Mesin penghancur kayu, mesin pencacah kayu

Jensen Först Bandit Schliesing Laski A540 DiXL V-2203 Spider Niveau

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 237042, daya: 25 kW (33,99 hp), berat keseluruhan: 1.575 kg, jenis bahan bakar: listrik, warna: kuning, Based on personal experience: The battery easily lasts a full workday even under continuous operation. Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Maximum wood diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (kg): 1575 Equipment: Power Control System – Whisper Cut chipping system Godpfxjvmz N Uj Ag Rjca The Schliesing mid-range series is now also available as an electric chipper: the Schliesing 325MX-E. The powerful brushless asynchronous motor with 25 kW output and 120 Nm torque guarantees high productivity with familiar pulling power. The batteries are designed to allow a full day’s work without recharging. The 325MX-E enables emission-free chipping with low noise levels and delivers uncompromising productivity for logs up to 20 cm in diameter. Motor and chassis: • Brushless asynchronous motor with 25 kW and 120 Nm torque • Fully galvanized, corrosion-resistant single-axle chassis rated for 80 km/h including EU type approval • Robust, fixed and widened steel fenders • Heavy-duty support wheel at the front and rear support stand • Hitch with overrun brake and soft-dock ball coupling or DIN towing eye • LED lighting conforming to German Road Traffic Licensing Regulations (StVZO), impact-protected • Pneumatic tires 205/65 R15 C Battery: • LEP battery (Lithium Iron Phosphate) with a capacity of 300 Ah at 96 V • Enables full-day operation without recharging, no recharging required after long idle periods • Energy recovery through regeneration of blade disc kinetic energy during operation • Charging port: standard plug 220-240V/16A • Full charging time: 8 hours • Guarantee for 1,000 charge cycles at 80% State of Health (SOH) Housing / feed hopper / discharge chute: • Folding feed hopper with minimum feed depth of 1,500 mm • Fully galvanized, corrosion-resistant hopper flap • Hopper inner dimensions: width = 1,040 mm, height = 960 mm • Swiveling discharge chute with adjustable deflector • Discharge chute mounted on ball bearing turntable • Key machine parts with sound insulation (especially chipper hood and discharge chute) • Two emergency stop switches: on top of the hopper and on the side of the hopper flap Chipping system: • Chipping system with safety cut-off as per EN 13525 • Robust chipping disc Ø 655 mm, 35 mm thick • Enclosed knife system for fast, safe, and precise knife changes • Continuously adjustable chipper knives • Chipper knives can be reground multiple times for long service life (approx. 10x) • Horizontally usable counterknife and vertically usable counterblade, each two-fold for increased service life • Anti-wrap protection at the main bearing of the rotor disc Hydraulic feed: • Feed control with independent hydraulic circuit • PowerGrip feed roller, 240 mm wide, with hydraulic feed. Highly grippy, aggressive, and uniform feed through a separate hydraulic motor on each roller • Parallel-guided top roller ensures regular and uniform feed, preventing material jamming • Hydraulically adjustable feed speed and, therefore, chip size • Hydraulic tank fill level indicator OPTIONS OVERVIEW: The Whisper Cut® • V-shaped knives draw in wood more evenly and with less vibration • In combination with the centering PowerGrip roller, chipping produces minimal movement of the material

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Wood shredder (wood chipper) machine, model MION e MOSOLE TR 2 Used machine Operation in automatic and/or manual mode Working condition: excellent Gcodpjw Hwpvefx Ag Rja In automatic mode, the motor starts in the opposite direction to clear the pusher from any residues of previous operations. In full automatic mode, the motor stops after approx. 5 seconds and then restarts in the correct direction for continuous operation (see video). Technical data: - Hydraulic pusher - Rotor width: 700 mm - Rotor diameter: 300 mm - Shredding unit speed: 100 rpm - Hopper volume: 3.42 m³ - Main motor: 25 HP - Hydraulic power unit for pusher: 1 HP - Replaceable knives - Top feed

