Mesin sentrifugal berpendingin sentrifugasi

Jouan CR 4 22

Kondisi: sangat baik (bekas), Here we offer a Weiss climate test chamber. Model: SB2/500/80, water-cooled Cooling/heating range: -75°C to +180°C Climatic operation: +10°C to +95°C Humidity range: 10% to 98% r.h. Temperature stability, temporal: ±0.2K Humidity stability: ±1% r.h. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feedthroughs: Pgedpfx Abom Tvzcs Iew Left side: ∅ 100 mm Right side: ∅ 50 mm Mains connection: 400V / 3Ph + N + PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your safety as the buyer, please note the following information! The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspections, the chambers undergo a test run monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), Operating temperature: 10-300°C, Set temperature: 20-300°C, Setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, Temperature sensor: 1x Pt100 DIN Class A, 4-wire measurement, Control: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, Timer: 1 minute to 99 days, Functions: SetpointWAIT, calibration of 3 temperature values, parameter selection (temperature, circulating air fan, exhaust, program run time, time zones), electronically adjustable air turbine, adjustable in 10% increments, fresh air via adjustable exhaust flap with preheating, exhaust nozzle with throttle valve, electronically adjustable, Logging: data storage in case of power failure, Programming: data logger evaluation via Ethernet, AtmoCONTROL software optionally via USB, Safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, Internal dimensions: 400x320x250mm, Volume: 32l, Max. shelves: 3, Max. load: 60kg, Max. load per shelf: 20kg, Length: 650mm, Width: 660mm, Height: 890mm, Weight: 45kg. The oven has hardly been used. Inspection on site is possible. Podjw Tl Ilspfx Ab Isgw

Kondisi: sangat baik (bekas), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and provide sufficient ventilation for the machine compartment, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with ports on the right and left sides, allowing measurement lines and test equipment to be routed into the test chamber interior. Standard ports installed: R1: DN 125 mm L1: DN 50 mm Test Chamber Interior Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Exterior Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C temporal deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Psdpfxowh Ttme Ab Isgw Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temporal temperature deviation at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at the center of usable space: ±1 to ±3 % r.h. Electrical connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be provided onsite Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your security as a buyer, please note the following: The following measures are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors reserved!) We are happy to answer any further questions by phone.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, JOUAN GR 412 ist eine Labor-Tischzentrifuge, die für klinische und wissenschaftliche Anwendungen konzipiert wurde. Diese Zentrifuge ist mit einer Vielzahl von Funktionen ausgestattet, die sie zu einem idealen Werkzeug für die schnelle und effiziente Trennung von Partikeln oder Verbindungen unterschiedlicher Molekulargewichte, Dichten oder Größen auf Grundlage ihrer relativen Zentrifugalkraft machen. Die GR 412 Zentrifuge erreicht eine maximale Drehzahl von bis zu 15.000 U/min sowie ein maximales RCF von 4.440 g. Sie ermöglicht Zentrifugiergeschwindigkeiten bis zu 10.000 U/min und bietet Ausschaltzeiten bis zu 60 Minuten, abhängig vom Rotor- und Geschwindigkeitseinstellungen. Darüber hinaus bietet die JOUAN GR 412 eine Auswahl an verschiedenen Rotoren, darunter Festwinkel- und Ausschwingrotoren, die je nach Probenanforderung eingesetzt werden können. Das Gerät verfügt über ein leistungsstarkes, digitales Kontrollsystem zur präzisen Regelung von Geschwindigkeit und RCF sowie ein digitales Display, das die programmierten Einstellungen sowie eventuelle Fehlermeldungen anzeigt. Zu den umfangreichen Sicherheitsfunktionen gehören eine Zentrifugen-Unwuchtkontrolle und ein Schutz bei Stromausfall, um Probenverlust und Geräteschäden vorzubeugen. Die Zentrifuge ist für eine einfache Handhabung konzipiert und bietet nützliche Ausstattungsmerkmale wie einen luftgekühlten Kondensator zur Verringerung von Temperaturschwankungen und eine isolierte Kammer, die sowohl Kontamination als auch Auskühlung verhindert. Zudem lässt sich die Zentrifuge mit verschiedenem Zubehör wie Adaptern und Reduziereinsätzen nutzen. Die Wartung gestaltet sich unkompliziert: Die Zentrifuge lässt sich leicht reinigen, schnell abwischen und bleibt so frei von Verunreinigungen. Der Betrieb ist zudem relativ geräuscharm, was sie auch für den Einsatz in geräuschsensiblen Umgebungen geeignet macht. Insgesamt ist die GR 412 Zentrifuge eine leistungsstarke, zuverlässige und benutzerfreundliche Zentrifuge, die sich ideal für allgemeine Labor- und klinische Anwendungen eignet. Dank des digitalen Kontrollsystems, der umfangreichen Sicherheitsfunktionen und der einfachen Bedienbarkeit ist sie hervorragend für die schnelle Trennung von Partikeln und Verbindungen unterschiedlicher Größe, Dichte und Molekulargewichte geeignet. Pjdpfx Aoqyyl Tjb Ijgw

