Mesin bubut menara otomatis

INDEX C29

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. Kjdjyidvdopfx Al Aonb The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: bekas, Putar di atas penopang 400 mm Putar di atas kereta 350 mm Jarak antara centers 610 mm Gerakan panjang maksimum 560 mm Gerakan lintang maksimum 40+120 mm Kecepatan spindle 40-4000 rpm Diameter lubang spindle 52 mm Revolver dengan 12 stasiun Knodpfx Aloxg Nd As Aob Kontrol: Fanuc 6T Dilengkapi dengan: Lihat foto

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, berat benda kerja (maks.): 4.000 kg, jumlah slot dalam magazin alat: 120, produsen pengendali: Heidenhain, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 6.000 mm, berat keseluruhan: 12.000 kg, panjang meja: 630 mm, lebar meja: 500 mm, model controller: iTNC530, daya nominal (semu): 61 kVA, pergerakan cepat sumbu Z: 50 m/menit, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 4.000 kg, jam operasional spindle: 19.500 h, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned machining, geometrically within new machine tolerances. The machine can be measured/inspected on site upon request. Machine Data: Machine designation: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Good Equipment: • Direct path measurement in X/Y/Z (glass scales) • Chip conveyor • High-pressure coolant system, 40 bar Knjdperxrklsfx Al Ajb • Extraction unit • NC rotary table • Tool magazine with 120 stations • Heidenhain touch probe • Rotating viewing window • High-pressure coolant (IKZ) 40 bar • Signal lamp • Chip flushing • Operating mode 4 Technical Data: Number of axes: 5-axis CNC control: Heidenhain iTNC530 NC rotary table clamping surface: 500mm x 630mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travel paths and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rate and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor Spindle: Max. speed: 18,000 rpm Interface: HSK A63 Tool Changer: Automatic tool changer: Yes Number of magazine stations: 120 Pallet Changer: 5 pallets

Kondisi: baik (bekas), Tahun pembuatan: 1995, Shredding via 3 HARDOX spirals Diameter x length: approx. 500 x 1,700 mm Feed opening: approx. 1,100 x 1,700 mm Mounted on steel frame Knodpfx Alsl I Dx Ne Ajb New feed hopper 8 m³ New control cabinet Includes 7 unused spare augers

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard Knsdolz Rvlopfx Al Asb X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Kedpfx Aleiay Sfs Ajnb Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles max. nominal bore D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including bar loader IEMCA PRA40/37/F, year 1987 (bundle magazine) Painted in light blue and light grey Tool configuration may differ from images. Please contact us for further information and pictures via mail(at) or

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW Ksdpfx Aljyw H Szo Ajnb WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: baik (bekas), Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Kjdoyb R Erspfx Al Aonb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jumlah sumbu: 3, Mesin 3-sumbu tipe DMG MORI CMX 600 V ini diproduksi pada tahun 2016 dan telah dilengkapi dengan persiapan untuk meja putar sumbu ke-4, kontrol Siemens 840D, serta spindle SK40. Mesin ini dilengkapi dengan sistem pengukuran canggih baik untuk benda kerja maupun alat, yang menjamin presisi tertinggi. Sangat ideal bagi siapa pun yang ingin memperluas kapasitas pemesinan mereka dengan mesin yang andal. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Mesin utama dengan opsi untuk penggerak utama • Persiapan untuk meja putar (sumbu ke-4), EA 510L (meja putar tidak termasuk dalam paket) • Sistem pengukuran keamanan untuk sumbu X/Y/Z • Lampu sinyal, 4 warna, standar • PROGRESSLine & Planolight • Bahasa tampilan: Hungaria • Teks layar: Jerman/Hungaria • Dokumentasi: Doc 1 & Doc 2 (HU); skema listrik (DE) • Lain-lain: Persiapan penyerahan mesin; unit konversi internal ID 34; pemeriksaan dan persiapan tercatat Perlengkapan tambahan • Konveyor serbuk dengan ICS (aliran pendingin internal) + tangki serbuk (paket produksi 1) • Sistem pengukuran benda kerja TS 649 (di atas meja) • Sistem pengukuran alat TT140 • Pencahayaan di majalah alat • Pemuatan alat melalui pintu majalah • Platform/basis mesin berlapis film Knsdpfex D Di Uex Al Ajb • Layanan jarak jauh NetService (ID 2632226)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Meja pengindeks 400 mm manual Set perkakas termasuk Lubang meja: 10 - 130 mm Lebar alur pasak: 2 - 32 mm Kecepatan umpan: 0,5 - 5 m/menit; Diameter meja Ø: 690 x 460 mm Kapasitas beban meja: 2000 kg Jarak gerak ram: 0 - 425 mm Panjang: 1300 mm Lebar: 1100 mm Tinggi: 1400 mm Knodjxclfzopfx Al Aeb Berat: 1800 kg