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The Brugger PX130 wood chipper is powered via the tractor’s PTO and is capable of processing logs with a diameter of up to 13 cm. Its robust construction and high-quality materials ensure reliable performance. Gedpfxorblwds Ag Reca Technical specifications: - Hydraulic feed - Maximum log diameter: 13 cm - Weight: 420 kg - PTO speed: 540 rpm - Tractor power requirement: 30-70 HP With its hydraulic feed system, it offers an efficient solution for wood processing in various agricultural and forestry applications. Contact us for your tailored offer!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, daya: 33 kW (44,87 hp), berat keseluruhan: 1.570 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, bahan bakar: diesel, Schliesing 325EX‑D Wood Chipper: The Compact Model with Rotating Chipping Unit The Schliesing 325EX‑D wood chipper is a powerful machine designed for demanding wood processing applications, featuring a robust engine, versatile feeding options, and sturdy construction. Its swiveling infeed hopper and extensive safety features meet the highest standards, delivering an efficient solution for processing logs up to Ø 20 cm in diameter. Technical Data: Type: Schliesing 325 EX Log capacity: Up to Ø 20 cm Infeed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: approx. 1,570 kg Godpfjv Ev E Uox Ag Rjca Features: Engine and Chassis: - Water-cooled, Stage V 4-cylinder Kubota common-rail turbo diesel engine with DPF, rated at 33 kW / 44.9 HP - Industrial overrunning clutch between engine and flywheel to protect the engine, bearings, and shaft - Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h, EU road homologation - Rugged, fixed sheet steel mudguards - Device for front jockey wheel and rear support leg - Lighting in accordance with road traffic regulations (StVZO) featuring impact-protected components - Pneumatic tyres 205/65 R15C, EU homologated Housing/Hopper/Discharge Chute: - Foldable infeed hopper with a minimum input depth of 1,500 mm - Fully galvanized hopper cover for long service life - Hopper dimensions (internal): width = 1,040 mm, height = 960 mm - Swiveling discharge chute with adjustable deflector flap - Discharge chute mounted on slewing ring for variable orientation - Noise insulation on key machine parts such as the chipper housing and discharge chute - Emergency stop button on top of the hopper and at the side of the hopper cover Chipping Mechanism: - Rotating chipper housing with adjustable input angle up to 270° - Safety interlock in accordance with EN 13525 - Flywheel with a diameter of Ø 655 mm and thickness of 35 mm - Enclosed knife system for rapid and safe blade changes - Continuously adjustable chipper knives, re-sharpenable multiple times for extended service life - Horizontal counter-blade and vertical counter-edge, each usable on two sides for long durability - Winding protection on the main bearing of the flywheel Hydraulic Feed: - Feed control with dedicated hydraulic circuit - PowerGrip infeed roller (240 mm wide) with hydraulic feed for firm and uniform material transport - Parallel guide of upper roller for smooth feed with no jamming - Hydraulically adjustable feed speed to control chip size - Hydraulic oil tank level indicator.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 580, panjang pemotongan (maks.): 5.180 mm, panjang total: 6.400 mm, berat keseluruhan: 580 kg, Petrol-powered mobile sawmill SMG EUROPA 1000 - 100% rigid steel frame - fully welded construction HONDA engine, 25 HP - 800 cc Gcodpfx Agsq H H E No Rja Maximum diameter: 100 cm - Cutting length: 518 cm Maximum opening between rollers: 71 cm Blades: 35 mm wide - 22.2 mm pitch - 4245 mm length. Blade height locking via electric actuator; manual handwheel positioning with return spring for quick and precise operation. Manual feed (by pushing). Optional: Dedicated trailer for moving the unit on-site Optional: Sharpening/Setting kit for blade maintenance Optional: Hydraulic cylinder for taper compensation Optional: Extensions and additional rails for extra-long cuts Immediate availability

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, daya: 160 kW (217,54 hp), tegangan masuk: 380 V, masa garansi: 12 bulan, tahun perombakan terakhir: 2023, Perlengkapan: dokumentasi / manual, 1 Pellet press brand: Buhler DPAB Die inner diameter: 660 mm Die running surface: 138 mm Press is equipped with 1 motor, 160 KW. Press door is made of stainless steel and features an overload flap in the door. 2-roller pellet press with 2 rollers on the press, overhauled in either a dimpled or grooved design. Press is complete with die lifting device and tools included. The press has been fully refurbished and fitted with new bearings and wear parts, such as front and rear scrapers, die retaining ring, etc. Also fitted with new V-belts. All safety requirements will be observed and suitable switches for Gcjdjrah Evopfx Ag Rsa friction protection, door safety switch, and inspection hatches will be installed.

