VAKUUMOFEN

SCHMETZ IKU 140/2.

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA Pgedpfx Aeiryyaeqvst System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in vacuum Temperature control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of stabilization period Control voltage: 230 VAC / 24 VDC Usable chamber dimensions: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold furnace): < 5 * 10-5 mbar with clean, dry furnace Footprint: 900 x 1900 x 3000 mm Total weight: approx. 1500 kg Sound pressure level: < 70 dB We do not guarantee the accuracy, completeness, or currentness of the provided information.

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Pgjdpot Hwt Sofx Aqvst Feed rate: 0.9 - 2,000 mm/min Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more

Tahun pembuatan: 2015, Kondisi: baru, shaft furnace clear internal height: 1100 mm clear internal diameter: 790 mm external diameter: 1560 mm external height (without lid): 1480 mm Pgedpscdi D Dofx Aqvst external height (with lid): 2300 mm electric heating: 40 kW circulation fan: 2.2 kW three-phase connection: 400 V, 50 Hz maximum temperature: 750°C

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Pgedpfx Aqoy Tmhzovjt Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader with numerically controlled Z-axis - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, panjang total: 9.800 mm, lebar total: 4.000 mm, panjang pemakanan sumbu X: 3.500 mm, panjang umpan sumbu Y: 1.100 mm, panjang umpan sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 30.000 m/menit, laju pemakanan sumbu Z: 5.000 m/menit, panjang meja: 3.000 mm, beban meja: 6.000 kg, lebar meja: 1.200 mm, daya: 22 kW (29,91 hp), 9597 Pjdpfxjy En Dns Aqvjgt

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm Pgsdpfx Aqov Ig Avjvjt - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Tahun pembuatan: 2024, Kondisi: baru, Universal testing machine H 5 TMNI ( L ) 250mm Extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screw spindles, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Pgodpfx Aqsiq Hxvevst Working space width: 420 mm Max. test stroke without test fixtures, adapters and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test fixtures, adapters and KMZ: 1325 mm Travel speeds: Test speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force transducer used 0.4 - 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If requested by the customer, a factory or DAkkS calibration can be carried out at the installation site; this service will be charged separately. Crosshead position measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Kondisi: baru, Tahun pembuatan: 2026, en1 Pgedpfx Aqewmwwmsvet

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 1988, nomor mesin/kendaraan: 1116/87, MANUFACTURER: ELTERMA / IPSEN MODEL: VDFC-413 Pgedpfx Asm E Tvhsqvot DESCRIPTION: Vacuum tempering furnace YEAR: 1988 CONDITION: New, unused; requires a new control cabinet Charge dimensions: 610x900x500 mm Maximum load: 500 kg Working temperature: 150-750ºC Approximate chamber heating time up to 550ºC: 30 minutes

Tahun pembuatan: 1996, Kondisi: diremajakan ulang (bekas), Molino clasificador usado Hosokawa Alpine Zirkoplex ZPS 315 classifier mill Psdpskqlf Sjfx Aqvsgt A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components exclusively Original manufacturer's warranty Guaranteed spare parts supply by the manufacturer Reduced delivery times Prior to delivery, the machine is inspected, all wear parts are checked and replaced if necessary, and the machine is customized to your specific requirements Option to supply any required peripherals or retrofit to your existing production plant We are also interested in repurchasing unused HOSOKAWA ALPINE equipment The Hosokawa Alpine Zirkoplex ZPS classifier mill is ideal for fine grinding of various dry materials with precise control of the cut point or maximum particle size, thanks to the integrated classifier wheel design. It can be used to pulverize a variety of products across different industries where micronization is required, such as minerals, chemicals, food, pharmaceuticals, and more. Grinding occurs at the bottom of the mill where a rotating plate equipped with grinding tools (hammers or pins) impacts and accelerates the particles against the internal grinding track (liner) to break them down. In the same chamber, airflow carries the fine product to the classifier wheel, where oversized particles are rejected and sent back for further grinding, while fine particles pass through to the next step, typically filtration. The necessary process air means only minimal temperature increase is expected during grinding, compared to other size reduction technologies. The final particle size distribution can be easily adjusted by changing various parameters, such as the rotor speed, classifier wheel speed, air volume, feed rate, etc. Material of construction: stainless steel for product-contact parts No wear protection Equipment without explosion protection (NPSR), not ATEX-compliant Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, one set of internal grinding tools, and installation base/table.