Pusat pembubutan dan penggilingan CNC

Index G 400

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2002, Fungsionalitas: tidak berfungsi, jenis arus masuk: tiga fasa, berat keseluruhan: 17.000 kg, Kami menawarkan mesin bubut CNC INDEX G400 yang cacat ini, tahun pembuatan 2002. Godpfxox S Ir Ee Adtebg Tipe mesin: G400 Nomor mesin: 650036 Tahun pembuatan: 2002 Tegangan/frekuensi suplai: 3 Fasa / 50 Hz Tegangan suplai: 400 V Tegangan kontrol: 24 V Arus nominal: 204 A Daya nominal: 120 kW Berat rangka: 700 kg Berat mesin: 17000 kg Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Gsdoxddvnopfx Adtsbg Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 4 Kecepatan spindle: 3000 RPM Daya motor spindle: 67 kW Pergerakan Pergerakan Sumbu X: 640 mm Pergerakan Sumbu Z: 2000 mm Pergerakan Sumbu Y: 210 mm B-Axis Maks: 360º Pergerakan Sumbu C: 360º Peralatan Berat maksimum: 5 kg Mesin bubut horizontal 4-sumbu Index G 400 ini diproduksi pada tahun 2008. Mesin ini memiliki diameter pembubutan maksimum 630 mm, kapasitas panjang 2000 mm, dan mampu menopang berat benda kerja hingga 300 kg. Dilengkapi spindle milling kecepatan tinggi 6000 rpm serta kecepatan spindle utama 3000 rpm, mesin ini menawarkan kapabilitas pemesinan yang sangat kuat. Jangan lewatkan kesempatan untuk membeli mesin bubut horizontal Index G 400 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Gbjdpfox D D Ecsx Adtsg Pembubutan

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 53 / 68 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - 1 - Free length: 2000 [mm] - Max. main spindle chuck diameter: 420 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Spindle drive power: 50 / 70.5 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [deg] LEFT UPPER TURRET HEAD - Number of positions: 12 - Number of driven positions: 12 - Tool holder: VDI 40 - Travel X/Z: 320 x 2,000 [mm] - Travel Y: 210 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 17 [kW] RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - Tool holder: VDI 40 - Travel X/Z: 210 x 2,000 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 11.3 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 137 [kW] Gbsdouhbpfspfx Adtog WEIGHT AND DIMENSIONS - Floor space required: 9,000 x 3,500 [mm] - Machine height: 3,000 [mm] - Machine weight: 21,000 [kg] MACHINE HOURS - Operating hours: 34274 [hrs.] EQUIPMENT - Control: INDEX C200-4D (Siemens 840D) - Coolant tank: KNOLL * with high-pressure pump: 80 [bar] * with paper filter - Automatic doors - Chip conveyor: Right

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, CNC twin-spindle turning center Control system: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter to tool turret 2: 540 mm Travel distances: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter spindle slide: 180 mm Z3 – Counter spindle slide: 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0–4000 rpm Bar capacity: 102 mm Drawtube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0–5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES  Short bar loader IRCO ILS-RBK 100/16  Various main spindle reduction sleeves  NC-controlled workpiece pick-off device for main and counter spindle The unit consists of an NC-controlled: * Horizontal axis * Swivel unit * Vertical axis * 2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removal of workpieces from the machine  Coolant system 8/20 bar with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°C)  Counter spindle slide  Easy-Tool Monitor Godpfxswcd S Nj Adtsbg  1 collet chuck for quick-change chuck, size 100, for main spindle  1 collet chuck for quick-change chuck, size 100, Nova AxisFix for counter spindle  Approx. 40 various quick-change chuck heads, size 100 (entire stock)  Pneumatic changeover device, ø 100 mm  Approx. 50 various tool holders, static and driven (entire stock)  Mounting elements  Documentation

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle Gsdpfxet U R Hze Adtebg - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: baik (bekas), BYSTRONIC HYDRAULIC PRESS BRAKE 3100x150 TON, MAX STROKE 315 mm, FAST DOWNWARD STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST UPWARD STROKE 150 mm/s, DIMENSIONS: 415x200x290 cm (h), WEIGHT: 11,000 KG Y1 Y2: hydraulic ram axes. X axis: backgauge forward and backward movement. R axis: backgauge up and down movement. Z1 and Z2: axes for right and left positioning of gauge fingers. X1 or relative X: axis for forward and backward movement of a single gauge finger. 7 axes in total. The control also manages hydraulic crowning, which can be considered the eighth axis. Gbedpfx Aevxipgjdtsg

Kondisi: sangat baik (bekas), Control: D.Electron Z 32 Center height: 220 mm Distance between centers: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6" Spindle bore: 62 mm Spindle speeds: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill travel (manual): 200 mm Godpfx Asd Sitkodtobg Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Tahun pembuatan: 1990, Kondisi: baik (bekas), nomor mesin/kendaraan: 92041, Table clamping surface: 410 x 900 mm Travel (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required floor space: 2,600 x 2,000 x 2,300 mm Gbodpfsdhhprjx Adtsg Weight: 3,500 kg

Kondisi: bekas, Tahun pembuatan: 2007, de-hu-01 Gjdpfxsvyli Eo Adtobg