Minyak / air pemisah Aquamat CF 38

KAESER CF38

Tahun pembuatan: 2013, Kondisi: baik (bekas), nomor mesin/kendaraan: 3063, The cost-effective drainage solution for condensate from your compressor. The oil is separated from the water using a filter set. The filter set is included in the scope of delivery. The purified water (only when used with the filter set) is approved for direct discharge into the sewage system. Warranty and liability are excluded in this listing. Ljdsqmmffjpfx Afieri Price upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Amada HFE M2 220t 4m, 8-Achsen Abkantpresse Baujahr: 2012 Presskraft: 220 Tonnen Max. Biegelänge: 4.280 mm Hub: 200 mm Anfahrgeschwindigkeit: 1 - 100 mm/s Biegeschwindigkeit: 1 - 10 mm/s Rücklaufgeschwindigkeit: 1 - 100 mm/s Ölvolumen: 195 l Motorleistung: Gewicht: 17.450 kg Abmessungen: Maschinenlänge: 5.070 mm Maschinentiefe: 2.075 mm Maschinenhöhe: 3.085 mm Ständerabstand: 3.760 mm Oberwangenbreite: 180 mm Tischhöhe: 960 mm Gesamthöhe offen: 470 mm Lsdpov S U Izofx Afijri Ausladung: 420 mm

Tahun pembuatan: 2017, Kondisi: baik (bekas), nomor mesin/kendaraan: 4789, The cost-effective solution for condensate drainage for your compressor. The oil is separated from the water by means of a filter set (PLEASE NOTE: the filter set is not included in the scope of delivery). The purified water (only when used in combination with the filter set) meets the requirements for sewer discharge approval. Warranty and guarantee are excluded from this listing. Lodpfxeqmmcgs Afiori Price on request.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, jam operasional: 15.996 h, berat keseluruhan: 6.750 kg, tegangan masuk: 400 V, en-001 Lrjdpotwliwsfx Afioi

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement Lrodpfsu Rptyjx Afiei at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: baru, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Welding Table / Perforated Table: Hole diameter: 28 mm The table is made from 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels: 165 mm Lredpfx Aspk Iv Ujfisi Height adjustable from approx. 840 - 890 mm Underside ribbed for reinforcement. Including floor bearing Accessories optional!! Surface flatness: 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 11.574 h, jarak pergerakan sumbu X: 1.525 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 625 mm, tinggi total: 3.235 mm, berat keseluruhan: 13.500 kg, panjang produk (maks.): 5.000 mm, DOOSAN MYNX 7500 3-sumbu ini diproduksi pada tahun 2020 dan dilengkapi dengan kontrol Heidenhain TNC 620 serta probe pengukur TS 460. Dimensi meja kerja adalah 1600 mm x 750 mm dengan kecepatan spindle maksimum 12.000 rpm. Dengan ukuran 5000 × 4050 × 3235 mm dan berat 13.500 kg, jangan lewatkan kesempatan untuk memiliki pusat pemesinan vertikal DOOSAN MYNX 7500 ini. Hubungi kami untuk informasi lebih lanjut. Ledpfex U Dtwsx Afiori • Panjang meja: 1600 mm • Lebar meja: 750 mm • Taper spindle: ISO 40 double contact • Kecepatan maksimum spindle: 12.000 rpm Dimensi Kedalaman mesin: 4050 mm

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 1.730 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 580 kg, panjang total: 1.335 mm, lebar total: 750 mm, tinggi total: 1.880 mm, tekanan (maks.): 11 batang, suhu lingkungan (min.): 3 °C, suhu lingkungan (maks.): 45 °C, tingkat kebisingan: 66 dB, jenis perlindungan (kode IP): IP55, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Ledpfx Afoxnnd Dsijri Year of manufacture: 2020 Condition: Very good, used Operating Hours: 6000 h Load Hours: 1730 h Next Maintenance in: 2589 h Technical Data Pressure: 11 bar Effective Delivery Rate: 1.67 m³/min Rated Motor Power: 11 kW Motor Protection Class: IP 55 Power Supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1335 x 1880 mm Weight: 580 kg Air Receiver: 350 l Compressed Air Connection: G 1 Sound Pressure Level: 66 dB(A) Refrigeration Dryer Power Consumption: 0.49 kW Pressure Dew Point: 3 °C Pressure Drop: 0.06 bar Refrigerant: R 513a Energy Saving Control: Yes Electronic Condensate Drain: Eco-Drain Electrical Equipment: EN 60204-1 compliant Scope of Delivery: – Complete original documentation – RFID Cards (2x) – 5m Supply Cable with 32A Plug

Kondisi: baru, Lifting capacity in kg: 1,000 kg Reach: 4,000 mm Height: 3,000 mm (underside of jib) Total column height: 3,790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Lredpfx Aexak Hxsfiei Description: - Festoon cable system - Drag cable, cable sag approx. 800 mm - Floor-controlled operation via pendant controller Includes: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-fall - Painted in RAL 5017 traffic blue - Lifting capacity: 1 t - Hook path: 3,000 mm - Maximum hook position: 2,442 mm - Calculation basis: FEM 9.901 - Mechanism group: 2m / M5 - Lifting, 2-stage (pole-changeable): 1.3 / 5 m/min - Lifting power: 0.22 / 0.9 kW - Duty cycle: 60% ED - Switching frequency: 360 cycles/hour Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set), size LS 200 - Comprising 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation mounting, incl. grouting accessories For the alignment of the slewing jib crane, an assembly gap between the base of the column and the building floor must be provided. This assembly gap is to be grouted by the customer after approx. 4 weeks of crane operation. The illustration shows a similar crane system.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 2.850 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: SIEMENS, tinggi total: 2.985 mm, berat keseluruhan: 5.000 kg, jumlah slot dalam magazin alat: 30, berat alat: 8.000 g, jumlah sumbu: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It is equipped with a SIEMENS 828 D CNC control and features an X-axis travel of 800 mm, a Y-axis travel of 450 mm, and a Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. The machine comes with a 30-position tool magazine and additional equipment such as a chip conveyor and an electronic handwheel. Please contact us for further information about this machine. Additional equipment • Electronic handwheel Lrjdpox D E H Iofx Afiji • Chip conveyor • Oil skimmer • Coolant flushing gun • 2 x hydraulic vices • 25 x BT40 tool holders Machine advantages Technical advantages • Table dimensions: 1000 x 450 mm • Distance spindle nose to table surface: 150 - 775 mm • Max. tool diameter with free adjacent pockets: 125 mm • Max. tool diameter with occupied adjacent pockets: 80 mm Additional information Machine still under power Dimensions Machine depth: 2158 mm