Sistem pengering kayu yang ringkas dan cerdas

INCOPLAN EASYPLAN

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles Psdpfx Abswka Upjvjgi - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: sangat baik (bekas), VK450 2RE log debarker. Equipped with two rotors. One is a stump grinder rotor. The other is a debarking rotor. Minimum-maximum log diameter: 8-45 cm. Minimum log length: 3 m. Comes complete with original VK centering conveyor. Will be sold after complete overhaul. Pjdpjulv Hzsfx Abvsgi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Hersteller – OMES Pgedowwiv Aspfx Abvoi Leistung – 1400 Paletten/Schicht Baujahr – 2002 Anlage derzeit demontiert

Kondisi: baru, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dua sisi, Line for longitudinal joining with two milling machines. 6000 mm length press. The machine is new and has never been used. All corresponding tools are included with the machine. Pgedpfxowptnme Abvoi

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Kereta blok sortir Holtec tipe SBZ. Panjang 94,5 m. 52 kotak. Pgjdpfx Absw Ug Agjvoi

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7,400 x 4,500 x 4,250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points Equipped with frequency inverter Pjdewr Tzfjpfx Abvogi With control system Heating capacity: 223 kW Water temperature: 85 °C Water volume: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control system: MB Intellevent 5000 program

Kondisi: baru, Tahun pembuatan: 2026, EN001 Pgsdpom Nccxjfx Abvei

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Pgedov Si Szjpfx Abvoi Delivery terms: ex location

Kondisi: baik (bekas), Tahun pembuatan: 2020, de_Maschine Masterwood Project 351 L – 3-Achs CNC-Bearbeitungszentrum Beschreibung - Luftgekühlter 3-Achs-Fräsmotor, 17,5 PS (HSK-63F) - Statischer Frequenzumrichter zur programmierbaren Drehzahleinstellung 1.500–24.000 U/min - Werkzeugwechsler mit 22 Positionen - 6 pneumatische, absenkbare Anschläge für das Beladen/Ausrichten schwerer Werkstücke - Vorbereitung zur Montage von Spannsystemen - 2 horizontale Klemmzangen für Brettschichtholz - 6 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten auf der Rückseite der Auflagen) - 8 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten mittig der Auflagen) - Komplette Referenzierung auf der rechten Seite entlang der Y-Achse - Komplette Referenzierung auf der linken Seite entlang der Y-Achse - 2 Arbeitsfelder - 1 x 100 m³ Vakuumpumpe - 24 Vakuumsauger - Fernbedienung mit Digitalanzeige - Automatisches Werkzeugvermessungssystem - Transportband für Späne/Abfall - Bohraggregat mit 19 Spindeln (32 mm-Achsabstand), 2,2 kW - 7 vertikale Bohrspindeln in X-Richtung - 6 vertikale Bohrspindeln in Y-Richtung - 4 horizontale Bohrspindeln in Y-Richtung - 2 horizontale Bohrspindeln in X-Richtung (Alle Bohrspindeln einzeln programmierbar) - Steuerungseinheit inkl. PC - SINCRO CAD/CAM-Software MASTERWORK Technische Daten Arbeitsbereich X: 5.130 mm Arbeitsbereich Y: 1.550 mm Verfahrgeschwindigkeit X/Y: 80 m/min Verfahrgeschwindigkeit Z: 25 m/min Max. Werkstückhöhe: 200 mm Fräsmotorleistung: 17,5 PS (S1) Drehzahl Fräsmotor: 1.500–24.000 U/min Bohraggregat: 3 PS Werkzeugsystem: HSK63-F Werkzeugplätze: 22 Vakuumpumpe: 100 m³ Absaugstutzen: 250 mm Luftförderleistung: 4.500 m³/h Luftgeschwindigkeit: 30 m/s Druckluft: 7 bar Druckluftverbrauch: 300–500 l/min Pgedpfxjvu U Ite Abvsi Absicherung: 40 A Gewicht: 7.000 kg (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, RANDEK FORGÓ KERESZTVÁGÓ FŰRÉSZ Pedpfx Ajvryhgsbvjgi