Kondisi: sangat baik (bekas), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Machine For sale is a high-quality, used pendulum impact testing machine, model HIT5.5P from manufacturer Zwick / Roell. This device is ideally suited for instrumented impact testing according to Charpy and Izod standards on plastics, metals, or composite materials. Device data: Device: HIT5.5P Version: V2.8 HIT Pendulum: 5 J Charpy Current pendulum energy: 5.000 J Friction: 0.017 J Friction compensation: No-load blow Impact velocity: 2.9 m/s Pendulum mass: 1.19 kg Release angle: 107.46 ° Pendulum length: 330.0 mm Technical data: Model: Zwick / Roell HIT5.5P Max. impact energy: 5.5 Joules Podpfewqfnujx Ab Isgw Test methods: Charpy, Izod (instrumented) Data acquisition: Force-time and displacement-time curves Power supply: 230 V / 50 Hz Scope of delivery: Zwick Roell HIT5.5P incl. 5.5 J pendulum Control unit with operating panel Power and connection cables Shipping by freight forwarder (pallet shipping) – costs on request Collection by appointment in Borken possible. Condition: used (Subject to changes and errors in the technical data!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Vötsch Climate Test Chamber We offer here a Vötsch climate test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Cable port: Ø 125 mm / Ø 50 mm Specifications for temperature tests: - Temperature range: -42°C to +180°C - Temporal temperature deviation: ± 0.1 to ± 0.5 K - Spatial temperature uniformity: ± 0.5 to ± 1.5 K - Temperature change rate: Heating 4.0 K/min, Cooling 3.0 K/min - Max. heat compensation at +20°C: 4,500 W Specifications for climatic tests: - Temperature range: +10°C to +95°C - Dew point range: -3°C to +94°C - Humidity range: 10 to 98% r.H. - Temporal temperature deviation: ± 0.1 to ± 0.3 K - Spatial temperature uniformity: ± 0.5 to ± 1.0 K - Temporal humidity deviation: ± 1 to ± 3% r.H. - Max. heat compensation: 500 W Mains voltage: 3/N/PE AC 400V ±10% 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 Important information for buyer safety! The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) Podpfx Abeqnutmj Isgw (Specifications are subject to change and error!) For further questions, please do not hesitate to contact us by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Model: VCS 7018-5 Climatic Test Chamber with Humidity, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Technical Data for Temperature Testing: Temperature Range: -70°C to +180°C Temporal tolerance: ± 0.1 to ± 0.5 K Spatial tolerance: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Technical Data for Climatic Testing: Temperature Range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ± 0.1 to ± 0.3 K Temperature deviation (spatial): ± 0.5 to ± 1 K Podpfxov N Hc Eo Ab Iegw Temperature gradient: 1 to 2 K Humidity fluctuation (temporal): ± 1 to ± 3% r.h. Dew point range: -3 to +94°C Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 10 kW Rated current: 21 A Fuse: 32 A slow-blow, on site Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to changes and errors!) If you have any further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss Type: WT3-1000/40 Pgedpfx Asthhw Aob Isw Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Operating Unit: "Touch Panel" All control and operating commands can be triggered at the operating unit "Touch Panel" simply by touching the function icons. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs Feedthroughs are installed on both the right and left sides of the test chamber. These allow measurement leads and test equipment to be routed into the test room. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Internal Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Data for Temperature Testing: Temperature Range: -40 to +180 °C Temporal temperature deviation at center of working space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Operating Data: Test chamber lighting: Halogen bulbs 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10%, 50 Hz Rated current: 22.0 A, Rated output: 11.5 kW Required fuse by customer: 32 A slow-blow Sound pressure level (approx.): Measured at a distance of 1 m in front, at a height of 1 m: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your security as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. New charging with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data. All specifications subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss temperature chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume approx. 990 liters Specifications for temperature tests: Temperature range: -70°C to +180°C Temporal temperature deviation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 5 K/min Cooling: 5 K/min Thermal compensation: max. 2750 W Standard feedthroughs installed: R1: NW 125 mm L1: NW 50 mm Dimensions: Internal chamber dimensions: width 1100 mm x depth 950 mm x height 950 mm External dimensions: width 1390 mm x depth 1525 mm x height 1995 mm Maximum load (evenly distributed) on chamber floor: 150 kg Per grid shelf: 50 kg Total shelf load: 100 kg Operating data: Pedsp Dun Ajpfx Ab Iegw Chamber lighting: Halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 27.0 kW Rated current: 42.02 A Heat dissipation (water-cooled test chambers): max. heat to ambient 1.3 kW Noise measurement: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and provide sufficient ventilation for the machine compartment, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with ports on the right and left sides, allowing measurement lines and test equipment to be routed into the test chamber interior. Standard ports installed: R1: DN 125 mm L1: DN 50 mm Test Chamber Interior Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Exterior Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C temporal deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Pgedpfewgaykex Ab Iow Specifications for Climate Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temporal temperature deviation at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at the center of usable space: ±1 to ±3 % r.h. Electrical connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be provided onsite Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your security as a buyer, please note the following: The following measures are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors reserved!) We are happy to answer any further questions by phone.