Pencucian 3 tahap dari baja tahan karat

impianti srl carosello

Kondisi: baru, The perfect coating for long-lasting protection. Pedpoun Sd Ujfx Af Eepu Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is essential for the powder to bond effectively with the substrate and to achieve a robust, long-lasting finish. Components of a Powder Coating System A powder coating plant typically consists of various components and equipment required for the application and curing of powder coatings. Spray Booth and Application Area The booth provides a clean environment for the application process and ensures even distribution of the powder. Powder Coating Gun A powder coating gun is used to apply the powder coating material to the workpiece. Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to convey the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before powder coating application. This includes processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimum adhesion and coating durability. Curing Oven A curing oven is an essential part of a powder coating system. It is used to heat the coated substrate to the proper temperature, allowing the powder coating to melt, flow, and harden into a durable surface. The oven typically features a conveyor system or racks to transport coated parts through the oven chamber. Extraction System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents powder particle accumulation in the air. Looking for a powder coating solution? Are you searching for a tailored powder coating system? We specialize in delivering custom powder coating solutions tailored to your specific requirements. Whether you have particular color specifications, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. Contact us today to discuss your requirements and let us design a bespoke powder coating solution for you. Get in touch with us today!

Kondisi: baru, Tahun pembuatan: 2025, en Podpfjwf Dpgsx Af Espu

Kondisi: baru, Tahun pembuatan: 2024, en-001 Pjdpfeq Tpkyox Af Espu

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, daya laser: 12.000 W, ketebalan lembaran (maks.): 30 mm, Perlengkapan: Penandaan CE, alat penukar nosel, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Unterstützt das Schneiden von 12 m langen Stahlrohren. Ausgestattet mit einem vollautomatischen kombinierten Be- und Entladesystem. Intelligentes One-Stop-System für Be- und Entladen sowie Schneiden, steigert die Produktionseffizienz um 200 %. Unterstützt mehrere Bearbeitungsprozesse wie Fasenschneiden, Verriegeln, Schneiden, Stanzen, Öffnen von Schweißlöchern, Schneiden von Schraubenlöchern, Markieren und Kennzeichnen. Laserleistung: 12.000 W – 20.000 W Verfahrweg X-Achse: 1.600 mm Ppedjw A H T Ajpfx Af Eou Verfahrweg Y-Achse: 1.900 mm Verfahrweg Z-Achse: 900 mm A-Achse Drehung: ±90° C-Achse Drehung: ±90° Verfahrweg U-Achse: 30 mm Verfahrweg V-Achse: 13.000 mm Positioniergenauigkeit: ±0,1 mm Max. Werkstückquerschnitt: 1.000 × 400 mm Max. unterstütztes Gewicht: 5 t Unterstützte Profile: H-Träger, U-Stahl, I-Träger

