 66 mm Sumbu X 190 mm Sumbu Y +- 40 mm Sumbu Z 500 mm Dcjdozp Ituopfx Aavjp Chuck 210 mm 2 kepala BMT 55 2 spindel 2 x sumbu Y Diameter lubang spindel 66 mm Probe perkakas Pengumpul serpihan Perlengkapan beserta mesin Dokumentasi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 2.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G3158-0645, de Dsdpfow Dcdyjx Aavjcp

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, tinggi total: 2.700 mm, panjang total: 2.800 mm, lebar total: 3.550 mm, lebar meja: 600 mm, panjang meja: 1.200 mm, beban meja: 800 kg, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 8.000 rpm, hidung spindel: SK40, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, V10 Vertical precision machining center with cross-table design Dsdjvtz Dxjpfx Aavecp Machine Specification: Control: FANUC 0i-MF Travel: X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Spindle nose to table surface: 150 - 750 mm Precision: Positioning accuracy: 0.008/0.006/0.006 mm (X/Y/Z) Repeatability: 0.005/0.004/0.004 mm (X/Y/Z) Table: Table size: 1,200 x 600 mm Max. load: 800 kg T-slot (table): 5x18x100 mm Spindle: Drive type: Belt drive Max. speed: 8,000 rpm Power: 7.5/11 kW Tool holder: SK40 Drawbar: MAS P40T-I (45°) Feed Rates: Rapid traverse (X/Y/Z): 36/36/36 m/min Cutting feed rate: 15/15/15 m/min Tool magazine: Capacity: 24 stations Type: SK40 Max. tool diameter: 80 mm Max. tool diameter (adjacent free): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Indexing (tool to tool): 2.5 secs Power supply: 30 kVA Machine weight: 6.5 t Dimensions (LxWxH): 2800 x 3550 x 2650 mm Standard configuration: • Control: Mitsubishi M80VB • 8,000 rpm belt-driven spindle • 24-position automatic tool changer • Pneumatic and hydraulic lubrication system • Coolant system • Internal coolant tank with chip conveyor • Full enclosure • Air gun • 3-color signal tower • Standard accessories • Chip cart • CE compliant Options: • SIEMENS 828D • FANUC 0i • 10,000 rpm belt-driven spindle • 12,000 rpm direct drive spindle • Spindle oil chiller • NC rotary table, 4th axis • Tool measurement system • Tool magazine safety cover • Water gun • Oil skimmer • Chip conveyor with chip cart • Oil mist extraction (preparation) • Alternative coolant tank for aluminum chips • Air conditioning for electrical cabinet • Glass scales (not available for V6)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used 3D Coordinate Measuring Machine Mitutoyo Euro C Apex 544 On our marketplace, we offer a pre-owned 3D coordinate measuring machine Mitutoyo Euro C Apex 544, which maintains impressive reliability and measurement accuracy despite its older year of manufacture. This machine has been thoroughly checked and tested by our experts to ensure it continues to meet the high standards demanded in metrology. The Euro C Apex 544 stands out with its precise measurements, robust construction, and durable components, making it an excellent choice for quality control in manufacturing even today. It has been carefully calibrated and inspected by us, ensuring it is ready for immediate use in your production environment. Technical Data: Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer’s accuracy: ±2.9 µm + 0.3L/100 µm Drive: CNC-controlled, fully automated measurement sequences Dcsdpouyiu Nofx Aavop Probe system: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Tested Reliability: This pre-owned machine has been rigorously inspected, tested, and calibrated by our metrology specialists to guarantee continued precision performance. Consistent Precision: Thanks to its granite construction and proven Mitutoyo engineering, the machine delivers highly accurate and repeatable measurements, even after years of service. Automation and Efficiency: The CNC control and Renishaw TP200 probe system allow for fully automated, efficient measuring routines to optimize your production processes. Reliable Investment: As a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies seeking a certified and tested 3D coordinate measuring machine. This machine is the ideal choice for businesses looking for a proven, inspected solution for quality control applications. Despite its age, it has undergone comprehensive testing and calibration to ensure maximum reliability and precision for your production needs.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 400 mm, diameter pembubutan: 420 mm, daya motor spindle: 22 W, kecepatan spindel (min.): 30 rpm, kecepatan spindel (maks.): 3.000 rpm, jarak pergerakan sumbu X: 268 mm, jarak gerak sumbu Z: 488 mm, gerak cepat sumbu X: 20 m/menit, pergerakan cepat sumbu Z: 24 m/menit, jenis arus masuk: tiga fasa, tinggi total: 3.210 mm, panjang total: 3.600 mm, lebar total: 1.900 mm, berat keseluruhan: 6.000 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin bubut vertikal CNC DOOSAN bekas dengan 3 sumbu, alat bermotor, dan poros C Dsdsx Sqafepfx Aavocp

