Mesin penggiling permukaan

Jones & Shipman 1400X

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.750 mm, lebar total: 2.800 mm, tinggi total: 1.830 mm, persyaratan ruang panjang: 2.800 mm, lebar yang dibutuhkan: 2.850 mm, kebutuhan tinggi: 1.900 mm, produsen motor: Bitzer, laju aliran volumetrik: 940 m³/jam, EN: Two used Bitzer screw compressor skids for low-temperature Freon applications. Both skids are supplied with a shared control panel. Originally, each skid was intended for a separate cold store, but the capacities listed in the specifications are combined. Skid 1 is fitted with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Dksdpsx Ap Hpsfx Aaqjl Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW DE: Zwei gebrauchte Bitzer-Schraubenverdichterskids für Niedertemperaturanwendungen mit Freon. Beide Skids werden mit einem gemeinsamen Schaltschrank geliefert. Ursprünglich war jeder Skid für einen eigenen Tiefkühlraum vorgesehen, die in den technischen Daten angegebenen Leistungen sind jedoch zusammengerechnet. Skid 1 ist ausgestattet mit zwei Bitzer HSN 7461-70-40P halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern. Dieser Skid hat ein Fördervolumen von 440 m³/h bei 50 Hz und 532 m³/h bei 60 Hz. Skid 2 wird mit zwei Bitzer HSN 7471-75 halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem WTT GmbH WP 7M-44 gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern geliefert. Dieser Skid hat ein Fördervolumen von 500 m³/h bei 50 Hz und 600 m³/h bei 60 Hz. Bitzer HSN 7461-70-40P (x2) Leistungen: -20ºC/+40ºC: 229,6 kW -30ºC/+40ºC: 157,4 kW -40ºC/+40ºC: 102,0 kW -45ºC/+40ºC: 79,8 kW Bitzer HSN 7471-75 (x2) Leistungen: -20ºC/+40ºC: 240,6 kW -30ºC/+40ºC: 165,8 kW -40ºC/+40ºC: 109,0 kW -45ºC/+40ºC: 86,0 kW

Kondisi: bekas, Tahun pembuatan: 1994, Turning diameter 570 mm Turning length 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide 365 mm Main spindle speeds: 3-2,500 rpm Main spindle drive power 15/19 kW Spindle bore 62 mm Spindle nose DIN 55027 No.8 Tailstock taper MK 5 Dkedpeu Sbkgsfx Aaqol Quill stroke 190 mm Quill diameter 80 mm Feed range – longitudinal and transverse 0.01-50 mm/rev Total power requirement 50 KVA Machine weight approx. 5 t Space requirement approx. m Incl. Forkardt chuck F315 Incl. 6 pcs Multifix holders Incl. 1 pc closed steady rest Incl. 1 pc open steady rest

Kondisi: bekas, Tahun pembuatan: 1986, en-GB Dodpju Dimyofx Aaqokl

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, it-hu-01 Dsdpfxsg Npiwj Aaqekl

Kondisi: bekas, Tahun pembuatan: 2007, Kecepatan putar 8000 rpm Berat 5500 kg Tahun pembuatan 2007 Kontrol Siemens 840D Dimensi (Panjang/Lebar/Tinggi) 3600 x 2800 x 2400 mm Dkedpfx Aaswm Rqasqjl Perjalanan sumbu-x 1035 mm Perjalanan sumbu-y 560 mm Perjalanan sumbu-z 510 mm Lebih banyak gambar tersedia

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Grinding area: 2000 x 900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle centre: 845 mm, magnetic chuck dimensions: 2000 x 800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500 x 100 x 203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. Inspection on site is possible. Djdpfxsuyk N Ij Aaqjkl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.44.00.407, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 500 kg, tinggi total: 3.200 mm, lebar total: 3.200 mm, lebar meja: 600 mm, tinggi meja: 2.400 mm, panjang meja: 600 mm, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 20.000 rpm, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 20.000 rpm, daya motor spindle: 15.000 W, jumlah spindel: 1, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MIKRON-UCP800Duro-2018 Dksdpfx Aaex D Ux Tjqol

Kondisi: baru, Tahun pembuatan: 2025, de Djdpfohwrgtox Aaqekl

Kondisi: baru, Mesin frais universal Merek: OPTimill Model: MT 50 No. Art.: 3336005 Kondisi: Mesin baru Perjalanan sumbu: - Sumbu X 580 mm - Sumbu Y 200 mm - Sumbu Z 340 mm Dilengkapi standar dengan: - Display digital 3 sumbu DPA 31 PLUS - Feeding otomatis pada sumbu X - Arbor frais panjang 16 mm - Arbor frais panjang 22 mm - Dudukan chuck bor B 18 - Chuck bor gerigi 3-16 mm/B 18 - Adaptor reduksi MK 2 dengan slot pendorong - Adaptor reduksi MK 3 dengan slot pendorong - Lampu mesin Dedpfx Ajbnfxujaqekl - Sistem pendingin - Perlengkapan alat operasi - Manual instruksi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 510 mm, diameter pembubutan: 300 mm, lubang spindel: 61 mm, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 210 mm, jarak gerak sumbu Z: 560 mm, gerak cepat sumbu X: 30 m/menit, pergerakan cepat sumbu Z: 36 m/menit, For sale: Doosan LYNX 2100LMA CNC Turning Center – Year 2019 – Excellent condition, immediately ready for operation! This listing offers a Doosan LYNX 2100LM CNC turning center, a powerful machine for the precise machining of rotational components such as shafts, cones, spheres, as well as internal and external threads. The machine is in excellent technical condition, immediately available, and can be inspected on site. Key features: - High precision and reliability for both series and single-part production - Large tool turret with 24 tools (including driven tools) Dkedpfx Aasyftatsqel - CNC control: SIEMENS Sinumerik 828D - High-performance spindle and driven tools for maximum productivity - Spindle bore 61 mm enables machining of various workpiece sizes Technical specifications: - Year of manufacture: 2019 - Max. turning length: 510 mm - Max. turning diameter: 300 mm - X-axis travel: 210 mm - Z-axis travel: 560 mm - Swing over bed: 600 mm - Swing over tailstock: 400 mm - Spindle bore: 61 mm - Max. bar diameter: 51 mm - Max. spindle speed: 6,000 rpm - Number of turret stations: 24 (including driven tools) - CNC control: SIEMENS Sinumerik 828D - Dimensions (L x W x H): 2805 x 1582 x 1693 mm - Weight: 3,500 kg The machine is fully operational, under power, and available for inspection.