Pemisah minyak-air dengan elemen filter

Kaeser Aquamat CF75

Tahun pembuatan: 2016, Kondisi: baik (bekas), nomor mesin/kendaraan: 3385, The cost-effective discharge of condensate for your compressor. The oil is separated from the water by means of a filter set (PLEASE NOTE: The filter set is not included in the scope of delivery). The purified water (only when used in conjunction with the filter set) complies with regulations for sewage discharge. Warranty and guarantee are excluded from this listing. Price on request. Fgodoqmmkkepfx Agdji

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), jenis pendinginan: udara, Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Fsdpfx Agsvllxdedsgi Refrigerant: R404 Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically tested and is fully functional.

Tahun pembuatan: 2017, Kondisi: baik (bekas), nomor mesin/kendaraan: 4068, The cost-effective condensate discharge solution for your compressor. The oil is separated from the water using a filter set. The filter set is included in the scope of delivery. The treated water (only in conjunction with the filter set) meets the requirements for discharge into the sewage system. Warranty and liability are excluded in this listing. Price on request. Fjdpfjqmmvrox Agdjgi

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Fgodor A Hcbopfx Agdsi Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Tahun pembuatan: 1990, Kondisi: baik (bekas), Compressor unit with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Height: 1,000 mm Capacity: 1.5 m³/min Fedpfx Agsinur Aedogi Power: 11 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 2.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G3158-0645, de Fgodpow Dcdyjfx Agdsi

Kondisi: bekas, Unit pendingin, pendingin air sirkulasi, pendingin air, chiller O. Hellwig Tahun pembuatan: sekitar 1995 Kapasitas pendinginan: sekitar 8 kW Daya nominal unit pendingin: 3 kW Refrigeran: R422D Kapasitas tangki air: sekitar 35 liter Kapasitas aliran pompa sirkulasi: 40 liter/menit Fsdpfx Aopu R Ncjgdogi Daya pompa: 0,63 kW Koneksi air: 1/2 inci Koneksi listrik: 380 Volt, 50 Hz - Pengaturan suhu melalui potensiometer putar Dimensi (P x L x T): 1100 x 750 x 140 mm Berat: 285 kg

Tahun pembuatan: 1988, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 3284, • Protective panels surrounding the machine. Minimum material thickness: 0.65 mm Maximum material thickness: 2 mm Fgedpfx Aehbu E Hegdei Technical data: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth, negative/positive: 6/20 mm (22 mm negative available on request) Top heater max.: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Air consumption (depending on production): max. 1,250 l/min Maximum water flow rate: 1.0 m3/h COMPACT AND ROBUST – designed for high continuous output and user-friendly operation. Ergonomically optimized (e.g. product removal height 1,300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, i.e. optimum material utilization for both rectangular and round lids (heater replacement is straightforward). PRECISION – Accurate forming table guidance via guide columns with linear ball bearings. The reliable guarantee for precision. OPTIMUM CUTTING ACCURACY AT HIGH OUTPUT Cam-controlled functional processes ensure maximum repeat accuracy.

Kondisi: baru, Tahun pembuatan: 2025, Sistem pendingin efisien dengan R290 – pendingin udara, andal, dan ramah lingkungan. Model kami mencakup kapasitas 20 hingga 800 kW dan menawarkan opsi fleksibel dengan atau tanpa free cooling. Keunggulan: Pendingin ramah lingkungan R290 dengan potensi pemanasan global rendah Pendingin udara, pompa internal, dan tangki Opsi: dengan free cooling—memanfaatkan udara luar untuk pendinginan tambahan, mengurangi konsumsi listrik terutama di bulan-bulan dingin Fgedpsfqllwefx Agdsi Skalabilitas dari 20 hingga 800 kW sesuai kebutuhan Anda Sistem kontrol canggih Konsultasi, perencanaan, dan pengukuran khusus Waktu pengiriman tergantung pada konfigurasi dan perlengkapan Operasi berkelanjutan berkat emisi CO2 rendah dan biaya operasi yang rendah Kami siap memberikan konsultasi untuk menentukan versi yang paling sesuai dengan kebutuhan Anda.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Perlengkapan: Pelat tipe tersedia, Volumetric Dosing Systems – Granulate, Powder, and Regrind We offer a range of fully operational volumetric dosing systems, ideally suited for conveying granulate, powder, and regrind materials. • Various models available: We have different dosing units in stock, which can be adapted to suit your material and application requirements. Fgjdpfx Asvmylzogdsi • Testing option: Upon request, we can test the dosing units with your specific material to ensure they meet your requirements. • Reliable performance: All units have been tested and are ready for immediate operation. Contact us, and we will help you find the right dosing system for your needs. We are happy to answer any questions or provide advice!