Rak kantilever

Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: Iiodpfx Afjmhh Dtsija - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. paint intermediate sanding configuration Special price for display machine – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Constant working height due to upper part adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller based on a sanding grit scale Iiedpfx Afok Dpp Ssisa - Electric raising/lowering of the contact roller according to unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Belt tensioning, control and oscillation pneumatic Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with immediate feed stop and automatic lift-up - Infinitely variable chip removal - Electronic feed control on the control panel, stepless from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automatic quick setup and feed activation - eco power-saving mode - Error diagnostics - Pass-through height up to 210 mm (up to 18.5 kW) - Sanding belt size: 1350 x 2000 mm Perfect - Equipment: High-quality swivel-mounted plexiglass control panel - 10" touch screen - Industrial control - Automatic pressure control and memory of sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counter Lacquer Equipment: - Infinitely adjustable sanding belt speed on 2nd unit - Jet nozzles for sanding belt cleaning on 2nd unit, usage-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-jet cleaning with fan Location: 54634 Bitburg - available immediately -

Kondisi: baru, Tahun pembuatan: 2026, Technical Data: • Extraction capacity ~ 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction connection 250/200mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1,982 x 2,144 mm • Weight 300 kg • Filter category G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Iiedpfx Ajd H Rf Tjfioa Scope of delivery: • Complies with H-2 standard • Polyester filters, 5 microns • 2 containers • Chassis • Filter cleaning via vibratory system with control panel + €850 for models with fire extinguisher (Safe System)

Kondisi: baru, de_Bester Preis 4499 EUR (EXW Jonava, Litauen) Iijdpfednxydsx Afioa Abmessung des Schiebetisches: 2200 x 375 mm Max. Schnittkapazität: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsäge: 4500/6000 U/min Durchmesser der Hauptspindel: 30 mm Sägeblatt schwenkbar: 0-45° Elektrisch gesteuerte Sägeblatthebung/-senkung Hauptmotor: 5,5 kW Vorritzsägeblatt-Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7000-8000 U/min Vorritzsägendurchmesser (Achse): 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung des 400-mm-Sägeblatts muss das kleinere entfernt werden. Ein reduziertes Sägeblatt darf nur mit einer maximalen Hauptschutzabdeckung von 350 mm verwendet werden.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 25.05.004, panjang total: 9.500 mm, lebar total: 2.250 mm, tinggi total: 2.300 mm, tegangan masuk: 380 V, daya: 50 kW (67,98 hp), berat keseluruhan: 21.000 kg, berat kosong: 18.000 kg, sambungan udara terkompresi: 7 batang, Perlengkapan: dokumentasi / manual, EN-Paper size: 730 x 1060 mm; maximum printing area: 710 x 1040 mm. Paper thickness: 0.05 mm – 0.5 mm. The current maximum speed (set to simulate the time for sheet removal on high-speed presses) is 4,000 sheets per hour, but the machine can run significantly faster for commercial work. Four-fold central impression cylinder, which processes all four printing units in one gripper cycle. 1988 FAG Speedproof with a control console for ink fountains and cylinder adjustment for extremely precise register printing. Attached is the original factory brochure. The machine has been completely dry-ice cleaned and the cylinders are in excellent condition. The machine is offered strictly as-is. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. The price is absolutely non-negotiable and is based on removal of parts that could otherwise be sold separately, such as the Mabeg feeder with vacuum belt, and the four-unit Baldwin stainless steel recirculator, each color with its own tank, mixer, and individual temperature control—so all four tanks can be set to different temperatures and alcohol contents. The machine has been dry-ice cleaned, and the original intention was for it to be used in electronic paper printing, but the project was abandoned due to excessive startup losses. We have had the machine for three years and, due to its size, I want to sell it as quickly as possible. That is why it is offered at this very low price. It is an excellent machine. If the machine needs to be set up for testing and trial runs, this can be arranged at an extra cost of €10,000, of which €5,000 must be paid in advance as a deposit under certain conditions. All relevant information can be found in the original FAG brochure, available in PDF format through this advertisement. Technical Data • Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) • Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) • Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) • Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) • Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) • Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) Iodjuf Sy Ajpfx Afioia • Speed max.: 4,000 sheets/h • Floor space required (including access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) • Press height: 230 cm (90.55 in.) • Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) • Total power requirement: approx. 50 kW • Compressed air supply: 6 – 7 bar

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Very robust roller conveyor system with hydraulic lifting and lowering cross transfer. 1st section: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Installation height 1,000 mm. Integrated hydraulic lifting and lowering cross transfer with 4 chain strands. Distances: 1,500 - 1,300 - 1,000 mm. Fully sheeted. Hydraulic support rollers. Driven by geared motor. New bearings. Isdjt Hg Hujpfx Afisia 2nd section: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Integrated hydraulic lifting and lowering cross transfer with 6 chain strands. Cantilevered design, allowing cut material to be conveyed to the left or right beneath the roller track. Fully sheeted. Includes hydraulic power unit for both roller conveyors.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Offered for sale in this listing are various tank containers available for collection "ex-depot, stacked and ready for pick-up" 24,000 - 30,000 liters ADDITIONAL SERVICES – Tailored personally and individually for you! Upon request, we will... ✓ gladly provide you with a bespoke offer ✓ deliver containers to you quickly and hassle-free nationwide and even worldwide ✓ professionally modify containers to suit your needs ✓ rent containers to you exactly where you need them ✓ purchase your surplus or no longer required containers Other information: • Dimensions & weights available upon request • Offer valid while stocks last Iodpjwut Rfofx Afijia • Prices are subject to VAT (VAT will be stated separately) For further questions or a consultation, please feel free to contact us by phone.

Kondisi: baru, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternosters and storage lifts as of 31 December 2023. The company will no longer provide either support or spare parts for these units. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these devices. Please feel free to contact us at any time. Iedpjiy Dw Hefx Afioia

Tahun pembuatan: 2002, Kondisi: baik (bekas),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Data Umum Berat mesin: 2200 kg Iiedpfx Afex D Dwfoija Tinggi: 1700 mm Kedalaman: 1200 mm Dimensi Panjang mesin: 2200 mm Star SR 20 R III 3-sumbu ini diproduksi pada tahun 1996. Memiliki diameter pembubutan maksimum 20 mm, kecepatan spindle hingga 8.000 RPM, dan kecepatan pergerakan cepat 35 m/menit. Ideal untuk pembubutan presisi, mesin ini dilengkapi enam stasiun alat tetap dan lima stasiun alat radial bertenaga. Jika Anda mencari kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin Star SR 20 R III yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Bubut