Mesin thermoforming

ILLIG UA 250 4G BE 250 PR FHZ

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.950 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 916 kg, panjang total: 1.200 mm, lebar total: 1.100 mm, tinggi total: 2.000 mm, produsen motor: Atlas Copco, daya: 55 kW (74,78 hp), jenis bahan bakar: listrik, laju aliran volumetrik: 650 m³/jam, tekanan kerja: 13 batang, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Atlas Copco Kompresor Sekrup Dkedjx Dfmzjpfx Ahuek Model: FA55VSD+ Tahun pembuatan: 2020 Jam kerja: 8.950 jam Daya nominal motor: 55 kW Tekanan: 4,0 hingga 13,0 bar Kapasitas aliran: 182,5 l/dtk atau 10,9 m³/menit Tegangan/Frekuensi: 400 V / 50 Hz Dimensi (Panjang/Lebar/Tinggi): sekitar 1.200 / 1.100 / 2.000 mm Berat: 900 kg Kompresor berfungsi dengan baik dan telah diperiksa serta dirawat secara rutin. Saat ini masih terpasang listrik dan dapat dipantau selama operasi. Pengering udara terkait serta tangki udara tekan dapat dibeli secara opsional (lihat penawaran lainnya).

Tahun pembuatan: 1993, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: RH 241-1-50-30v, 217ef9a0 Dsdpfopy Eygjx Ahujkk

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Dksdpfx Ahokvnumjuok Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm Dedpfx Ahog Tzbhjuskk • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (LxWxH): 2100 x 760 x 1250 mm • Weight: 470 kg

Kondisi: baik (bekas), Wohlenberg 132 TS ASE Papierschneidemaschine Djdjwt Sq Ujpfx Ahujkk Maschine in einwandfreiem Zustand, sofort einsatzbereit für die Produktion. Baujahr: 2015 Sofort ab Lager verfügbar. Ausgestattet mit dem automatischen Abschnittentsorgungssystem ASE. Die Schneidemaschine kann als Stand-alone-Lösung oder integriert in Schneidsystemen verwendet werden. Die Programmgenerierung erfolgt im Menü und umfasst eine Vielzahl von Schneidaufgaben, z. B. Einzelschnitt, Programmierung, Mehrfachschnitt, schnittloser Pressvorgang, automatische Istwertübernahme. Wohlenberg Premium-Schneidemaschinen werden in Solms, Deutschland, gefertigt. Besondere Merkmale der Wohlenberg-Maschine: – Interaktive Benutzeroberfläche – 18,4“-Touchscreen – MIS-Integration (optional) – USB-Schnittstelle – Ethernet-Schnittstelle – Betriebssystem Windows CE – CIP-Datenmodul – Positionierung über elektronisches Handrad – Optimierter Schneidzyklus – Programmierbarer Pressbalkendruck – Automatische Anpassung des Pressbalkendrucks an die Schnittbreite – Automatischer Messerwechsel von vorne – Schneller Messerwechsel – Neues Maschinengehäuse aus einem Guss = höhere Stabilität – Wartungsfreie elektromagnetische Kupplung Technische Daten: Schnittlänge: 1.320 mm Maximale Stapelhöhe: 165 mm Einlegetiefe: 1.325 mm Kleinster Schnitt mit Blech unter dem Pressbalken: 77 mm Kleinster Schnitt ohne Blech unter dem Pressbalken: 20 mm Maximale Vorschubgeschwindigkeit des Tisches: 300 mm/s Maximale mechanische Messerleistung: 44 Hübe/min Tischführung: oberhalb des Arbeitstisches Leistung des Hauptmotors: 4,5 kW Nettogewicht: 3.410 kg Die Maschine wird geliefert mit: einem Ersatzmesser, Stäben, Druckplatte, Dokumentation, Werkzeugen und einem Förderband.

Tahun pembuatan: 2006, Kondisi: diremajakan ulang (bekas), HYDRAULISCHE PRESSE MECAMAQ DRUCKKRAFT 350 t HUB 350 mm TISCH (LINKS-RECHTS) 600 mm TISCH (VORNE-HINTEN) 750 mm Dkedpfsfmqqljx Ahuok LEISTUNG 15 kW Abmessungen: Höhe: 2,9 m Breite: 1,9 m Länge: 1,3 m Gewicht: 5.700 kg

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 610 mm, berat benda kerja (maks.): 1.500 kg, tinggi total: 24.920 mm, panjang total: 43.670 mm, lebar total: 30.700 mm, panjang meja: 1.600 mm, lebar meja: 700 mm, daya motor spindle: 11 W, pergerakan cepat sumbu Z: 24 m/menit, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, hidung spindel: Iso 40, kecepatan spindel (maks.): 8.000 rpm, kecepatan spindel (min.): 40 rpm, diameter alat: 75 mm, panjang alat: 250 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, NEW Vertical Machining Center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Included accessories: - Rotary table preparation - External spindle air blast - Left-side auger-type chip conveyors - Automatic high-pressure coolant system through the spindle at 20 bar Dedperkn Iiefx Ahuekk - Workpiece washdown gun - Enclosure base wash system - 390-liter coolant collection tank - 3-color end-of-cycle signal lamp - Full auto power-off system

Kondisi: sangat baik (bekas), extruder-3d-filament-25-25-en Djdpfx Aoxwvqqehuskk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, jam operasional: 41.685 h, Technical Data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. forming depth/negative, mm: 100 Cycle rate/min - max.: 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Dsdpfx Ajq A Um Rjhuekk Heat to be dissipated: with top heating approx.: 10,260 KJ/h with top and bottom heating approx.: 17,715 KJ/h Special features: Hollow-bottom fixture available Control cabinet: included

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 53.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206432, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 570 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, lintasan ejektor: 225 mm, berat keseluruhan: 7.450 kg, Perlengkapan: dokumentasi / manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine for sale: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for more than 25 years. Current note – Tax advisory and benefit for used machinery As of 01/07/2025, used machinery is also eligible for a special depreciation allowance of 30% per annum for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well-maintained – German origin Extras: - Complete high-wear resistant thermoplastic injection unit, 50 mm - Screw in HC (high corrosion) version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastics processing - Open nozzle, 50 mm - Extended nozzle tip, 50 mm - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping plate set, 570 mm, central ⌀ 125 mm - 2x air eject systems with pressure regulator - Air eject connection 1 - Selector unit connection - 1 core pull for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67 standard), 50-pin - Central computer interface ARBURG - Additional socket distributor: 1 CEE, 1 Schuko - Serial printer interface, USB - CompactFlash interface for data storage - Operator authorization via chip card according to EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Colour dosing unit interface - Manually adjustable cooling circuits - Machine-related cooling circuits regulated - Advanced monitoring equipment package - Advanced movement package - Production control equipment package - Optimization/operation support package - Quality assurance equipment package - Documentation equipment package Complete documentation included Injection unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Injection volume: 392 cm³ Clamping unit: - Clamping force: 200 tons / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platen: 795 x 795 mm - Minimum mould height: 300 mm - Maximum platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Drive capacity: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Loaded free onto buyer’s truck or delivered free to destination against freight charge Available from our Hannover/Germany warehouse Information regarding the machines we offer and our company: - We only sell our own stock, machines purchased from ongoing production, available from our Hanover warehouse - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from reputable companies with consistent maintenance and care - All machines offered can be inspected at our warehouse Djdpfxjw Tt R Ie Ahujkk