Mesin transfer putar

IMOberdorf imo-smart

Kondisi: diremaj di bengkel (bekas), Modernized machines with new LTG control system StoreControl L External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Construction depth: 2,980 mm 30 carriers, each with a load capacity of 500 kg Usable (clear) dimensions per carrier: Ndodpfxsn D A Rro Aahsf Width: 1,300 mm Depth: 863 mm Height: from 50 mm to 750 mm Total load capacity up to 40,000 kg Start of access opening at 870 mm above finished floor level, access opening height 845 mm Color scheme: GREY / BLUE, carriers sendzimir-galvanized Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical modifications, and possible deviations from photos. Delivery & installation currently mainly in Germany, Austria, and neighboring countries.

Tahun pembuatan: 2007, Kondisi: bekas, Wheel diameter – max. 400 mm Wheel width – mm Module – max. – Workpiece diameter 36-300/400 mm Center distance 135-290 mm Spindle speeds – infinitely variable 3000 rpm Centre distance 100-550 mm Control system Machine weight approx. 4,000 kg Space requirements approx. 2000 x 3055 x 2788 mm CNC control Siemens 840 D Test procedures: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli-test under double flank contact Features: - Operation with up to 6 test slides - Maximum test accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (Type: Vogel) - Oil mist extraction (Type: Elbaron) Nedpfx Aogr Haroahodf

Kondisi: sangat baik (bekas), Eksekusi spindel ganda dengan poros C, dengan poros Y Kontrol MAZAK Mazatrol Nexus Panjang pembubutan - 538 mm Diameter lintasan - 675 mm Diameter pembubutan 380 mm Kecepatan spindel 35-5.000 + 35-6.000 rpm Majalah alat dengan 16 posisi bertenaga Nsdpoxpugbefx Aahjdf Pemasok batang Perangkat pra-set alat Perangkat penangkap bagian Berbagai aksesori MARCELS MASCHINEN CH

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Ndjdpfx Asuxfucoahef Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or * Ndodpfx Ajia Rtdjahof

Kondisi: baik (bekas), Tahun pembuatan: 2012, CNC Swiss-type automatic lathe Manufacturer: CITIZEN Model: A32 VII CL Year of manufacture: 2012 Equipped with: Mitsubishi Meldas control Ndjdpjwntc Uefx Aahsf Synchronous spindle Driven tools Backworking capability High-pressure coolant pump Oil mist extraction unit Fire extinguishing system Bar feeder: IEMCA BOSS

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, de Nedpfxjwl Uvke Aahjdf

Kondisi: bekas, Tahun pembuatan: 1988, jam operasional: 30.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20992, Sehr geehrte Damen und Herren, wir freuen uns, Ihnen einen IPSEN VTTC-324 aus dem Baujahr 1988 anbieten zu können. Nsdpfx Aswah R Roahodf Technische Daten des Vakuumofens: Nennleistung: 165 kVA Nennspannung: 400 V, 50 Hz Nennstrom: 240 A Nutzbare Ofenmaße: 450 mm x 600 mm x 900 mm Heizleistung: 120 kW Heizspannung: 43 V, 50 Hz Heizstrom: 1.613 A Temperaturbereich: 350 - 1.320 °C Absolutes Vakuum: 1 x 10⁻⁵ mbar (Diffusionspumpe) Absoluter Druck: 5 bar Zum Lieferumfang gehören außerdem zahlreiche Ersatzteile und Ausrüstungen für den Wärmebehandlungsprozess (u.a. Gasbehälter, Heizungen, zahlreiche Steuerungen, Ladegeräte und weiteres Zubehör). Für weitere Informationen stehen wir Ihnen gerne zur Verfügung.

Kondisi: bekas, td-20240615-001 Nsdpfxext U Rho Aahedf

Kondisi: bekas, Swing diameter over bed: 2400 mm Nodpoxddvnofx Aahedf Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.