Kotak simulasi interior

IPETRONIK IPETRONIK Innenraumsimulationsbox

IPETRONIK Cabin Simulation Box
We offer you an IPETRONIK cabin simulation box.
Technical data and system description:
IPETRONIK cabin simulation box (new and unused)
The cabin simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It features a variable internal volume from 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or air conditioning unit is regulated and directed into the cabin.
With the cabin simulation box, only rear evaporators installed in the passenger compartment are tested. The insulated housing is mounted on an aluminium profile frame with castors. An internal chamber light is installed. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed, and the system stops. (TRIP TEMPERATURE: 80°C)

Technical data of the insulated chamber:
Dimensions:
External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm
Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm
Insulation:
80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m²K, building material class B1 according to DIN 4102

Technical data and description of the system:
Connection: tongue-and-groove system with foam-embedded eccentric locking hooks.
Surfaces:
Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320
Floor design:
2.0 mm stainless steel sheet 1.4301, SM-diamond, anti-slip,
Perimeter floor edges upturned at 90° (approx. 15 mm), floor flush with wall paneling,
Pressure distribution plate made of laminated wood, loadable with rubber wheels (support area > 4 cm²),
30,000 N/m² surface load, floor joints fully welded, integrated stainless steel floor drain pipe,
led downward through the floor
Chamber door:
Hatch-type single-leaf door, 800 x 1,200 mm, DIN left, heated door frame (230 V),
Silicone-free heating bands, all-round EPDM sealing profile,
Latch handle, lockable, emergency release,
Heated inspection window, 500 x 500 mm, triple-glazed,
Surface heating (230 V), frame heating (230 V), heating controlled externally,
Silicone-free edge band
Sliding wall:
1,680 x 1,180 mm, 80 mm polyurethane rigid foam, both sides 0.8 mm stainless steel sheet 1.4301,
ground, grain 320, protective film, enclosed by sheet metal on all sides
(The rear wall can be manually and steplessly adjusted to vary the volume)
Recirculation system:
A heat exchanger (Systemair) is mounted in the recirculation circuit for indirect temperature control. Air is circulated by a radial tube fan (Cosmo), heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. Heaters are permanently monitored by temperature monitors and limiters (Türk and Hillinger, Johnson Controls). Cooling is via a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo).
Installed electrical heating power: 1 x 6 kW.
Mix ratio: 50% water / 50% ethylene glycol.
Mains supply: =TME2++AS-QF21
Operating voltage: 400 V
Power: 17 kW
Rated current: 33 A
Fjdolypy Eopfx Adqogh
Main fuse: 35 A
Control voltage: 24 V DC / 24 V AC / 230 V AC
PLC system: S7 300
Type: IPETRONIK cabin simulation box
Condition: used
Scope of delivery: (see picture)
(Subject to changes and errors in the technical data and specifications!)
For further questions, feel free to contact us by phone.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.