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components: Spray Booth: Prima Cube 16000 Powder Supply: Powder Center Powder Recovery: Cyclon Filter 16000 Reciprocator: KHG 350 Production Line Configuration INCLUDES: I. Specifications: Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm II. Equipment: 1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min 2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m: - Loading zone length: 2.5 m a. Washing, degreasing, and phosphating; length: 3.6 m • Number of spray frames: 10 • Number of nozzles per frame: 18 • Total nozzles: 180 • Pump capacity: 162 m³/h • Pump power: 15 kW • Process tank: 4 m³ for active solution • Integrated heat exchanger with LPG burner, 160 kW • Operating temperature: 50°C • Mechanical oil separator • Solution filter • Metering system with diaphragm pump and regulator • Washing time: 3 minutes b. Drip-off section, length: 3.1 m • Drip time: 2 min 30 sec c. Primary rinse; length: 1.2 m • Number of spray frames: 4 • Nozzles per frame: 18 • Total nozzles: 64 • Pump flow: 38 m³/h • Pump power: 3 kW • Rinse tank: 1.5 m³ • Rinse time: 1 min c. Drip-off zone, length: 3.1 m • Drip time: 2 min 30 sec d. Final rinse; length: 1.28 m • Number of spray frames: 3 • Nozzles per frame: 18 • Total nozzles: 54 • Pump flow: 33 m³/h • Rinse tank: 1.5 m³ • Pump power: 3 kW • Spare spray frame included • Nozzles per frame: 18 • Final rinse time: 1 min e. Drip-off section, length: 2 m • Drip time: 1 min 40 sec - Three exhaust connections, each with ventilator - Process chamber made of stainless steel Ppjdeww Adtspfx Af Eju - Pipework in PVC or stainless steel (1 unit) 3. Automatic Dryer after Washing AST-1-KLPG: - Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm - Air curtains on each side minimize heat loss - One indirect heat exchanger (LPG), rated at 200 kW - Three circulation blowers, total airflow 6000 m³/h each - Two exhaust duct connections - Temperature sensor and controller - Overtemperature sensor - Airflow monitoring sensor - Chamber in galvanized steel - 200 mm thermal insulation - Drying time: 10 min (1 unit) 4. Automatic Curing Oven APT-2-KLPG for Powder Coating: - Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm - Air curtain on one side to prevent heat loss - Two indirect LPG-fired heat exchangers, each 300 kW - Eight circulation blowers, 6000 m³/h each - Two exhaust duct connections - Temperature sensor and regulator - Overtemperature sensor - Circulation monitoring sensor - Galvanized steel chamber - 200 mm thermal insulation - Curing time: 25 min (1 unit) 5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes: • Straight track with hangers, length: 146 m (hanger spacing 400 mm) • Drive station: 2 units • Tension station: 1 unit • Chain lubrication station: 1 unit • Structural drawings: 1 set

Kondisi: baru, Sheet width: 3100 mm Sheet thickness: 10 mm Cutting angle: 2° Hold-downs: 14 units Strokes: 13 strokes/min Throat depth: 350 mm Oil capacity: 260 l Control unit: CYBELEC CybTouch 8 Total power requirement: 22 kW Machine weight approx.: 10,550 kg Space requirement approx.: 4000x2250x2050 mm Equipment: - Hydraulic swing beam sheet metal guillotine shear Ppedpfxek Tzztj Af Eju - Touchscreen controller with digital display for backgauge - Automatic blade gap adjustment via control system - Backgauge control, 1000 mm travel with ball screw spindles - Swing beam shearing machine with blade gap adjustment - 2 support arms - 1 side gauge - Light barrier behind the machine - Cutting length limitation - Cutting line illumination - Chrome steel blades - Ball transfer rollers in the table - Flip-up finger guard with limit switch - Foot switch - CE mark / Declaration of conformity - Operating manual in German

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force: 80 t Throat depth: 320 mm Pjdpstycdksfx Af Eepu Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table size: 830 x 610 mm Ram surface: 650 x 400 mm Frame opening (rearward): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirements approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - With gear drive - Fixed table - Automatic stroke adjustment - Automatic ram adjustment - Hydraulic overload protection - Ejector - Central grease lubrication - Cover plate for drop-through hole - Infinitely variable speed control via frequency converter - The machine will be technically inspected and overhauled in-house, and will receive a new control cabinet with safety controls and touchscreen - Current accident prevention inspection (UVV) including brake time measurement

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Ppodpofzk Ewefx Af Eju Heating system The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables.

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A complete paint shop system is available. Components: (1) Overhead conveyor, (2) Spray area/brush wall, length: 4000 mm, width: 1500 mm, height: 4800 mm, equipped with Maxon burner, exhaust duct, drawers for dry paint residue disposal, six filter mats, various filters, (3) Flash-off area, (4) Drying cabin, length: 6500 mm, width: 5200 mm, height: 3150 mm, equipped with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000 mm / 10,000 mm, max. power: 45 kW. Documentation is available. Pedpfx Ajup Ehief Ejpu

Kondisi: bekas, Band saw Bomar 450SL. In good condition, documentation included. Available for testing in Kaunas. Pedpfxsqk U Rrj Af Ejpu Specification: Model: Bomar 450SL If you have any further questions, we will be happy to answer them.