Beli Johnson bekas (10)

Kondisi: bekas, These scraped surface heat exchangers can be used for the heating process of various products, such as tomato paste, puddings, margarines, oils, mayonnaise, etc. We have fully refurbished these units, including internal seals, rings, sandblasting, painting, new stainless steel frames, new control system, and motor testing and maintenance. TECHNICAL DETAILS OF THE VOTATOR: * Manufacturer: A. Johnson & Co London * Year of refurbishment: 2025 * Quantity: 5 units * Diameter: 6 inches * Metals: 316 grade stainless steel * Application: Horizontal type SPECIFICATIONS: * Chamber dimensions: 6" diameter stainless steel chamber * Length: 6' * 1 1/2" between end plates * Rotating center: 4 3/4" diameter stainless steel * Equipped with two PTFE scraper blades * Drive: 11 kW motor drives * Speed: 1470 rpm (via V-belt reduction) * Reducer: Results in a shaft speed of approximately 367 rpm AVAILABILITY: * Location: In stock * Available: Immediately GENERAL FORMULA FOR CAPACITY ESTIMATION: For a VOTATOR, the capacity can be roughly estimated using the following formula: [ \text{Capacity} = \text{Chamber Volume} \times \text{Turnover Rate} ] STEP 1: CALCULATE THE CHAMBER VOLUME The volume of a cylindrical chamber can be calculated as follows: [ V = \pi \times r^2 \times h ] Where: * ( r ) = radius (half of the diameter in inches), * ( h ) = height (length of the chamber in inches). Given: * Diameter = 6 inches, thus radius ( r = \frac{6}{2} = 3 ) inches * Length ( h = 6 \text{ ft} = 72 \text{ inches} ) Volume calculation: [ V = \pi \times (3)^2 \times 72 \approx \pi \times 9 \times 72 \approx 2036.75 \text{ cubic inches} ] To convert cubic inches to liters (since 1 cubic inch = 0.0163871 liters): [ V \approx 2036.75 \times 0.0163871 \approx 33.39 \text{ liters} ] STEP 2: ESTIMATE THE TURNOVER RATE The turnover rate depends on the VOTATOR speed and how often the chamber's contents can be processed. At a shaft speed of approx. 367 rpm, you can estimate about 1 turnover per minute for a basic approximation. FINAL CAPACITY ESTIMATION Assuming 1 turnover per minute: [ \text{Capacity} \approx 33.39 \text{ liters/min} ] SUMMARY The estimated capacity of each VOTATOR is approximately 33.39 liters per minute. CAPACITY CALCULATION: * Estimated capacity: 33.39 liters/minute Tsdpexxg T Esfx Aatjf CONVERT TO LITERS PER HOUR: [ \text{Capacity per hour} = 33.39 \text{ liters/min} \times 60 \text{ min/hour} ] [ \text{Capacity per hour} \approx 2003.4 \text{ liters/hour} ] SUMMARY The estimated capacity of each VOTATOR is approximately 2003.4 liters per hour.

Kondisi: sangat baik (bekas), Unit CIP terkontrol. Dipasang pada satu skid. 4 x Pompa Siemens, 2 x Filter Dosatron. Tjdpfjw Sduzsx Aatof

Kondisi: sangat baik (bekas), Saya menawarkan multi-rip Meren Jonson dengan otomatisasi: konveyor rol bermotor dengan sentralisasi, penyalur rol dengan pendorong samping, track karet, papan penekan di bawah poros untuk pemotongan elemen pendek. Pengaturan kecepatan maju halus, maksimum tinggi potong 100 mm, poros didukung, motor utama 75 Hp – 56 kW. Tsdpfx Aaexm Sd Ejtef

Kondisi: bekas, Differential pressure sensor, pressure transmitter -Manufacturer: Johnson, pressure transmitter -Type: P499ACH-401C -Quantity: 2 sensors available Todofylb Ispfx Aatjf -Price: per unit -Dimensions (box): 105/45/H40 mm -Weight: 0.1 kg/unit

Kondisi: sangat baik (bekas), Menawarkan gergaji multi-blade Meren Jonson dengan otomasi: - Konveyor rol bermotor dengan sistem sentralisasi - Konveyor rol penerima dengan penyorong samping Tsdpfexm Sczsx Aatef - Track karet - Penekan papan di bawah poros untuk pemotongan elemen pendek - Pengaturan kecepatan maju yang halus - Maks. tinggi potong 100 mm - Poros didukung - Motor utama 75 Hp - 56 kW Mesin serut: - Penyerutan atas/bawah - Lebar kerja 610 mm - Tinggi kerja 152 mm - Daya motor bawah 15 kW - Ketebalan pemotongan 12,7 mm - Pengaturan tinggi kerja secara elektrik - Kecepatan maju maks 30 m/menit - Pelumasan otomatis - Daya total 50 kW