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Model: OKUMA MULTUS U3000 2SW 1500 (Pusat Pemesinan Bubut dan Frais CNC) Pengendali: OKUMA OSP-P300S Panjang bubut: sekitar 1.500 mm Diameter bubut maks.: hingga 650 mm Sistem perkakas / Antarmuka: HSK-A63 Spindel utama: Daya penggerak: 22 kW Torsi: 427 Nm Kecepatan maks.: 5.000 rpm (2 tingkat transmisi) Cone spindel: Cone pendek, ukuran 6 (KK ukuran 6) Bearing depan spindel: Ø 120 mm Lubang spindel: Ø 80 mm 3. Spindel lawan (Spindel motor Okuma) Pergerakan: Dapat bergerak pada sumbu W Daya penggerak: 22 kW Torsi: 427 Nm Kecepatan maks.: 5.000 rpm Cone spindel: Cone pendek, ukuran 6 (KK ukuran 6) Bearing depan spindel: Ø 100 mm Lubang spindel: Ø 62 mm Spindel perkakas / Spindel frais (Spindel motor Okuma) Daya penggerak: 22 kW Torsi: 120 Nm Kecepatan maks.: 12.000 rpm Pemasangan perkakas: HSK-A63 Sumbu & Rentang gerak Dedpezu I U Ajfx Aavjcp Sumbu C: 360° (Pembagian / Pemosisian dalam langkah 0,001°) Sumbu Y: Langkah +125 mm / -125 mm (Total langkah 250 mm) Sumbu B: 240° (Pembagian / Pemosisian dalam langkah 0,001°) Majalah perkakas & Majalah perkakas revolver (ATC): 120 tempat Revolver bawah: 12 stasiun dengan sistem pemasangan langsung “radial” Panduan revolver: Sumbu ZB dengan panduan bergulir rol silinder Sumbu XB dengan panduan geser Sistem pendingin / Suplai pendingin internal (IKZ): maks. 20 bar (termasuk filter kantung) Pendingin luar spindel perkakas: maks. 8 bar Aksesori: Pemuat pendek LNS Quick Load Seri O III

Kondisi: bekas, Tahun pembuatan: 2014, Produsen Citizen Machinery Miyano Co., Ltd., Jepang Model BNA 42DHY2 Tahun Pembuatan November 2014 Nomor Seri DK4Y1085 Pengendali Fanuc Series 0i TD CNC Jenis Mesin Pusat Pembubutan CNC dengan Dua Spindel dan Sumbu Y Negara Pembuatan Filipina Kapasitas Kapasitas Batang Maksimum: 42 mm Dcjdpjzmh R Uefx Aavop Diameter Pembubutan Maksimum: Sekitar 42 mm Panjang Pembubutan Maksimum: Sekitar 100 mm, tergantung pada alat penjepit Spindel Utama: Spindel terpasang Spindel Tambahan: Ya Sumbu Y: Ya Sumbu C: Spindel Utama dan Spindel Tambahan Turret: Turret dengan 12 stasiun dan alat potong yang dapat bergerak Alat Potong yang Dapat Bergerak: Ya Rentang Gerak Sumbu X: Sekitar 135 mm Sumbu Z: Sekitar 320 mm Sumbu Y: Sekitar ±40 mm Spindel Kecepatan Spindel Utama: Hingga sekitar 6.000 rpm Kecepatan Spindel Tambahan: Hingga sekitar 6.000 rpm Ujung Spindel: Kapasitas batang 42 mm Gerakan Cepat Sumbu X: Sekitar 24 m/menit Sumbu Z: Sekitar 30 m/menit Sumbu Y: Sekitar 12 m/menit Kelistrikan Sumber Daya: AC 200 V Fasa: 3 Fasa Frekuensi: 50 / 60 Hz Daya Terukur: 30 kVA Arus Beban Penuh: 87 A Rating Pemutus Sirkuit Pendek: 2,5 kA Berat Mesin Berat: 3.100 kg Peralatan yang Terlihat pada Mesin Ini Pengendali Fanuc Series 0i TD CNC Dua Spindel Sumbu Y Sumbu C Alat Potong yang Dapat Bergerak Collet Hidraulik Sistem Pendingin Pelindung Percikan yang Tertutup Sepenuhnya Tombol Berhenti Darurat Roda Tangan Elektronik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 16.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.500 mm, Head mounting station TUPC CNC micro-indexing head A-axis: 360,000 x 0.001 mm C-axis: 360,000 x 0.001 mm SELS spindle extension L=500 mm CTS internal coolant supply ATC chain tool changer, 60 positions Dcjdpjxpfkkefx Aavop Hydrostatic guides Optional T-slot plates 5600 x 1875 mm (2x) + 4000 x 1875 mm X-axis travel: 16,000 mm Y-axis travel: 3,500 mm Z-axis travel: 1,500 mm Spindle power: 80 kW Spindle speed: 4,000 rpm Tool holder: SK59 ISO/BT/MK Feed rate X-axis: 25,000 mm/min Feed rate Y-axis: 25,000 mm/min Feed rate Z-axis: 25,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 24,000 mm Width: 6,500 mm Height: 6,500 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract terms. We recommend verifying all critical details.