Pusat pembubutan dan penggilingan CNC

INDEX G 250

Kondisi: baik (bekas), Spindle diameter: 80 mm Spindle mount: SK50 Spindle speeds: 11 - 1000 rpm Ppjdophl Ecspfx Al Isr X-axis travel: 1700 mm Y-axis travel: 1800 mm Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Machine weight: 10 tons

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.800 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL2561708843, jumlah spindel: 2, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool magazines Tool positions: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5/4.9/4.2 (3 min / 5 min / cont) Rapid traverse (m/min): 30 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/18.5/15 (25% DC / 50% DC / cont) Max. torque (Nm): 49 Counter spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11/7.5 (25% DC / cont) Max. torque (Nm): 22 Counter spindle travel (mm): 734 Cooling system Tank capacity (liters): 366 Equipment Chip conveyor Signal beacon Machine operating time: Power-on hours: 19,393 Cutting time: 8,800 Nominal power rating (kVA): 48 Psdpfx Asyzxcgol Iepr Base machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Illustrated tools, driven tools, and both chucks are not included in the scope of delivery.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Turning and Milling Center – DMG GILDEMEISTER – CTX gamma 1250 TC Year of manufacture: 2009, used as a demonstration machine until 2011, in production since 2012 Pjdpsw Hg Nlefx Al Iopr The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately ready for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B-axis. Basic machine data: * Partial hollow clamping device (hydraulic) * C-axis * Upper compound slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, taper: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct linear measuring systems on X, Y, and Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar capacity: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turning-milling spindle: * Tool taper: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine footprint approx. (W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight approx.: 18.5 t EQUIPMENT: Well equipped … * No steady rest * Complete documentation available No guarantee as to the completeness or accuracy of the technical data or equipment. Detailed technical specification sheet and equipment information available on request.

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15” color display, keyboard CNC-Turbo roughness software for WINDOWS TECHNICAL DATA Granite inspection plate (DIN 876) Length x width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed device Waveline 60 Basic Measuring range: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel: 400 mm Positioning repeatability: < 10 µm Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT / ACCESSORIES  Full enclosure with electrically operated roller shutters  Granite plate 1200 x 500 mm Pedpfx Ajlxyp Hel Iopr  ISEL feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual for Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurements  Machine table  Emergency stop button at the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the granite plate  Documentation

Kondisi: bekas, Tahun pembuatan: 1999, X-axis travel 600 mm y-axis travel 525 mm z-axis travel 500 mm Table clamping surface 1000 x 543 mm Spindle taper SK 40 Spindle mount DIN 69871 Spindle speeds - stepless 20 - 12,000 rpm Feed rates X/Y/Z axis 20 - 10,000 mm/min Rapid traverse X/Y/Z axis 18 / 18 / 15 m/min Table load capacity max. 350 kg Control HEIDENHAIN MillPlus Pjdetqqmhopfx Al Iopr Head swiveling +/- 90° Total power requirement 26 kVA Machine weight approx. 4.2 t Machine dimensions L x W x H 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Diameter pembubutan 376 mm, panjang pembubutan 760 mm, kapasitas batang 76 mm, sumbu Y -/+ 52,5 mm, sumbu C 0,001° pada kedua spindle, turret 12 posisi, motor 22 kW, spindle utama 4000 rpm, sub spindle 4500 rpm, chuck rahang 3, konveyor serbuk, pengukur alat. Ppodpfx Ajyll Txel Ior

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for brass parts! CNC turning and milling center | EMCO HYPERTURN 665 MC Plus with main and sub-spindle, C and Y axes, 2x turrets with 12 driven tool stations each! Technical specifications: Swing diameter over bed: 600 mm Swing diameter over cross-slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm X-axis travel: 270 mm Z-axis travel: 750 mm X2-axis travel: 205 mm Ppedpfx Aloxzq Ncj Ior Z2-axis travel: 750 mm Y-axis travel: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Turrets: 2x 12 stations, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with parts ejector Turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tool cabinet with driven and static tool holders, carbide inserts, and toolholders Collet chucks for main and sub-spindle Complete documentation etc. Machine available immediately! Machine ready for operation! We will load the machine! Transport can be organized upon request!

Kondisi: bekas, Tahun pembuatan: 2003, de-hu-001 Pedpfx Aloxiy Aue Ijpr

Kondisi: baik (bekas), Tahun pembuatan: 2014, tinggi pusat: 180 mm, lebar di tengah: 600 mm, diameter penggilingan: 260 mm,

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel path Z: 150 mm Ppsdpeuha Umefx Al Ier - Travel path X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel path X/Y: 97/133 mm SUBSEQUENT MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 6 kW DIMENSIONS AND WEIGHT - Required space: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control system: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320