Pengampelas sabuk lebar

INFOTRONIC COMPACT SATURN135RRK INF et SATURN 135 R

Kondisi: bekas, Tahun pembuatan: 2023, The machine is demonstration-ready and available from stock in Blomberg. Equipped with one HD pump Binks Maple 8/25 up to 175 bar and four Sames-Kremlin AVX Airmix spray guns. The machine features a switching valve for quick color changes, lever-switchable to max. 3 color circuits, and 1 rinse agent pump (options). Iedpfxsumvnhs Ab Ija The machine is supplied in ATEX (explosion-proof) configuration. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (1,300 mm) - Gun drive: single version - Dry extraction - Conveyor belt transport system - Continuously adjustable feed speed: 2 - 8 m/min - With paint recovery - Spray gun control: PLC, LS - Installed color circuits: 3 pcs. - Number of installed spray guns: 4 pcs. - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25 up to max. 175 bar - Including supply air filter ceiling - Suitable for water-based and solvent-based paints - Exhaust performance: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage, Frequency: 400 V / 50 Hz - Color: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can also provide you with an offer for assembly and commissioning of the plant, as well as training for your staff. On request, we also offer regular maintenance and servicing for the machine. For further information, please do not hesitate to contact us!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Wide Belt Sander DMC USK 1350 M3 - Made in Italy - Cross-belt unit (so-called 'sergeant') - Year of manufacture: 2011 - Electric and pneumatic ionizer TECHNICAL PARAMETERS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: - Cross-belt (so-called "sergeant") - Motor power: 12 kW 2nd unit: - Rubber drum - Hardness: 95 Shore - Diameter: 240 mm - Motor power: 18.5 kW 3rd unit: - Rubber drum - Hardness: 55 Shore - Drum diameter: 300 mm - Motor power: 15 kW 4th unit: - Pneumatic pad - Motor power: 15 kW 5th unit – cleaning brush – 2.2 kW 6th unit – air blower - Belt air blowing - Pneumatic oscillation Feed speed: 2.5–18 m/min Pneumatic belt tensioning Electric height adjustment Ijdpfjgr Er Sox Ab Iea Suction port diameters: - 3 x 200 mm, 8 x 80 mm, - 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 Iodju Atmuspfx Ab Ioa For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Kondisi: baik (bekas), ketinggian potong (maks.): 200 mm, lebar rantai: 400 mm, tegangan masuk: 380 V, jenis penyesuaian ketinggian: listrik, kecepatan rotasi (maks.): 3.400 rpm, daya: 37 kW (50,31 hp), Tinggi kerja MAKS: 200 mm Lebar rantai: 400 mm Ijdpfx Abstvpfmo Ioa Jarak MAKS antar pisau luar: 380 mm Diameter pisau (min/maks): 250 / 350 mm Kecepatan maju dapat diatur (inverter): 5 – 30 m/menit Panjang minimal benda kerja: 1000 mm Diameter as dudukan pisau: 70 mm Kecepatan putar as dudukan pisau: 3.400 rpm Daya motor: 2 x 37 kW

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Isdpfx Asd H Sc Eob Ioa Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, norwegian-01 Isdpfxemgc I Ns Ab Iea

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, de46e86e-7bbc-4d98-9c20-cd3433ad3e3a Isdpfxjv H E S To Ab Iea

Tahun pembuatan: 2001, jam operasional: 123 h, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 123, Chip silo diameter: 5 m Height: approx. 8 m Iedoftdv Uopfx Ab Ija Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Ijdpfxjt R T Hce Ab Ioa

Kondisi: baru, Tahun pembuatan: 2023, Orbital sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thickness for chairs, tables, beds, and related items. The main features of the machine are: frame made of electro-welded steel; rotating disc with 2 counter-rotating sanding belts driven by an electric motor, with a rotating movement around the workpiece; electrical control panel; 2 adjustable worktables (infeed – outfeed); option for mounting 2 automatic workpiece feed units with variable speed via frequency inverter. Sanding belts: 80 x 1260 mm Min./max. workpiece diameter: 10-100 mm (Ø) Min. curvature radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Isdoqnufvopfx Ab Iea Camam, Comec, OMEF, Brusa di Garboli