Pusat pembubutan dan penggilingan

INDEX G 300

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500522, kecepatan spindel (maks.): 3.500 rpm, berat keseluruhan: 6.500 kg, diameter spindel: 140 mm, kecepatan spindle sekunder (maksimal): 3.500 rpm, DETAIL TEKNIS Spindel Utama Lubang spindel dengan penjepit collet: 90 mm Diameter spindel pada bearing depan: 140 mm Hidung spindel ISO 702/1 (ukuran): 8 Diameter chuck: 250/315 mm Diameter nominal putar maksimum: 270 mm Diameter putaran maksimum: 590 mm Kecepatan putar: maks. 3.500 rpm Spindel Lawan Lubang spindel dengan penjepit collet: 90 mm Diameter spindel pada bearing depan: 140 mm Hidung spindel ISO 702/1 (ukuran): 8 Diameter chuck: 250/315 mm Kecepatan putar: maks. 3.500 rpm Jarak minimal collet: 20 mm Gerak cepat: 22,5 m/menit Pemegang alat Jumlah alat: 12 DETAIL MESIN Dimensi & Berat Luas lantai: ca. 8/10,5 m² Tinggi: 2.150 mm Berat mesin ca.: 6,5 t PERLENGKAPAN Tailstock Sistem pemuatan dan pembongkaran otomatis Kedpfsxvq Rpjx Aayjdw

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), de Kedpfxjxqtcds Aayodw

Kondisi: bekas, Tahun pembuatan: 2000, diameter pembubutan: 250 mm, produsen pengendali: INDEX, model controller: C200-4, jumlah spindel: 2, CONTROL - CNC control: INDEX C200-4 FUNCTIONALITY - Design: slant bed - Number of spindles: 2 - Number of cross slides: 2 - Number of turrets: 2 - Driven tools: yes - Number of C-axes: 2 - Number of Y-axes: 1 WORKING AREA – TURNING - Max. turning diameter: 250 mm - Max. workpiece length: 1250 mm MAIN SPINDLE - Drive power S6 40%: 43 kW - Drive power S1 100%: 57 kW - Spindle bore: 90 mm - C-axis: yes SUB SPINDLE - Drive power S6 40%: 28 kW - Drive power S1 100%: 40 kW - Spindle torque S6 40%: 178 Nm - Spindle torque S1 100%: 255 Nm - C-axis: yes - Spindle bore: 90 mm CROSS SLIDE 1 - Z-axis travel: 1250 mm - X-axis travel: 215 mm - Y-axis travel: 180 mm - Total number of tool positions: 12 CROSS SLIDE 2 - Z-axis travel: 1250 mm - X-axis travel: 140 mm - Tool holder: turret - Total number of tool positions: 12 DIMENSIONS / WEIGHTS - Space requirement (left/right): 5300 mm - Overall height: 2150 mm ELECTRICAL CONNECTION DATA Kdjdpfxsxp Uu Ej Aaysw - Connected voltage: 400 V - Mains frequency: 50 Hz Equipment: - 2 jaw chucks Note: Z-axis needs to be repaired and geometry to be aligned.

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500322, panjang pembubutan: 1.250 mm, daya motor spindle: 43 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 215 mm, jarak lintasan sumbu Y: 180 mm, jarak gerak sumbu Z: 1.250 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 7 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan rotasi (maks.): 6.000 rpm, Mesin tipe multitasking. Spindel ASA6 + kontraspindel ASA6, daya 19/28/43 kW. Turret untuk milling & turning – 2 stasiun tetap untuk turning – 2 stasiun motorized untuk milling – interface HSK B63, daya 15 kW. 2 rentang kecepatan 1500/6000. Turret bawah untuk turning. Mesin dengan CNC Siemens 840C. Mesin dengan CNC + PLC + alarm dalam bahasa Jerman. Kdodpjxc Eu Aofx Aayow

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500358, panjang pembubutan: 1.250 mm, diameter pembubutan: 300 mm, daya motor spindle: 43 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, INDEX G300L with Promot gantry loader. The machine is still in production and powered on. The Promot loader features 2 rotary transfer conveyors, each with approximately 30 pallet positions. The machine is equipped with high-pressure coolant system (40 bar), paper band filter, and tool changer. Further information available on request via email. Kdedpfx Asu Nmq Hoaysw

