Oil-water separator without filter element

Kaeser Aquamat CF75

Tahun pembuatan: 2017, Kondisi: baik (bekas), nomor mesin/kendaraan: 4066, The cost-effective condensate drainage solution for your compressor. The oil is separated from the water using a filter set. The filter set is included in the scope of delivery. The treated water (only in combination with the filter set) meets the requirements for discharge into the sewer system. Warranty and guarantee are excluded in this listing. Dkjdpfx Aajqmmvcjvjw Price on request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 690924, Connection rating 380V 1.84kW Dkodpfx Ash U Damsavew Speed 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing 640 mm Spindle rotation: 11 right-handed, 10 left-handed, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Please note: We are unable to respond to inquiries without complete contact details.

Tahun pembuatan: 2017, Kondisi: baik (bekas), nomor mesin/kendaraan: 4068, The cost-effective condensate discharge solution for your compressor. The oil is separated from the water using a filter set. The filter set is included in the scope of delivery. The treated water (only in conjunction with the filter set) meets the requirements for discharge into the sewage system. Warranty and liability are excluded in this listing. Price on request. Dkodpfx Aoqmmvrjavew

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), jenis pendinginan: udara, Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Dedpfx Ajvllxdsavskw Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically tested and is fully functional.

Kondisi: baru, Tahun pembuatan: 2025, Dry rotary vane vacuum pump. Available in stock. Completely new pump. Comes with a 12-month warranty. Nominal flow rate: 25 m3/h at 50Hz. Ultimate vacuum: 150 mbar abs. If you have any questions, please contact us. Dkjdeftzpvepfx Aavjw

Tahun pembuatan: 2009, Kondisi: baik (bekas), • Fully automatic • Max. package height (mm): 650 Dsdpfxjpu Anms Aavokw • Min. package height (mm): 15 • Max. package width (mm): 1250 • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Tahun pembuatan: 1990, Kondisi: baik (bekas), Compressor unit with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Height: 1,000 mm Capacity: 1.5 m³/min Dkjdpfsinur Aex Aavew Power: 11 kW

Kondisi: bekas, Unit pendingin, pendingin air sirkulasi, pendingin air, chiller O. Hellwig Tahun pembuatan: sekitar 1995 Dedspu R Ncopfx Aavskw Kapasitas pendinginan: sekitar 8 kW Daya nominal unit pendingin: 3 kW Refrigeran: R422D Kapasitas tangki air: sekitar 35 liter Kapasitas aliran pompa sirkulasi: 40 liter/menit Daya pompa: 0,63 kW Koneksi air: 1/2 inci Koneksi listrik: 380 Volt, 50 Hz - Pengaturan suhu melalui potensiometer putar Dimensi (P x L x T): 1100 x 750 x 140 mm Berat: 285 kg

Kondisi: baru, Tahun pembuatan: 2025, Sistem pendingin efisien dengan R290 – pendingin udara, andal, dan ramah lingkungan. Model kami mencakup kapasitas 20 hingga 800 kW dan menawarkan opsi fleksibel dengan atau tanpa free cooling. Keunggulan: Pendingin ramah lingkungan R290 dengan potensi pemanasan global rendah Pendingin udara, pompa internal, dan tangki Opsi: dengan free cooling—memanfaatkan udara luar untuk pendinginan tambahan, mengurangi konsumsi listrik terutama di bulan-bulan dingin Skalabilitas dari 20 hingga 800 kW sesuai kebutuhan Anda Dodpfx Aaofqllwovekw Sistem kontrol canggih Konsultasi, perencanaan, dan pengukuran khusus Waktu pengiriman tergantung pada konfigurasi dan perlengkapan Operasi berkelanjutan berkat emisi CO2 rendah dan biaya operasi yang rendah Kami siap memberikan konsultasi untuk menentukan versi yang paling sesuai dengan kebutuhan Anda.

Kondisi: baru, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table size: 1100 x 735 mm Sliding table: 3200 x 400 mm Ripping length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Dsdpfsd N S T Dsx Aavekw Extraction port Ø: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor intake power S6 40%: 7.5 kW (10.0 HP) Scoring unit motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electrically adjustable saw blade height • Digital cutting height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal stop flaps • Support table with roller • Push stick • Independent scoring unit with dedicated motor • Operating tools Features • Powerful main drive motor (5.5 kW) with high torque, optimized for top cutting performance • Easy-running double roller carriage with central and end-position locking for precise cuts • Max. saw blade diameter 400 mm for cutting heights up to 125 mm • Support table with roller for easier handling of large workpieces • Fold-down rip fence with micrometric fine adjustment (advantage for large panels) • Standard independently driven scoring unit (motor power 0.75 kW) • Rigid saw assembly with double-sided guided tilt elements in cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously tiltable from 90° to 45°