Sander sabuk lebar

Kündig Enorm TrioTop 1350

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) Giedpfx Ajrmucxedtol - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Complete plywood panel production line including: - 1 BUERKLE lay-up line, year 1991, with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal conveyor + 1 OLM cross-feed conveyor + 1 assembly table. - 1 press loading rack with 10 positions. Gjdpfsul Uizsx Adtsil - 1 BVH 10-level hot press with oil-heated platens: • Platen size: 3700 x 1900 mm • Platen thickness: 40 mm • Daylight opening between platens: 75 mm • 1 central cylinder, diameter 700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side discharge pushers on an elevating table. Line currently in operation, available second half of 2025.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Kufennagelmaschine P + K Palettennagelmaschine P+K SNM-III-24-1250 Intermediate drive with branding iron Positioning table Gantry stacker Giedpfsuzh Anjx Adtol Pallet size 600x800 - 1200x1400 mm

Kondisi: bekas, Planing and moulding machine Weinig Hydromat 2000 for four-sided planing and profiling of timber with grooved bed, without soundproof enclosure. Spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Spindle 5: Top / 15 kW Working width: 230 mm Working height: 160 mm Gedpfsrmvhfsx Adtsil Spindle diameter: 50 mm

Kondisi: bekas, Tahun pembuatan: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software Panel thickness: 8 - 60 mm PVC/ABS edge thickness: 3 mm Feed speed: up to 25 m/min (20 m/min with corner rounding) Giedpfxovqbh Ej Adtjl Electronically adjustable working height via CNC Motorized, rubber-coated pressure belt with superior hold Panel support guide and facilitation for introducing small panels Monitored infeed guide Anti-adhesive unit Rectifier unit with two motors, each 3 kW, 9000 rpm ball bearings Glue application system for PUR adhesive with pre-melter and adhesive tank Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC Trimming unit with 2 motors (automatic tilt adjustment?) Overlap cutting unit with 2 motors Corner rounding unit with 2 multifunctional motors (trimmer + corner rounder) with CNC control Edge scraper unit Glue scraper unit Buffing unit Anti-adhesive unit TECHNICAL DETAILS MUST BE VERIFIED

Kondisi: diremajakan ulang (bekas),

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Gijdpfx Adjfxpbmstel

Tahun pembuatan: 1970, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Stenner RESAW VHL 48 Hersteller: Stenner, Großbritannien Serien-Nr.: J2103 Baujahr: 1970 (Originalfotos folgen in Kürze) Hauptabmessungen und technische Daten: - Durchmesser der Bandscheiben: 48" = 1.220 mm - Breite der Bandscheibenauflage – Standard: 5" (127 mm) - Breite der Bandscheibenauflage – optional: 5 1/2" (140 mm) - Maximale Schnittbreite – Standard: 5 1/2" (140 mm) - Maximale Schnittbreite – optional: 6" (150 mm) - Minimale Sägenlänge: 25'' 8" (782 mm) - Max. Höhe des oberen Sägenführers über Tisch: 28" (710 mm) - Tischhöhe über Boden: 31 1/2" (800 mm) - Gesamthöhe über Boden: 108,9" (2.770 mm) - Gesamtbreite: 96,9" (2.460 mm) - Umlaufgeschwindigkeit der Bandscheiben: 8.000 fpm (2.440 m/min) - Leistungsspektrum: bis 30 kW - Größe der Schnell- und Lose-Riemenscheiben: 20" x 6 1/2" - Vorschubgeschwindigkeiten, Standard: 0–140 fpm (0–42,6 m/min) - Versandgewicht: 3.583 kg Beschreibung: Die VHL 48 ist ein Bandbesäumer moderner Bauart, entwickelt auf Grundlage umfangreicher Anwendererfahrungen. Sie vereint hohe Schnittgenauigkeit und schnelle Bearbeitung mit einfacher Bedienung, geringerer Bedienermüdung, niedrigen Wartungskosten und erhöhten Sicherheitsstandards. Diese Faktoren führen zu einem besonders effizienten Betrieb. Die Maschine ist vorwiegend für Hobelwerke und Tischlereien konstruiert. Das schmale Bandsägeblatt sorgt für eine hohe Holzausbeute durch einen äußerst geringen Sägeschnittverlust. Im Vergleich zu einer Kreissägestation mit Schwenkarm arbeitet die VHL schneller, erzeugt weniger Verschnitt und benötigt weniger Energie bei vergleichbaren Anwendungen. Allgemeines: Giedpfx Adovuhumetol Die VHL wird ausschließlich als Linksmaschine gefertigt, d. h. die Bandscheiben drehen sich gegen den Uhrzeigersinn, betrachtet in Vorschubrichtung. Die Antriebsseite ist normalerweise auf eine Sägebandgeschwindigkeit von 8.000 Fuß/min (2.440 m/min) ausgelegt. Hauptantrieb: Der Hauptantrieb erfolgt über die untere Bandscheibenspindel, die sowohl für Keilriemen als auch Flachriemen (Schnell-/Lose-Riemenscheiben) vorbereitet ist – passend zur vorgesehenen Antriebseinheit. Komplett angetriebene Elektromotorlösungen bis 40 PS für die gängigen Stromversorgungen sind lieferbar; diese beinhalten zwei Keilriemenscheiben, passenden Keilriemensatz, Riemenschutz, Motor mit Schiebeschienen, Anlasser sowie einen Haupt-Not-Aus-Schalter, der unmittelbar am Maschinenfuß in Bedienernähe angebracht ist. Horizontale Rollen: Die horizontalen Rollen haben einen Durchmesser von 152 mm und erstrecken sich auf der Anschlagseite über die volle Öffnung sowie auf der offenen Seite 152 mm über den Tisch hinaus. Sie sind serienmäßig freilaufende Leerlaufrollen. Optional können hydraulisch angetriebene Rollen mitgeliefert oder nachgerüstet werden. In diesem Fall werden die Rollen synchron mit den Hauptvorschubwalzen durch einen separaten Motor angetrieben. Die Anordnung ermöglicht, dass die auf der offenen Seite der Auslaufseite befindliche Rolle entgegengesetzt rotiert, um das Holz komfortabel zum Bediener zurückzuführen. Die vor der Bandsäge befindliche Rolle ist seitlich verschiebbar, um einen schnellen Sägeblattwechsel zu ermöglichen.

