KELUARAN IMA AGREGAT HSK 1

IMA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 2.000 mm, panjang total: 6.000 mm, berat keseluruhan: 3.000 kg, ketinggian potong (maks.): 35 mm, DETAIL TEKNIS Nkodpfx Absyttdhevsw Lebar kerja minimum: 520 mm Lebar kerja maksimum: 2.200 mm Tinggi potong (maks.): 35 mm Tinggi celah pada mata frais yang tersedia maks.: 35 mm Kecepatan pemajuan: tidak dapat diatur (tetap, nilai tidak disebutkan; perkiraan sekitar 8–10 m/menit) DETAIL MESIN Jenis arus masuk: Arus bolak-balik (AC) Dimensi & Berat Dimensi (P x L x T): 6.000 x 4.000 x 3.000 mm Berat: 3.000 kg PERLENGKAPAN Kabine peredam suara Lima sumbu pemrosesan per sisi, dapat disesuaikan secara mekanis

Kondisi: bekas, nomor mesin/kendaraan: 007350, X-axis working range: 4000 mm Y-axis working range: 1400 mm Working area: With vacuum console supports Nedpfswcyd Iox Abvjkw Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Nkjdpfxjyttrxo Abvew Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: sangat baik (bekas), de-hu-01 Nkodsyxl Siepfx Abvjw

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Nkedpfsxraimex Abvew Tool magazine for 16 tools Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Kondisi: bekas, Tahun pembuatan: 1994, Lokasi gudang: Nattheim Nsdpfx Abowmm Nrsvskw

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Njdpfx Abjvxhnusvekw Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Vacuum system with programmable suction units for lifting panels onto the conveyor belt Panel outfeed system with motorized conveyor belts

Kondisi: bekas, nomor mesin/kendaraan: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Working surface: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Nsdpfjwuz N Nox Abvekw Number of tool stations: 16

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for stack discharge from the unloader Njdpfx Abewbp Nwovekw No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Kondisi: sangat baik (bekas), CNC Machining Center (Point-to-Point) – 5 Axes (ROBOT Head) Gantry-type construction Control system: ICOS CNC – Software: IMAWOP / (Optional: IMAwinCAD) Safety enclosure for the working head Clamping table with 8 consoles LED positioning system on the X-axis for console placement and Y-axis for vacuum clamp positioning Automatic tool change system 2 rotary tool changers – magazine/tool positions (8) + TC8 (18) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity: 140 m³/h) Separate electrical and control cabinet. Total connected load: 23 kW Nodpfefin Saox Abvokw WORKING UNITS (TOP SIDE): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (Drilling head motor power: 1.2 kW x 4) 1 grooving saw unit, diameter 125 mm, swivels 90° in X-Y direction 1 vertical main spindle (milling unit) Robot head (HSK F63) Vertical main spindle power: 9 kW Independent Z-axis with 650 mm stroke A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Kondisi: bekas, Tahun pembuatan: 2005, Ukuran pemrosesan: 3000 x 1600 x 180 mm Pompa tekanan tinggi 60 HP / 45 kW Model E-60 Tekanan kerja 4.130 BAR Konsumsi air 4,69 liter/menit Perangkat lunak: Watercad-CAM Optimalisasi pemotongan otomatis Lokasi penyimpanan: pelanggan Nkedpfxsxgfbqo Abvew

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam Nodpfxofi Tg He Abvokw No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: bekas, nomor mesin/kendaraan: 007842, arbeitsbereich-achse-x-5000-mm-arbeitsbereich-achse-y-1200-mm-ar beitsebene-mit-vakuum-konsolenauflagen-leistung-haupt-spindel-18- kw-anz-kontrollierte-achsen-4-achsen-maximale-kantenhoehe-64-mm-a nzahl-bohrspindeln-14-anzahl-werkzeugplaetze-18 Nkedpeyhbiuofx Abvew

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 Njdpfxegwbbqo Abvskw No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: bekas, nomor mesin/kendaraan: 007840, f6f651aa Nsdpfx Abeyg Eg Ijvokw