Sistem penyelesaian cat

Wagner

2010 powder coating line, excellent condition. Currently in operation, available for inspection and testing.

Maximum part size: L x W x H = 2600 x 400 x 1850 mm

Equipment

Process conveyor

Automatic speed V = 1.2 m/min
Variable speed from 0.5 to 2.5 m/min
Pretreatment station MNA-3-LPG, total length 16.7 m

Entry zone: L = 2.5 m
a. Washing, degreasing, and phosphating: L = 3.6 m

Number of spraying frames – 10
Number of nozzles per frame – 18
Total number of nozzles – 180
Pump capacity – 162 m³/h
Pump power – 15 kW
4 m³ tank for active liquid
Internal heat exchanger with LPG burner – 160 kW
Temperature – 50°C
Mechanical oil separator
Filtration system
Dosing system with diaphragm pump and regulator
Washing time – 3 min
b. Drip-off zone L = 3.1 m

Drip-off time – 2 min 30 sec
c. First rinse L = 1.2 m

Number of spraying frames – 4
Number of nozzles per frame – 18
Total number of nozzles – 64
Pump capacity – 38 m³/h
Pump power – 3 kW
Ncedpfx Aov Ed Ukebvsp
1.5 m³ water tank
Rinsing time – 1 min
d. Drip-off zone L = 3.1 m

Drip-off time – 2 min 30 sec
e. Final rinse L = 1.28 m

Number of spraying frames – 3
Number of nozzles per frame – 18
Total number of nozzles – 54
Pump capacity – 33 m³/h
1.5 m³ water tank
Pump power – 3 kW
Additional spray frame
Rinse time – 1 min
f. Drip-off zone L = 2 m

Drip-off time – 1 min 40 sec
Three extraction system connections with three fans
Working zone made of stainless steel
Pipes made of PVC or stainless steel

1 unit.

Automatic post-wash dryer AST-1-KLPG:

Working area dimensions L x W x H = 7000 x 3000 x 2800 mm
Air curtains on each side to reduce heat loss
Indirect heat exchanger, LPG-fired, 200 kW
Three fans, air supply 6000 m³/h
Two extraction system connections
Temperature sensor and controller
Overheat sensor
Circulation detector
Working zone made of galvanized steel
Thermal insulation 200 mm thick
Drying time – 10 min
1 unit.

Automatic curing oven APT-2-KLPG

Working area dimensions L x W x H = 10200 x 3600 x 2800 mm
Air curtains on one side to reduce heat loss
Two indirect heat exchangers, LPG-fired, 300 kW each
Eight circulation fans, each with a capacity of 6000 m³/h
Two extraction system connections
Temperature sensor and controller
Overheat sensor
Circulation detector
Working zone made of galvanized steel
Thermal insulation 200 mm thick
Curing time – 25 min
1 unit.

Overhead rail conveyor system ATR for paint shop:

Straight rail with hangers L = 400 mm – 146 m
Drive station – 2 units
Tensioning station – 1 unit
Chain lubrication station – 1 unit
Rails supporting structure drawings – 1 set.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.