Kondisi: bekas, 100 m³ buffer tank made of steel, horizontal, mounted in a frame Volume: 100,000 l Dimensions (LxWxH): 15,400 mm x 3,500 mm x 3,500 mm Insulation: 100 mm mineral wool, all around Wall construction: insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: 1 x manhole for inspection/maintenance 1 x connection nozzle (flow and return (boiler)) 1 x connection nozzle (flow and return (consumer)) 2 x PT 100 temperature sensors Gedpfxotv Rp Hj Adtsil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, We offer you: Deburring machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical data and features: - Abrasive belt change on the left machine side - Tool set - Digital thickness indicator - Material feed at the infeed too strong - Electropneumatic control of the oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on or off - Machine with head adjustment (fixed working height 900 mm) - Lift system on 4 columns (spindle drive) with chain drive - Table extension at front and rear with one roller each - Industry 4.0 (LAN) package with LAN network connection - Working width: 1,350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height: 160 mm - Internal LED lighting - Electronic belt control for the longitudinal units - Calibration-grinding unit with sanding roller diameter 190 mm, belt length 2,620 mm - Electromechanical grit setting - The speed of the abrasive belt can be set via frequency converter - V-Spin unit with 15-disc grinding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row, counter-rotating. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removal of slag or oxides. - 16 support discs for V-Spin units, 80 mm diameter Scotchbrite + abrasive grain size 80 - 16 support discs for V-Spin unit, 80 mm diameter Tampico + abrasive grain size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads; each head is fitted with 3 pads for rotating sanding brushes, diameter 123 mm - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5–7 m/min Conveyor belt made of HYPALON rubber, heat and oil resistant, hardness 60 Shore, with smooth surface - Belt cleaning blower for the conveyor carpet incl. extraction - IPC MONITOR 15" touch screen control for machine operation, up to max. 10 processing units The control system manages the following processes: - Start sequence of selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness controller - Acoustic and visual signals when the machine starts up - Operating hours counter Giedev Hxrgjpfx Adtjl - Automatic control of feed speed according to machining performance (expressed in sqm). This allows for longer abrasive belt life based on the statistics. The machine is in very good condition and comes with 2 Euro pallets of new abrasive belts. Accessories, depicted tools and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and details as well as prior sale are subject to change and error!