Mesin Indramat

Indramat MAC071C-0-GS-4-C / 095-A-0 / WI520LV Permanent Magnet Motor SN: 76449

Kondisi: bekas, Tahun pembuatan: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height (measured in bed): 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 – 2240 rpm, 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev, 32 steps Cross feeds: 0.02 – 0.71 mm/rev, 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Bodpov A Sqhjfx Abkslr Machine dimensions (LxWxH): approx. 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation), available free of charge in Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with internal/external jaws, rated for 2000 rpm Thread cutting: metric, module, imperial threads Chip guard Chuck guard (mechanical) MULTIFIX tool post with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection device Machine feet UVV safety preparation complete

Kondisi: baru, Neues Gerät, hergestellt in Dänemark. Hebedauer: 18 Sekunden. Be- und Entladen mittels Palettenhubwagen. Die Lasten werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbedienung für Heben/Senken mit Not-Aus-Funktion. Leistungsaufnahme: 0,75 kW. Tragfähigkeit: 1000 kg. Spannung: 3 x 400 V. Minimale Hubhöhe: 80 mm. Maximale Hubhöhe: 780 mm. Außenmaße: 1420 x 1140 mm. Innenfreiraum: 585 mm. Hub- / Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg. Bledpfed Hp Efox Abkor

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: Bljdpfx Asmhhf Sebksr - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: baik (bekas), NHH lathe Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Bodpemw Ukcsfx Abkolr Turning length: 600 mm Heidenhain digital readout Chuck diameter: 155 mm Spindle speed: 2,000 rpm Dimensions: 150x85x155 cm (LxWxH)

Kondisi: baru, Suction capacity at nozzle (filter unit)*: 2,600 m³/h (free-blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Bedpfepkwausx Abkslr Noise level*: 66 dB(A) Dimensions L/W/H in mm: L 1160 / W 508 / H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltages and colours available on request OPTIONAL: With pre-filter package Use case: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC optionally available (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow rate - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air flow capacities - Can be adapted to pollutant load and required air flow - Wide range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series specifically for use in metalworking applications with pure oil and for the separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters of the ELBARON® series have counted among the highest-performance filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. The ELBARON® series comprises 18 device variants and can be optimally configured to your requirements in terms of size and performance. ELBARON® units are distinguished by long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure maximum filter efficiency, service life, and trouble-free operation with optimal economic efficiency.

Kondisi: baru, Tahun pembuatan: 2025, The industrial CORMAK 410 x 1500 metal lathe features a robust cast iron bed construction. It is equipped with a 16-speed gearbox driven by a two-range induction motor (2.2/3.3 kW), delivering maximum torque. This model is recommended for turning hard steel and for mechanical turning operations. It supports multiple tasks such as internal and external surface turning, taper turning, polishing, metric and imperial threading, as well as drilling and broaching. - The CORMAK 410x1500 universal lathe is suitable for a wide range of applications, including internal and external turning, taper cutting, polishing, metric, imperial, module, and DP threading, drilling, and broaching. - The solid cast iron bed design ensures maximum vibration reduction. Additionally, the bed is hardened and precisely ground. - The digital readout operates on three axes: longitudinal, cross, and compound slide. The processed electronic signals from the optical scales display the axis movements digitally on the screen. - The lathe is equipped with a high-quality, reinforced spindle bearing system. - Optimal performance is ensured by the large spindle bore of 52 mm. - The spindle gearbox is fitted with hardened and ground gears. - A bed width of 250 mm provides stable and precise working conditions. - It comes with both a leadscrew and a feed rod for threading, as well as automatic longitudinal and cross feed. - Easy spindle speed and automatic feed adjustment are provided via an ergonomic control panel located on the gearbox. - A wide range of threads can be cut without the need to change gear wheels. Extensive threading capabilities: metric (42) 0.2–14 mm/rev, imperial (42) 2–72 TPI, module (18) 0.3–3.5 mm, and DP threads (21) 8–44 DP. Both right- and left-handed threading is supported. - The thread chasing dial is designed for accurate thread lead counting. This feature saves time by allowing the carriage nut to be disengaged during multiple passes, enabling rapid manual return of the carriage to its starting position. - The bed features a removable bridge for machining oversized workpieces, such as large discs. With the bridge removed, this lathe allows a maximum machining diameter of 580 mm. Blsdpjrh E Smjfx Abkjr

Kondisi: bekas, Thread cutting machine, pipe threader - Without tool - Operating voltage: 220 V Bljdsfyh Ebjpfx Abkor - Dimensions: 830 x 530 x H1080 mm - Weight: 64 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical Data: Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm Motor power: 1.7 kW Spindle speed adjustable via potentiometer: approx. 100 – 2,300 rpm 3 preselectable speeds or 3 gear stages Bledpfx Abjxvtinekor Scope of delivery, machine equipped with: Operating modes: Manual and Automatic Pneumatic clamping device Tip-over tailstock with 2 barrels for collets K 12, with selector switch Hand lever cross slide with 4 stops, consisting of cross and longitudinal slides