Gergaji pemangkasan

JRIMAC - Stoll JRIMAC Untertischkappsäge 750

Kondisi: baru, Perlengkapan: pencahayaan, Take your painting process to the next level – with mobile convenience. Mobile paint booths in container design for painting and coating a wide variety of objects. They are specifically engineered for mobility, allowing for easy transport and rapid deployment on different worksites. The cabin is typically equipped with a ventilation system to ensure air quality, integrated lighting, and a filtration system that prevents paint mist from escaping. The ventilation system ensures that vapors and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Mobile paint booths provide a practical and flexible solution for companies that need a relocatable, effective painting system, easily transported from one construction site to the next. Overview of design and features Our mobile 20-foot Sapi painting containers feature a robust steel framework with welded wall and ceiling panels. Inside, we can install specialized equipment such as cranes or lifting devices. The floor is made from checkered steel plate. Both door panels include ventilation grilles fitted with fine-pore filter mats. One panel is designed as an escape door for safety reasons and features a viewing window. It is important to note that these are not simply converted shipping containers—we manufacture all our containers from the ground up, using only the most durable materials that meet all requirements and have been tested and proven for safety. Standard shipping containers would not meet the required safety standards. Paint mist extraction system in the mobile painting container The paint mist extraction wall for overspray separation is installed in front of the rear wall and equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with guide plates, including various hanging and fastening elements for filter installation. On the exterior rear side of the container, a high-performance, ATEX-certified extraction fan with drive motor is installed on a mounting console. Next-generation mobile paint booths: meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU standards. Accommodating modern coatings such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica coatings imposes stringent requirements on existing painting booths. This is why we have developed a new and unique mobile paint booth to support the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Godpsun Shgjfx Adtjil Whether you require dry paint mist separation or wet scrubbing, humidification or air drying, condensation drying using low-temperature techniques or hot air drying, or pre-treatment of workpieces by high-pressure washing with water recirculation, compressed air blasting, or turbine wheel blasting technology, we offer the optimal solution.

Kondisi: diremajakan ulang (bekas), - Year of manufacture: 2007, completely overhauled - BONGIOANNI variable cutting axis system - 5 bar crossover units - 4 log turners - New control unit - Frame and rail system - New drive, nom. 44 kW Gedpfx Ajtta I Eodtoil - New control cabinet/PLC control - Current collector

Kondisi: baru, The purpose of mobile warehouses is to increase the logistical and production capacities of any company by creating new covered areas intended for various logistical solutions, such as permanent or temporary storage of goods, the establishment of new production or service areas, sheltering loading/unloading zones, and the garaging of vehicles and machinery, across all sectors of business operations. Gedpfx Adst Ef T Djtoil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Set for finger jointing in medium and high-volume production. The machine is technically sound and in good condition. The set includes several sets of tools. Gedpelu D Tfsfx Adtoil Features: – Industrial set with a single tenoner. Operator-supervised bundle loading allows processing of lower-grade raw materials as well, – All functions controlled by microprocessors (automatic control), – Bundle rotation after each operation on a rotary table (butt joint) or flipping the bundle over (furniture joint—unique GOMA solution), – The set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specifications: Milling spindle: Ø 50x210 mm Spindle speed: 6,000 rpm Motor: 18.5 kW Tool dimensions: Ø 250x160 mm Saw spindle trues the end grain Special chipper: Ø 300x8 mm Motor: 6 kW / 3,000 rpm Stepless feed table Working width x height: 600 x 30–160 mm Glue nozzle profile according to tool FC-10 PZ6/2 PRESS Specifications: Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 / 7.5 / 10 T Hydraulic power unit: 3 kW / 140 bar

Kondisi: baik (bekas), Gabbiani SA 300 Multirip Saw – Made in Italy TECHNICAL SPECIFICATIONS: cutting width: 300 mm motor power: 40 kW cutting height: 100 mm feed speed: stepless adjustment feed speed range: 8–56 m/min blade diameter: 300 mm spindle diameter: 50 mm bushing diameter: 70 mm 3 upper pressure rollers minimum workpiece length: 700 mm table dimensions: 1750 x 700 mm three rows of pawls Gsdshcwrkepfx Adtjil height from base: 740 mm extraction port diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing Gijdpfoqt Dmyjx Adtol - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2025, Meet the market leader among manufacturers of hydraulic machinery, guillotine shears, and metal cutting guillotines. Discover Prod-Masz! To understand all the advantages of using our hydraulic press brakes and hydraulic sheet metal shears, it is worth starting with a brief introduction to our company history. Prod-Masz is a family-run business that has evolved into both a national and international expert in sheet metal processing. Many years of experience have enabled us to develop a wide range of products. As a result, customers receive comprehensive and proven solutions, along with a satisfaction guarantee. Our press brake bending machines are engineered for industrial applications. For precise bending results, it is essential that all spare parts used in the bending machines are manufactured to the highest quality standards. Every installed spare part is thoroughly inspected, ensuring consistent top-quality performance of our bending machines. Gjdpfx Asci R Exodteil Model: ZGR-3140/1.0 Technical Data: - Maximum working width: 3140 mm - Bending capacity: up to 1.0 mm (steel sheet) - Maximum bending angle: 145 degrees - Upper beam thickness: 20 mm - Cutting with rotary shear across the entire working width - Upper beam adjustable in three positions - Clearance opening: 80 mm - Degree scale - Angle gauge - Depth stops - Weight: approximately 600 kg - Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet) available for an additional €350 - The machine complies with CE regulations and comes with a 12-month warranty. Price: €3,100.00 Delivery costs to Germany: €360.00 Delivery costs to Austria: €360.00 Delivery: weekly Cash payment upon delivery We look forward to hearing from you!

Kondisi: baik (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 21100122-F, 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm - Cutting capacity at 90° (round): 120 mm - or (flat): 105 x 105 mm - or (flat): 180 x 70 mm - Cutting capacity at 45° (round): 110 mm - or (flat): 135 x 60 mm - Mitre adjustment left and right: 45° - Tiltable mitre adjustment of the saw head to the left for bevel cuts - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm Gedpfjwq N Swex Adtsil - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1,730 x D 1,200 mm - Weight approx.: 180 kg

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KME 2/750L, Clamping carriage for saw frame Giodpfxev Umb Eo Adtsl Inspection possible by appointment.

Kondisi: baru, Tahun pembuatan: 2023, Orbital sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thickness for chairs, tables, beds, and related items. The main features of the machine are: frame made of electro-welded steel; rotating disc with 2 counter-rotating sanding belts driven by an electric motor, with a rotating movement around the workpiece; electrical control panel; 2 adjustable worktables (infeed – outfeed); option for mounting 2 automatic workpiece feed units with variable speed via frequency inverter. Gijdeqnufvjpfx Adtsl Sanding belts: 80 x 1260 mm Min./max. workpiece diameter: 10-100 mm (Ø) Min. curvature radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Camam, Comec, OMEF, Brusa di Garboli