Kondisi: bekas, SPE Renergi Niedertemperatur-Trockner Der Renergi Trockner wird zur Trocknung von Sägemehl und anderen Materialien zur Herstellung von Biokraftstoffen eingesetzt. Der Trockner kann Sägemehl, Rinde oder Hackschnitzel von einem Feuchtigkeitsgehalt von ca. 50 % auf einen Wert von etwa 10 % trocknen. Dieser Niedertemperatur-Trockner nutzt Warmwasser (oder Heißwasser) ab einer empfohlenen Temperatur von 65 °C. Die maximale Wassertemperatur beträgt 110 °C. Netzanschlusssicherheit: Der Trockner darf ausschließlich mit 3x400 V AC (630 A) 50/60 Hz und einer separaten Schutzleiterzuleitung betrieben werden. Netzanschluss-Daten: • Spannung: 400 V AC, Drehstrom • Empfohlene Absicherung in der Zuleitung: maximal 3x630 A • Typischer Stromverbrauch: 200 kW Gcsdpfx Agowp Rqfj Rea Die Abmessungen des Trockners betragen ca. 17,4 x 5,7 Meter, bei einer Höhe von 10,7 Metern. Die erforderliche Stellfläche beträgt etwa 21,4 x 8,0 Meter. Die Mindestdeckenhöhe sollte 15 Meter betragen (bzw. mindestens 4 Meter über dem Einlauf des Mediums). Luftzufuhr: Für den Betrieb dieser Anlage ist eine Frischluftmenge von mindestens 24 kg Gas/s erforderlich, was 20 Nm³/s oder 72.000 Nm³/h entspricht. Luftdurchsatz: max. 200 Liter/min Luftdruck: mindestens 4,5 bar, empfohlen 6,0-8,0 bar Wasserversorgung: Heißwasserzufuhr mit einem Durchfluss von 32 dm³/s. Wasserdruck: min. 1,5 bar, max. 6,0 bar Betriebstemperaturbereich: • Zulufttemperatur: -20 °C bis 50 °C • Relative Luftfeuchtigkeit: 0 % bis 60 % Rohmaterial/Medium: • Ausgangs-Feuchtigkeit: 45 % bis 55 % (Gewichtsprozent) • Ziel-Feuchtigkeit: 8 % bis 15 % im getrockneten Material Kapazität: • Der Zwei-Kammer-Trockner mit 4 m Breite verarbeitet typischerweise 2.400 kg Material mit 55 % Feuchtigkeitsgehalt pro Charge • Der Trockner kann 6.000 kg Rohmaterial mit einem Feuchtigkeitsgehalt von 55 % auf 10 % in etwa einer Stunde trocknen Der Trockner von SRE ist nach den europäischen Richtlinien konstruiert. Die Anlage erfüllt die grundlegenden Anforderungen der: • Maschinenrichtlinie 2006/42/EG • Niederspannungsrichtlinie (LVD) 2006/95/EG • EMV-Richtlinie 2004/108/EG Der Trockner befindet sich in der Gemeinde Straupe, Bezirk Cēsis, LV-4152, Lettland. Besichtigung an Werktagen von 08:00 bis 17:00 Uhr nach vorheriger Terminvereinbarung möglich. Der Trockner ist bereits demontiert. Sämtliche Elektropläne, Handbuch und Bedienungsanleitungen sind vorhanden. Auf Wunsch kann ein Ansprechpartner mit Erfahrung im Betrieb dieses Trocknertyps zur Beratung vermittelt werden. Preis: 20.000,00 EUR (zzgl. MwSt.)

Kondisi: baru, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use. Thanks to its high-quality construction and powerful drive, even heavily branched material is no problem! It effortlessly processes logs with diameters up to 16 cm. Powered by a robust 35 HP Rato petrol engine, it is also equipped with a no-stress automatic feed system, which prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system to meet your requirements. Thanks to its road approval, the chipper can be transported anywhere. Gcedpfx Asmfnz Esg Rea Features: - Maximum log diameter: 16 cm - Feed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Delivery possible throughout Europe. -- Trailer chipper, wood chipper, wood shredding machine, branch chipper, professional chipper, wood shredding machine

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, kapasitas pemanasan: 50 kW (67,98 hp), Wood chip heating system with 50 kW thermal output Gcedsv Ngq Aspfx Ag Roa already dismantled complete with boiler, stoker unit, and discharge system

Kondisi: baru, High-quality wood chipper for professional use – easily handles heavily branched material! Thanks to road approval, the HX16 Pro can be quickly and easily transported anywhere. The HX16 Pro wood chipper is specially designed for professional applications and features a robust construction and powerful drive, enabling it to efficiently process even heavily branched material without effort. This chipper easily processes logs with an impressive diameter of up to 16 cm. It is powered by a robust 35 HP Rato petrol engine and equipped with a no-stress automatic feed system that prevents engine stalling under overload, ensuring smooth operation at all times. The HX16 Pro comes with an AL-KO chassis and lighting system to meet your requirements. Key features of the HX16 Pro wood chipper: - Maximum log diameter: 16 cm - Feed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Experience the power and reliability of a professional wood chipper with the HX16 Pro. Contact us for a tailored quotation! Gcsdpetr Azgefx Ag Roa