Incubator / Drying oven

Memmert B 30

Kondisi: sangat baik (bekas), Here we offer a Weiss climate test chamber. Model: SB2/500/80, water-cooled Cooling/heating range: -75°C to +180°C Hjdpfx Ahom Tvzconsfh Climatic operation: +10°C to +95°C Humidity range: 10% to 98% r.h. Temperature stability, temporal: ±0.2K Humidity stability: ±1% r.h. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feedthroughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Mains connection: 400V / 3Ph + N + PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your safety as the buyer, please note the following information! The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspections, the chambers undergo a test run monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Kondisi: bekas, Bak sirkulasi eksternal, termostat sirkulasi, bak temperatur, bak air, bak sirkulasi BROOKFIELD Tipe TC-102D No. Seri: D07200476 Hfsdpfx Ajxcbnxshnsh Rentang suhu: +5 °C hingga +150 °C Stabilitas suhu: ±0,05 °C Homogenitas suhu

Kondisi: sangat baik (bekas), Weiss Type: WT3-1000/40 Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Operating Unit: "Touch Panel" All control and operating commands can be triggered at the operating unit "Touch Panel" simply by touching the function icons. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs Feedthroughs are installed on both the right and left sides of the test chamber. These allow measurement leads and test equipment to be routed into the test room. Standard feedthroughs installed: R1: nominal width 125 mm Hjdpfxsthhw Aj Ahnefh L1: nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Internal Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Data for Temperature Testing: Temperature Range: -40 to +180 °C Temporal temperature deviation at center of working space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Operating Data: Test chamber lighting: Halogen bulbs 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10%, 50 Hz Rated current: 22.0 A, Rated output: 11.5 kW Required fuse by customer: 32 A slow-blow Sound pressure level (approx.): Measured at a distance of 1 m in front, at a height of 1 m: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your security as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. New charging with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data. All specifications subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss temperature chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume approx. 990 liters Specifications for temperature tests: Temperature range: -70°C to +180°C Hfsdpfop Dun Ajx Ahnoh Temporal temperature deviation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 5 K/min Cooling: 5 K/min Thermal compensation: max. 2750 W Standard feedthroughs installed: R1: NW 125 mm L1: NW 50 mm Dimensions: Internal chamber dimensions: width 1100 mm x depth 950 mm x height 950 mm External dimensions: width 1390 mm x depth 1525 mm x height 1995 mm Maximum load (evenly distributed) on chamber floor: 150 kg Per grid shelf: 50 kg Total shelf load: 100 kg Operating data: Chamber lighting: Halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 27.0 kW Rated current: 42.02 A Heat dissipation (water-cooled test chambers): max. heat to ambient 1.3 kW Noise measurement: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and provide sufficient ventilation for the machine compartment, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with ports on the right and left sides, allowing measurement lines and test equipment to be routed into the test chamber interior. Standard ports installed: R1: DN 125 mm L1: DN 50 mm Test Chamber Interior Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Exterior Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C temporal deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temporal temperature deviation at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at the center of usable space: ±1 to ±3 % r.h. Electrical connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be provided onsite Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Hsdjwgaykspfx Ahnjfh Weight: approx. 460 kg net For your security as a buyer, please note the following: The following measures are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors reserved!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Model: VCS 7018-5 Hfjdpfxov N Hc Es Ahnsh Climatic Test Chamber with Humidity, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Technical Data for Temperature Testing: Temperature Range: -70°C to +180°C Temporal tolerance: ± 0.1 to ± 0.5 K Spatial tolerance: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Technical Data for Climatic Testing: Temperature Range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ± 0.1 to ± 0.3 K Temperature deviation (spatial): ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation (temporal): ± 1 to ± 3% r.h. Dew point range: -3 to +94°C Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 10 kW Rated current: 21 A Fuse: 32 A slow-blow, on site Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to changes and errors!) If you have any further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test Chamber Volume: 990 liters Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate (Cooling): 0.2 K/min Temperature Change Rate (Heating): 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Homogeneity: ±0.5 to ±1.0 K Hedpfx Ahjygut Rjnefh Heat Compensation at +20°C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% r. H. Temporal Humidity Deviation: ±1 to ±3% r. H. Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Homogeneity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V±10% 50Hz Rated Power: 2.3 kW Rated Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data, information may vary!) Feel free to contact us by phone for further questions.

Kondisi: sangat baik (bekas), Vötsch Model: VC³ 7018 Vötsch Climate Test Chamber, Air-Cooled Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 4 K/min Temperature change rate: Cooling 3 K/min Climate Testing: +10°C to +95°C Humidity range: 10% to 98% r.h. Hfsdpfx Aox Hg Uujhnoh Temporal temperature deviation: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Overall dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Rated voltage: 400V Rated current: 14 A Rated power: 5.5 kW Heat compensation: 1500 W (at 20+) Weight: approx. 460 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our listed chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. If required, refill with compliant refrigerant according to legal requirements 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical changes and errors in the specifications!) Please feel free to contact us by phone if you have further questions.

Kondisi: baik (bekas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Hedpfxjun Izcs Ahnsfh Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW; Rated current: 21 A Sound level at 1 meter distance (free field measurement): < 69 dB(A) Lateral feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R23 Weight approx. 570 kg For your safety as a buyer, please note the following information! The following measures are taken in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Technical data and information subject to change and error!) For further questions, feel free to contact us by phone.

Kondisi: siap digunakan (bekas), Jouan CR 4 22 centrifuge refrigerated benchtop centrifuge Temperature range: -8°C to 40°C Temperature accuracy: +/- 0.5 °C, adjustable in 1°C increments. Speed: 200 to 8000 rpm Speed accuracy: +/- 10 rpm, adjustable in 10 rpm increments. RCF control range: 10 to 9500g Timer: 1 to 99 minutes You are welcome to arrange a viewing. We can organize cost-effective shipping for you. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used only for identification and description purposes. Hfodpfxevr S S De Ahnjh Deviations from technical specifications and errors in the description may occur and are subject to change.