Gergaji mitre ganda

JAESPA CONCEPT 250 GTH

Kondisi: bekas, Tahun pembuatan: 1998, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular Gjdpfxju Sbpvj Ahuobk Saw band dimensions: 2965 x 27 x 0.9 mm Table height: mm Band speed: 37 / 76 m/min Total power requirement: 1.0 kW Machine weight: approx. 0.38 t Required space: approx. 1.0 x 1.6 x 1.4 m Double mitre bandsaw

Kondisi: bekas, Tahun pembuatan: 1997, Hydraulic press brake manufactured in 1997 in England, at the EDWARDS PEARSON factory. The press brake is in good condition and is sold complete with tooling. It has always been serviced and maintained on schedule. The machine is currently connected and can be tested or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Pressing force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: automatic X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Gedpsrfx Utsfx Ahusbk Weight: 7 t Other details: Recently fitted with a new screen and keyboard for more convenient operation. If you have any further questions, we would be happy to answer them.

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Gbodpfx Ahet Hwucjuok Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Tahun pembuatan: 2026, Kondisi: baru, Image 1: 10-ton machine jack with multi-position adjustable lifting claw, integrated hydraulic unit, external hydraulic connection, and low dead weight. Gbsdpfxjgi Dkco Ahuek Other images: Additional HTS ECO-Jack S-Series machine jacks – German quality workshop tool – NEW – in various load capacities from 3 to 25 tons, with integrated 520 bar hydraulics, rotatable pump lever, swiveling base plates, and adjustable lifting claw. External pump connection from 10-ton load capacity, dual pump from 15-ton load capacity. Please inquire about load capacities and other versions up to 50 tons. Delivery usually from stock.

Kondisi: baru, Tahun pembuatan: 2026, CORMAK HBS260 band saw for cutting pipes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed matter. This model features a swiveling arm 0-60°. The frame design ensures accurate and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics: The CORMAK HBS260 is a horizontal metal band saw with a swiveling arm, enabling cutting perpendicular to the axis of the material or at any angle from 0 to 60°. Material can be fed manually or by any mechanical means, while the tool feed operates automatically. The blade guides are equipped with special carbide plates and bearings, significantly enhancing blade guidance, longevity, straightness, accuracy, and cut quality. Carbide blade guides greatly reduce machine and blade wear. The unit is equipped with a high-performance coolant pump with a closed-loop coolant system. The saw arm is made from a solid cast-iron piece, paired with a 27 mm wide blade, allowing for efficient high-volume cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features quick clamping. The blade guides utilize hard metal (carbide) plates and a rolling bearing system. It is the CARBIDE BLADE GUIDES that are responsible for the saw’s precision and straightness. The upper part of the base is shaped to form a tray for collecting coolant and chips generated during cutting. Attached to the base is a cast iron worktable with a swiveling arm and a control panel mounted on a separate arm. During cutting, the main cutting movement is provided by the moving blade, while the feed is controlled by the arm's descent. The descent speed of the arm (cutting speed) is adjustable using a hydraulic cylinder. Feed speed is controlled from the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. In the lower position of the arm (after cutting is complete), the blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor after the cutting cycle is finished or when any of the covers are opened. Additional protection includes an automatic stop in case the blade breaks. Blade size [mm]: 2520 x 27 x 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 35, 70 Arm descent control: stepless, hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase, 400V Main motor power [kW]: 1.1 / 1.5 Coolant pump motor power [kW]: 0.05 Dimensions with base [cm]: 150 x 80 x 140 Weight [kg] (gross/net): 210 / 180 kg Gjdjudi Uzopfx Ahuebk Accessories included: 2 x M42 saw blades 5L Emulgol coolant ZW580 magnetic chip collector

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, tinggi total: 2.500 mm, panjang total: 2.200 mm, lebar total: 2.400 mm, panjang meja: 760 mm, lebar meja: 510 mm, beban meja: 1.000 kg, For sale: 3-axis CNC milling machine, Hurco model VMX 24 Technical specifications: - Year of manufacture: 2001 - Control: Winmax 4 - X-axis travel: 610.0 mm - Y-axis travel: 510.0 mm - Z-axis travel: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. workpiece weight: 1,000.0 kg - Machine length: 2,200.0 mm - Machine width: 2,400.0 mm - Machine height: 2,500.0 mm - Weight: 4,700.0 kg - Number of tool pockets: 24 Pull studs shown in the pictures are not included in the offer. Transport and loading can be organized throughout Europe at an additional cost upon request. All prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Gjdpfxjv Tcfks Ahuebk Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For more information or contact details, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 32.518 h, gaya penekanan: 250 t, jenis kontrol: Kontrol CNC, Panjang tekuk [mm]: 3550 Gaya tekan [ton]: 250 Kontrol: Cybelec DNC 906 PS A Jam operasi [jam]: 32518 - Pengunci cepat hidrolik untuk punch & die - Perangkat crowning hidraulik melalui CNC - Penahan belakang CNC 2-sumbu (X dan R) - 4 jari penahan yang dapat digeser secara manual - 2 alat bantu penekukan yang dapat dipindahkan Godpfexcmwrjx Ahuobk - Paket alat yang luas tersedia sebagai opsi

Kondisi: bekas, Tahun pembuatan: 2011, de2huitltlvnbnlpl-001 Gedpfx Ajwkvq Hjhuebk

Kondisi: baru, Tahun pembuatan: 2026, Horizontal metal-cutting band saw with a swiveling arm, designed for cutting metals, allows for cuts perpendicular to the axis of the material as well as at any angle from 0 to 60º. The material can be fed manually or by any mechanical feeder, with automatic tool feed. The blade guides feature dedicated carbide plates and bearings, which have a significant impact on blade guidance, durability, straightness of cut, and overall cutting precision and quality. The machine arm is made from profiled CAST IRON. The control panel is mounted on the arm. Power from the electric motor is transferred to the drive wheel of the cutting band via a geared worm drive. The cutting blade is tensioned over two cast iron wheels using a manual tensioner and is guided by an adjustable rolling and linear carbide guide set. Inside, there is a separate coolant tank with an electric pump. The arm downfeed speed (cutting speed) is controlled by a hydraulic cylinder, and feed rate is regulated from the control panel. Two blade speeds are available: 36 and 72 m/min. When the arm is in the idle position (after cutting), the band drive motor is automatically switched off. Safety is ensured by the blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened; additional protection is provided by automatic shutoff of the band saw in case of blade breakage. Technical Data Band saw dimensions 2455×27×0.9 mm Blade tension manual (mechanical) Blade speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm descent control stepless – hydraulic cylinder Gbjdpfxsvuf S Ne Ahuok Vise base height 900 mm Power supply 3-phase 400 V Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual operation yes CE Declaration yes Cutting capacities [circle / rectangle / square]: Angle | Round (ø) | Rectangle | Square 0º | ø230 | 260×150 mm | 225×225 mm 45º | ø165 | 180×130 mm | 165×165 mm 60º | ø105 | 100×90 mm | 110×110 mm *Please note: The machine is supplied by default without a CEE power connector as there are various types available. If you wish to receive a specific connector type with your machine, please contact the seller before or at the time of order.*

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Satz für robotergestütztes Plasmaschweißen. Gsdpforfuc Hsx Ahujbk Der Versand in EU-Länder erfolgt durch uns und ist kostenfrei.