Kondisi: bekas, Refrigeration compressor, refrigeration unit, cooling compressor, condensing unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange, dual pressure switch -Manufacturer: Johnson Controls, dual pressure switch, unused in original packaging -Type: P78MCS-9300 -Price: per piece -Quantity: 2 pieces -Package dimensions: 130/130/H70 mm Tsdpfefyfw Tex Aatjf -Weight: 0.7 kg/piece

Kondisi: baru, IPETRONIK Cabin Simulation Box We offer you an IPETRONIK cabin simulation box. Technical data and system description: IPETRONIK cabin simulation box (new and unused) The cabin simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It features a variable internal volume from 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or air conditioning unit is regulated and directed into the cabin. With the cabin simulation box, only rear evaporators installed in the passenger compartment are tested. The insulated housing is mounted on an aluminium profile frame with castors. An internal chamber light is installed. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed, and the system stops. (TRIP TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m²K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: tongue-and-groove system with foam-embedded eccentric locking hooks. Surfaces: Tsdpfjlypy Ejx Aatof Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM-diamond, anti-slip, Perimeter floor edges upturned at 90° (approx. 15 mm), floor flush with wall paneling, Pressure distribution plate made of laminated wood, loadable with rubber wheels (support area > 4 cm²), 30,000 N/m² surface load, floor joints fully welded, integrated stainless steel floor drain pipe, led downward through the floor Chamber door: Hatch-type single-leaf door, 800 x 1,200 mm, DIN left, heated door frame (230 V), Silicone-free heating bands, all-round EPDM sealing profile, Latch handle, lockable, emergency release, Heated inspection window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled externally, Silicone-free edge band Sliding wall: 1,680 x 1,180 mm, 80 mm polyurethane rigid foam, both sides 0.8 mm stainless steel sheet 1.4301, ground, grain 320, protective film, enclosed by sheet metal on all sides (The rear wall can be manually and steplessly adjusted to vary the volume) Recirculation system: A heat exchanger (Systemair) is mounted in the recirculation circuit for indirect temperature control. Air is circulated by a radial tube fan (Cosmo), heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. Heaters are permanently monitored by temperature monitors and limiters (Türk and Hillinger, Johnson Controls). Cooling is via a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating power: 1 x 6 kW. Mix ratio: 50% water / 50% ethylene glycol. Mains supply: =TME2++AS-QF21 Operating voltage: 400 V Power: 17 kW Rated current: 33 A Main fuse: 35 A Control voltage: 24 V DC / 24 V AC / 230 V AC PLC system: S7 300 Type: IPETRONIK cabin simulation box Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) For further questions, feel free to contact us by phone.

Kondisi: baik (bekas), Usine de mélange à cisaillement élevé Jordan MK1 Usine de mélange à cisaillement élevé en acier inoxydable de 100L, installation pour mayonnaise, mélangeur à cisaillement élevé à vitesse variable, 4 kW, cuve à double enveloppe pour vapeur, équipée d'une pompe à lobes Johnson en sortie, pompe à vitesse variable, installation mobile, alimentation triphasée. Todpfsw Dhhwjx Aatef

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), A total of 7 L-Unit Hermetique (Tecumseh) compressors, including Johnson Controls pressure regulators and 6 Bitzer heat exchangers, are available. 1) Compressor Tecumseh TAG4546Z, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1 l, coolant volume: 0.9 l, max. pressure refrigerant/coolant: 33 bar/10 bar, max. temperature refrigerant/coolant: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300. Documentation available. On-site inspection is possible. Tsdpjwzx T Eofx Aatef

Tahun pembuatan: 2011, jam operasional: 6.967 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, 1 York, Johnson Controls, water chiller, model: YLAA0390HE, with a cooling capacity of 390 kW (335,400 kcal/h), refrigerant gas R-410A, equipped with 5 scroll compressors, shell-and-tube heat exchanger, dimensions: 3690 x 2242 x 2393 mm (height), weight: 2805 kg, with 6 axial fans. Unit tested and supplied with warranty in Spain. Tsdpfxswg Hnnj Aatof