Pemegang roda gerinda

JUNG HF 50 / JF 520 / JF 625 Schleifscheibenflansch

Kondisi: baru, Extraction performance at nozzle* (filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or custom colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine work areas | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan included as standard - Adjustable fan speed and air volume - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of airflow capacities available - Can be adapted to pollutant load and airflow requirements - Extensive range of mounting and connection accessories - Quality Made in Germany Bodpjh Rdwxofx Ad Rjlf The ELBARON® filter series has been developed for use in machining processes with pure oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already digitally equipped as standard and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 variants and can be optimally configured in size and performance for your specific application. ELBARON® devices stand out for their long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimal filtration efficiency, maximum service life, and trouble-free operation while maintaining economic efficiency.

Tahun pembuatan: 2007, Kondisi: diremajakan ulang (bekas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in water bath) / 800 kg (out of water bath) Bjdjmmfwujpfx Ad Rslf Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled upon receipt of order. You will receive a 6-month warranty on all machine components. We are also pleased to offer you commissioning and training services.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). Bedpjvz Hq Hefx Ad Rolf - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Bsdpfx Adow U Ry Ns Rolf Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Inspection and cleaning of various accessories Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, de-1 Blsdpfxorwnyvo Ad Ref

Kondisi: baru, Cross table with rotary plate Table length: 430 mm Table width: 240 mm X-axis travel: 225 mm Y-axis travel: 160 mm Table height: 160 mm T-slots: 12 mm Weight: 45 kg Dimensions (L x W x H): 0.6 x 0.45 x 0.2 m Bodpfxoupw T Re Ad Rjlf

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Bodpfxslz Rvls Ad Relf Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1984, Load capacity: max. 300 kg Spool plate diameter: 1,000 mm Flange outer diameter: max. 900 mm Bedpfof S I I Hex Ad Rolf Flange inner diameter: 240 - 560 mm Flange width: max. 180 mm

Kondisi: sangat baik (bekas), 16 shank milling cutters with indexable inserts Manufacturer: Walter Weight: 9.5 kg Bledpfodx D Tvjx Ad Rjf

Kondisi: baru, en-Bernardo-Drill-Grinding-Machine-DG-32-Pro-Specifications Drill Diameter: 2 – 32 mm Point Angle: 90° - 135° Rotational Speed: 4,800 rpm Motor Power: 0.25 kW Voltage: 230 V Bledpfx Adegd H U Us Ref Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of Delivery • Diamond Grinding Wheel SBC • 10 pcs. ER 20 Collets, 3 – 12 mm (3/4/5/6/7/8/9/10/11/12 mm) • 20 pcs. ER 40 Collets, 13 – 32 mm (13/14/15/16/17/18/19/20/21/22/23/24/25/26/27/28/29/30/31/32 mm) • Collet Holders for ER 20 and ER 40 Features • Includes pointing device for improved centering of the drill tip on the workpiece and reduced feed force required • 30 pcs. ER collets included, also suitable for clamping intermediate sizes • Additional station for back grinding the drill cutting edge (relief angle) • Universally adjustable point angle from 90° to 135° • Rotor with precision ball bearings ensures high running smoothness • Fast and precise results thanks to user-friendly operation • Vibration-free running due to high net weight and rubber feet