Mesin bubut CNC

INDEX C200

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 22.000 W, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling centre, Index G200 C, was manufactured in 2000. Take advantage of the opportunity to acquire this Index G200 C turning and milling centre. Contact us for further information. Additional Equipment • Synchronisation device for sub-spindle machining • Tool carrier 3 for sub-spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning device • Tool changer without gripper (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • With C-axis • No driven tools Machine Advantages Technical Advantages • Footprint (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel with multi-axis configuration • High precision with 0.001 mm resolution in numerical control • Versatile expansion steps and supplementary equipment for enhanced functionality Additional Information Motion Cross Slide 1 (top) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotating): 360° swivel range, angle increment 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross Slide 2 (bottom) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm Turret right: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock centre distance: 400 mm Max. thrust: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Filling capacity: 70 litres Coolant system: Pump output (switchable): 20 l/min @ 18 bar / 50 l/min @ 3 bar / 60 l/min @ 5-7 bar Filling capacity: approx. 230 litres Chip conveyor: Hinged belt or scraper conveyor Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Sub-spindle: D140 external mount (only pull tension allowed for collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (30 mm bore) / 85 mm (42 mm) / 100 mm (60 and 65 mm) Gtsdpfxsyailze Ah Djw Max. speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar diameter (workpiece-Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine depth 3580 mm

Kondisi: sangat baik (bekas), 1 Gjdpfjxuqw Hjx Ah Dotw

Kondisi: bekas, Tahun pembuatan: 2022, INDEX - C200 - 2022 - kondisi sedikit digunakan seperti terlihat pada foto Gjdpfx Ahjyl Nnae Djtw - dalam keadaan terhubung listrik, dapat diuji

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, INDEX C200, Tahun pembuatan: 2021. Kontrol: Siemens Solution Line. 3 turret. 2 spindle. D=90 mm. IRCO VDI 30. Dilengkapi dengan perkakas seperti pada gambar. Pengumpan batang dengan majalah pendek. Mesin berlokasi di Eropa. Gsdpfx Ahox Av Dbj Detw

Kondisi: bekas, drehdurchmesser-260-osp500 Gtodpfjwm Rrdex Ah Dsw

Kondisi: bekas, Tahun pembuatan: 2014, INDEX C200 CNC Lathe 3 Turret 2 Spindle Kontrol Fanuc: 31i-Model B Pemegang Motoris Aksial: 6 pcs Pemegang Motoris Radial: 13 pcs Godpfoxxm Hfox Ah Djtw Pemegang Alat: 11 pcs Pemegang Boring Bar: 21 pcs Pin: 1 pcs Bushing & Sleeves Loader: Ø51/Ø46/Ø41 Bushing loader MBL baru: 2 set 2 skala optik direkondisi oleh HEIDENHAIN 1 Box Lengan Portal soket Balluff dengan berbagai sensor, saklar induksi, dan kabel Belt motoris: 6 pcs Set bushing anti-vibrasi untuk loader MBL Waktu operasi: On time: 37.946 Jam hidraulik: 37.500 Waktu produksi: 26.500 Dengan MBL Bar Feeder

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Swing diameter: 200 mm, Turning length: 400 mm, Max. turning diameter: 420 mm, Bar capacity: 60 mm, Max. chuck diameter: 160 mm, Spindle speed: 5,000 rpm, Turrets: 2, Stations: 2x14, Rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions X/Y/Z: approx. 7,500 mm / 2,100 mm / 2,100 mm, Weight: approx. 4,500 kg. Documentation available. On-site inspection possible. Gtjdpfx Asu T Rgkoh Dow

Kondisi: baru, nl->en Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05° Tube length ----- 1,350 ∞ mm Weight ----- 2,200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0–850°/sec Length feeding ----- Standard 0–2,400 mm/sec Booster ----- 0–1,200 mm/sec Degree of tolerance ----- 0.05°/mm Bending head rotation ----- 0.75 sec Standard components conform to VDMA, ISO, and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with freely programmable robot or loading arm * Weld seam detector and tube positioner (electromagnetic or optical detection) Gedpfx Aega T Exoh Djtw * Free-form radius bending * Simulation/Collision Control * Bed length extension

Kondisi: baik (bekas), Tahun pembuatan: 2003, Untuk data teknis, lihat gambar. Godpfx Ahox R S R Ne Detw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Sumbu ke-4 dan ke-5 terintegrasi Sistem pengukuran langsung untuk sumbu A dan C Instalasi pendingin cairan (coolant) Pendingin spindle Penukar alat 40 posisi Pendinginan internal alat (IKZ) Pemrograman dan pemesinan simultan 5-sumbu Jam operasi mesin: 2163 Gtedpfx Aoyba Dqeh Djw Detail teknis lebih lanjut tersedia atas permintaan.