Kondisi: bekas, Tahun pembuatan: 1995, Here is the English technical translation optimized for platforms like Machineseeker and TruckScout24: INDEX (Germany) CNC Slant-Bed Lathe with Turret, Tailstock, and INDEX CNC Control C 200-4 (SIEMENS) Model: G 300 Year: 1995 S/N: 5000 65 Technical Data: - Max. Turning Diameter (with chuck): 300 mm - Spindle Bore: approx. 90 mm - Max. Workpiece Swing Diameter: approx. 400 (max. 590) mm - Max. Turning Length / Centre Distance: approx. 710 mm - Turret Slide Travel (Z axis / longitudinal): 710 mm Kdedpfet Hw Susx Aayew - Turret Slide Travel (X axis / cross): 140 mm - Rapid Traverse Speed Tool Carrier: 20 m/min - Turret with 12 tool positions for DIN 30 tool holders (approx. 40 different holders included as accessories) - Feed Force X/Z Axis: 8/13 kN - Stepless Spindle Speeds: up to 5,000 rpm - Max. Spindle Torque at 100% ED: 275 Nm - Spindle/Tool Drive Power: approx. 28 kW - Total Power Requirement: approx. 40 kW, 400 V, 50 Hz - Machine Weight: approx. 6,000 kg Accessories / Special Features: • SIEMENS CNC 3-Axis Path Control Type SINUMERIC 840 C or INDEX C 200-4 for the following axes: Turret 1 = X/Z as well as C-axis (spindle orientation). The control panel is mounted left and can be swiveled. • Alignment and indexing device for the main spindle • Forkhardt KFD-HS 250 hydraulic 3-jaw chuck fitted, with numerous jaws, max. speed 5,000 rpm • INDEX turret with 12 tool positions for DIN 30 tooling; approx. 40 additional tool holders included as accessories. Turret stations are prepared for driven tools, drive via the indexing device motor. • Hydraulic tailstock with eccentricity correction, quill 60 mm, operable via footswitch • KNOLL mobile chip conveyor with coolant facility and high-pressure pump • Front sliding door, otherwise complete enclosure. Oil skimmer This machine is ideal for shaft machining as well as for chuck workpieces. Very robust construction! (Please let me know if you need adaptations for other platform requirements or an export summary.)

Kondisi: bekas, Tahun pembuatan: 2009, e678c8a9 Ksdpfx Aasw Dud Esyodw

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.250 mm, diameter spindel: 90 mm, jumlah slot dalam magazin alat: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cables and hoses for drag chains of Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle bore HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: Taper No. 8 Kodpfxsvitzne Aayodw C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / driven: 12 / 6 Coolant system Type: Knoll unit with paper band filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chucks - Numerous turning and drilling holders with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous static holders CDI-Capto C4 radial and axial

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500641, panjang pembubutan: 710 mm, diameter pembubutan: 300 mm, jarak pergerakan sumbu X: 215 mm, jarak lintasan sumbu Y: 180 mm, jarak gerak sumbu Z: 710 mm, tinggi total: 2.150 mm, panjang total: 2.150 mm, lebar total: 3.160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore for collet clamping: 65 mm Spindle Ø at front bearing: 110 mm Max. speed n: 5,000 rpm Spindle nose ISO 702/1 size: 6 Chuck diameter: 250 mm Max. torque Md 100%: 275 Nm Kdodpfxewxw Upo Aayew Max. power P 100%: 43 kW Tailstock electrically traversable Centre distance (710): 740 mm Max. clamping force (electric): 10,000 N Cross Slide 1 XYZ (upper) X-axis travel: 215 mm Y-axis travel: 180 mm Z-axis travel: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse speed X-axis: 20 m/min Rapid traverse speed Y-axis: 7.5 m/min Rapid traverse speed Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Carrier Number of tools: 12 Tool system DIN 69 880: Ø30 mm MACHINE DETAILS Dimensions and Weights Height: 2,155 mm Base area (710): 4,140 mm x 2,155 mm Installation area (710) without material guide: 4,140 mm x 3,570 mm Weight (710): approx. 6,500–7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main fuse in supply line: 35 to 125 A EQUIPMENT Milling spindle set 6-position tool changer HKS-50B KM40 Material unloading device Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height 1,250 mm Coolant fine filtration hydrostatic paper band filter Vacuum rotation filter W-UAT-106A MMS system LUBRIX 750