Truk container hook arm (roll-off)

IVECO IVECO STRALIS 310 SCARRABILE FULL PNEUMATICO

Kondisi: bekas, Tahun pembuatan: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Baujahr: Juli 2011 Palettengröße: 500 x 500 mm Verfahrwege: - X: 730 mm - Y: 730 mm - Z: 740 mm Spindeldrehzahl: 12.000 U/min Werkzeugwechsler: 40 Plätze Duodpfx Adev Tvh Segjl Späneförderer: Chrom

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Max. clamping force: 500 kN, opening stroke: 350 mm, mold installation height: 200 mm, heating capacity: 6.5 kW, screw diameter: 40 mm, weight: 2.33 t, no documentation available. Dusdpfx Adjilhfcegol

Kondisi: bekas, Tahun pembuatan: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing: Due to its vertical orientation, this machine series is by far the most flexible and productive machine at a very high quality level. In addition, the automatic return/rotation system for the panel enables fully automatic operation. The machine can process all 6 sides of a panel up to a height of 1300 mm. Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system using a PC with TPA Albatros software. The programming editor with high-level software interface enables simple and intuitive programming of the machine and also supports: * Linear, circular, and spiral interpolation * Double zero point * Mirror program management * Tool diameter optimizer for turret tools * Optimizer for independent spindle diameter Dsdpol Ikzgofx Adgsul * DXF file conversion (geometric conversion) * Import of work lists in ASCII format * Extra key for programming from the office * Barcode reader for tools * 17-inch LCD monitor * Professional operating system: Windows 7 Panel feeding and handling is managed via motorized vertical transfer with rollers and rubber-coated pressers to clamp the panel during processing; the motorized conveyor is 2000 mm long with electronically adjustable speed via inverter control. Photocells and the NC program ensure the introduction of one or more panels in sequence with selector selection. Height reading system for the panels consisting of an independent axis that can read the panel height before entering the machine. Reading tolerance of the dimension +/- 0.15 mm; if tolerance is exceeded, an alert is issued and the machine stops the current operation. System for reading panel thickness with a mechanical probe. Horizontal vice – M.O. axis: allows thickness of the workpiece to be measured by the program. Vertical vice – M.V. axis: allows the program to measure the height dimensions of the workpiece to be machined. Chain – X axis – patented double section with laser photocells that can read the reference zero point before performing operations. The double section allows processing on the underside of the panel, allowing machining on all 6 sides. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm: 24 independent spindles with a 32 mm pitch, arranged as follows: * 7 spindles aligned on the X axis * 17 spindles aligned on the Y axis Unit driven by a high-frequency motor enabling spindle rotation speed changes up to 7000 rpm. The brushless motor allows control of drilling depth and feed rate. Upper turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct drive transmission to the tool up to 18,000 rpm. The rotation of the turret is performed by a controlled axis with a brushless motor, enabling...

Kondisi: bekas, pendaftaran pertama: 09/2015, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, warna: biru, Perlengkapan: kunci diferensial, pendingin udara,

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 89037, berat benda kerja (maks.): 13.000 kg, PARALLEL LATHE CWGIIOOE 500x5000mm, weight 13,000 kg. Machine complete with 4-jaw independent self-centering chuck, 1000 mm diameter. Center height 500 mm. Distance between centers 5000 mm. Djdpfx Adovzxatjgoul

Kondisi: baik (bekas), RMF Vakuumtumbler Dodpjnmyx Eofx Adgoul Kapazität 1250 Liter Modell MM2 - LD2 Mit Behälterheber Komplett aus Edelstahl In exzellentem Zustand

Kondisi: bekas, Chaîne de peinture de marque System D8 de 94,50 mètres linéaires, complète avec chariot de traction, rails et chaîne. Dodpfxom D Hcfj Adgjul

Kondisi: baik (bekas), Tahun pembuatan: 2000, Bagian yang diperlihatkan dengan tangan di film atau foto tidak termasuk. 30 tempat alat pada alat penukar. Pendingin melalui spindle dengan tekanan 18 bar. Dusdpfxew Tl Dto Adgjl

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Fully automatic horizontal small bundle wrapping machine Automatic wrapping cycle with two standard modes: - Complete wrapping - End and tail wrapping only (see brochure) Dusdpfx Adepfdh Negel Complete plant with roller conveyors and return section to operator Very good condition

Kondisi: siap digunakan (bekas), Technische Daten 5 Achsen Maximale Werkstücklänge (einspännig): 6000 mm, Pendelbetrieb: 2375 mm Maximale Werkstückbreite hinten: 1300 mm Maximale Werkstückdicke: 300 mm (inkl. Spannvorrichtung) Konsolen mit Frontanschlag: 10 Stück Saugerhöhe 100 mm für die Unterseitenbearbeitung Vakuumpumpe: 2 x 100 m3/h Windows-Steuerungssystem Betriebssystem: Windows XP 17" TFT-Flachbildschirm WOODWOP-Programmiersoftware Grafische Darstellung der Spannstationen Moderne 3D-Grafik-Oberflächen-Software Fernwartung (Remote-Diagnose) Dusdpfx Aet Ttn Ejdgjl Betriebsspannung: 400 V, 50/60 Hz Steuerschrank rechts oder links platzierbar 5-Achs-Hauptspindel: 15 kW Antrieb HSK F63 Werkzeugaufnahme Flüssigkeitskühlung Elektronisch steuerbarer Drehzahlbereich: 1.000 – 24.000 min⁻¹ Maximale Werkzeuglänge: 230 mm Werkzeugdurchmesser: max. 180 mm für Fräswerkzeuge Maximal 350 mm für Sägeblattbetrieb Z-Achsenhub: 750 mm Vibrationssensor zur Spindelüberwachung während der Bearbeitung Scheiben-Werkzeugwechsler: 18 Plätze für D=130 Fräswerkzeuge HSK F63 Ablageplatz für Sägeblatt 350 mm Bohraggregat mit 25 Spindeln (19 vertikal, 2+4 horizontal, Nutfräser) Laserprojektion zur Positionierung der Saugerriegel und Anzeige der zu fräsenden Kontur (Programmierung in WOODWOP) Späneförderband Leistung und Motoren Spannung: 400 V Anschluss: Drehstrom Abmessungen (gesamt): Länge: 9.500 mm Breite: 5.000 mm Höhe: 3.450 mm