BHKW bekas

Köhler / Ziegler SY 050 GKT

Tahun pembuatan: 2024, Kondisi: baru, Universal testing machine H 5 TMNI ( L ) 250mm Extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screw spindles, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working space width: 420 mm Max. test stroke without test fixtures, adapters and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test fixtures, adapters and KMZ: 1325 mm Travel speeds: Test speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Fodpfjiq Hxvex Afwjgh Force measurement: Measuring range depending on the force transducer used 0.4 - 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If requested by the customer, a factory or DAkkS calibration can be carried out at the installation site; this service will be charged separately. Crosshead position measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 873 h, kapasitas angkut: 5.000 kg, tinggi angkat: 3.300 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 2.450 mm, lebar kerangka garpu: 1.200 mm, panjang garpu: 2.400 mm, berat kosong: 7.850 kg, jenis penggerak: Diesel, lebar konstruksi: 1.450 mm, Forklift diesel Titik berat beban: 600 Tipe tiang: Duplex Kondisi teknis: baik Ukuran ban depan: 300-15/8.00 Fsdpfx Afevgh U Rjwsgh Ukuran ban belakang: 7.00-12/5.00 Side shifter, katup ke-3, katup ke-4, lampu kerja depan, pemanas, kabin penuh, sertifikat CE, safety light,

Tahun pembuatan: 2025, Kondisi: baru, Complete version of the vertical packaging system featuring auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC with touchscreen operating monitor (available in multiple languages, such as English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, double transport capability, air removal/extraction device (removes air from the bag before sealing, does not create a vacuum), holder for heavy finished bags, Euro hole punch device; suitable for OPP and PE film (PE unit available at extra charge, if required). - VFFS Packaging Machine Specifications: Filling volume: up to 5000ml; Max. film width: 620mm; Bag size min-max: L(100-400)xW(180-300)mm; Max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; Machine dimensions: LxWxH: approx. 1780x1850x1950mm; Weight: 700kg. - Auger Dosing Unit Specifications: Filling capacity up to 50l (hopper); Dosing range: 10-5000g; Max. idle cycle rate: 40 cycles/minute; Accuracy: ±0.3~1.5% (depending on product); 380V, 3kW; dosing unit dimensions (LxWxH): 600x1250x1200mm; Weight: 220kg. Screw conveyor for automatic transport of material to the dosing unit. Vibration motor ensures consistent product flow. Feed hopper with up to 150 liters capacity; size depends on customer-specific final system. - Specifications: Hopper, conveying length, and conveying angle can be customized according to product and customer requirements. Overall dimensions accordingly depend on this. Conveying length: 3~4m; stainless steel 304; conveyance speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; Weight: 130kg – 270kg. Stated specifications may vary. Support rod available optionally. The discharge conveyor features a stainless steel frame. - Specifications: conveyor speed: 30m/min; 220V, 0.55kW; Dimensions (LxWxH): approx. 1850x550x1230mm; Weight: 80kg. Overall system dimensions: approx. L2980xW3650xH2600mm, depending on final configuration. The system must fundamentally be tailored to customer-/product-specific requirements; module and machine specifications may therefore vary. Key components: SIEMENS color touchscreen display, SIEMENS PLC control unit, SIEMENS servo motor, AIRTAC cylinders, AIRTAC solenoid valves, OMRON relays, SIEMENS servo motor for film transport. Fsdpfx Asv Nmk Aefwogh The machine/system is also available in additional versions for different packaging sizes and packaging speeds. Please note that our new prices are frequently below common used machine prices. Feel free to make an inquiry specifying your packaging project. - Typically, 30-50 different new machines are always in stock and immediately available. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, warna: putih, daya: 550 kW (747,79 hp), tegangan keluaran: 690 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 550 kW (747,79 hp), produsen motor: Caterpillar, jenis pendinginan: air, 3x genset kelautan bersertifikat Lloyds, kondisi baru. Semua dokumen Lloyds yang dibutuhkan untuk pendaftaran kelas tersedia. Genset Cat C32 / 550eKW / 690 volt / IMO II. Fgodpfxox Ec D To Afwoh

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), 600 KG 10 BAR Fgodjxy Ikbjpfx Afwoh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fuel: natural gas (NG), Engine: HMG, Space heating unit with CHP: yes, Condensing boiler: no, Auxiliary heater: no, Low-temperature boiler: no, B11 boiler: no, Combination unit: no, Rated heat input P: 88 kW, Annual efficiency of space heating system η: 136%, Energy efficiency class: A++, Usable heat output at rated heat input with auxiliary heater off/on: 87.9 kW, Thermal efficiency at rated heat input with auxiliary heater off/on: 57.5%, Electrical efficiency at heat output of space heating unit with CHP with auxiliary heater off/on: 33.5%, Auxiliary power consumption at full/partial load el: 1.132 kW, Standby power consumption P SB: 0.06 kW, Standby heat loss P stby: 0.442 kW, Annual energy consumption Q HE: 1345 kWh, Sound power level indoors L WA: 72 dB, Operating hours: 42,892 h. Water was detected in the oil circuit, the unit has an oil-related fault even though there is sufficient oil present, it also shuts down with the message 'Engine too hot'. The control unit was overhauled by the manufacturer in 2024. Regular maintenance intervals were observed for oil changes, spark plugs, valves, etc. Documentation available. Fsdpfx Afsxc Ni Rewegh

Tahun pembuatan: 2004, Kondisi: baik (bekas), A well-maintained used double-mitre cold circular saw from KASTO, Model: "KASTOdisc A10" - Fully automatic operation Fgsdskfvhkjpfx Afwoh - Single cut mode - Hydraulic clamping vices - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter: 350 mm Cutting capacity: Round 90°/45°: 100/100 mm Square 90°/45°: 100x100/100x100 mm Rectangular 90°/45°: 170x100/130x100 mm Shortest remnant length in single cut at 90°: 30 mm Shortest remnant length in automatic mode at 90°: 260 mm Working height: 950 mm Dimensions (W x D x H): 1530 x 1348 x 1890 mm Weight: 980 kg For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change and errors excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 2.900 kg, frekuensi input: 50 Hz, daya nominal: 1.250 kW (1.699,52 hp), Satu unit transformator oli bekas, belitan aluminium TRANSFIX, pendinginan ONAN. 1250 kVA, 20.000 Volt/20 kV. Tahun pembuatan 1999, kondisi sangat baik. Selalu tersedia. Untuk informasi lebih lanjut, silakan hubungi kami. Fgsdpfszbyq Rex Afweh

Kondisi: bekas, Tahun pembuatan: 2004, en-GB Fgsdpeu Nvclefx Afweh

Kondisi: sangat baik (bekas), Optimizing cross-cut system GreCon Type 2004 with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec Saw motor: 5.5 kW Saw spindle control: Pneumatic Chain drive: Servo motor Min. working width: 40 mm Fsdpfx Aen Hwl Asfwjgh Min. infeed length: 500 mm Net weight: approx. 1,800 kg Has been completely overhauled and not used since Location: Austria, near Ried im Innkreis