Pusat pembubutan dan milling CNC

INDEX G200

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Mesin dalam kondisi sangat baik. Mesin telah beroperasi hingga akhir dan sekarang berada di gudang, tidak terhubung ke listrik. Mesin 100% lengkap. Tersedia konveyor suku cadang, konveyor serbuk logam. Hedpfswq Rwnox Abvjff Diameter lubang spindle 42 mm 2x chuck 3 rahang 160 mm 2x chuck collet Hainbuch 42 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 450 mm, kecepatan spindel (min.): 25 rpm, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 213 mm, jarak gerak sumbu Z: 450 mm, gerak cepat sumbu X: 24 m/menit, pergerakan cepat sumbu Z: 30 m/menit, saluran batang: 65 mm, 1 Hjdow Adhwspfx Abvsff

Kondisi: bekas, Tahun pembuatan: 1997, clqoidtuo00023b6sdtn40rma Hfodpfeylp Awox Abvjf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 92.000 h, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It offers a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret featuring 12 stations and driven tools on both turret 1 and 2. If you are looking for top-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we have for sale. Contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in the CAM programming system • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Sub-spindle coolant flushing (electrically actuated shut-off valve) • Foot switch • Turret (12 stations) upper and lower • Driven tools on turret 1 and 2 • Control function "Synchronous tailstock" for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant supply on slides 1 and 2 with solenoid valve • Coolant washdown gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment Hedpfx Abeylw Dcjvoff • Gantry unloading device with actuated gripper, NC-controlled • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion application) • High pressure pump 80 bar • Workpiece clamping: • Collet chuck for pull rod, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large selection of driven tool holders and spare parts inventory

Kondisi: bekas, Tahun pembuatan: 1977, Surface grinding machine, manufacturer: Okamoto, model: PSG-63UA, year of manufacture: 1977 Magnetic chuck: 600 mm x 300 mm. Hodpsiz Tmksfx Abveff Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Ready for operation.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 22.000 W, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling centre, Index G200 C, was manufactured in 2000. Take advantage of the opportunity to acquire this Index G200 C turning and milling centre. Contact us for further information. Additional Equipment • Synchronisation device for sub-spindle machining • Tool carrier 3 for sub-spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning device • Tool changer without gripper (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • With C-axis • No driven tools Hodpfxeyailzo Abvjff Machine Advantages Technical Advantages • Footprint (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel with multi-axis configuration • High precision with 0.001 mm resolution in numerical control • Versatile expansion steps and supplementary equipment for enhanced functionality Additional Information Motion Cross Slide 1 (top) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotating): 360° swivel range, angle increment 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross Slide 2 (bottom) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm Turret right: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock centre distance: 400 mm Max. thrust: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Filling capacity: 70 litres Coolant system: Pump output (switchable): 20 l/min @ 18 bar / 50 l/min @ 3 bar / 60 l/min @ 5-7 bar Filling capacity: approx. 230 litres Chip conveyor: Hinged belt or scraper conveyor Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Sub-spindle: D140 external mount (only pull tension allowed for collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (30 mm bore) / 85 mm (42 mm) / 100 mm (60 and 65 mm) Max. speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar diameter (workpiece-Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine depth 3580 mm

Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm Turning length: 400 mm Control: Siemens Type: C 200-4 840 C Spindle bore: 65 mm Tool changer: 2 x 14 positions Driven tools: 2 x turret Hfsdpfxeyqvygs Abvjf Machine weight: approx. 4 t Main and sub spindle 3-jaw chuck with multiple jaws Hainbuch collet chucks Numerous tool holders Various driven tools Bar feeder "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc., see photo The technical data are as provided by the manufacturer/operator and are therefore not binding for us. We reserve the right to prior sale; only our terms and conditions of business and sale apply. About us: - Over 400 of our own machines in stock - More than 15,000 m² storage space, crane capacity 70 t - Over 10,000 accessory items for your workshop If you wish to sell machines, production lines, or your business, please contact us. You will find further offers on our website. Viewings are possible by prior arrangement. We look forward to your visit. Your Markus Hirsch Team

Kondisi: bekas, Tahun pembuatan: 2007, Turning diameter: 140 mm Turning length: 615 mm Control: C200-4D Spindle bore: 65 mm Spindle speed: 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides: 1, 2, and 3 Hedpswzynqofx Abvsff X-axis travel: 110 mm Z-axis travel: 360 mm Y-axis travel: 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction: 150 mm Slide travel Z-direction: 600 mm Spindle speed: 5,000 rpm B-axis (correction axis): +/- 1° Tool turret - number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis: 0.001° Total power requirement: 61 kW Machine weight approx.: 6.5 t Space requirement approx.: 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with lengths from 500 to 3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading device BREUNING ILS-REX-7208, year 2007

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Kontrol: SIEMENS Lubang spindel: 65 mm Panjang pembubutan: 660 mm Maks. putaran: 6.000 rpm Spindel lawan Z= 700 mm Hedpjyi Uk Isfx Abvjff PEMEGANG ALAT 1 dengan spindle milling Spindle milling: 7.200 rpm Sumbu-B 360° 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 230 / Y= ±65 / Z= 845 PEMEGANG ALAT 2 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 140 / Y= ±45 / Z= 810 Konveyor serbuk (chip conveyor) Filter Bar feeder INDEX MBL

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), d0d942de Hsdpfx Abeym Dgmevoff

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool stations: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control system: Heidenhain TNC 426. An on-site inspection is possible. Hfodpfxjv Uqb Ns Abvsf

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Maximum speed range: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14 stations, Siemens control. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar feeder. Completely overhauled in 2016. Hedpfx Ajtdwwmebvjff

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Maximum turning diameter: 200 mm, maximum turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Hsdpetdwwqjfx Abvjff

Kondisi: bekas, Tahun pembuatan: 2005, Mesin Gerinda Roda Gigi Reishauer RZ150 Hsdpfx Aexz E Srjbvoff

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de_hu_1 Hedpfx Absyfv Nksvoff