Kompresor sekrup

KAESER SX6TA5-180

Kondisi: baru, Tahun pembuatan: 2025, The XTON Smart Cleaner SC1000™ Automatic Basket Cleaning System is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in a variety of industries and in the automotive sector. The cleaning unit is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is maximised by our proprietary XPOWER Active Cleaner BA fluid, which, combined with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed circuit at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-litre tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, as well as safe and convenient operation. The cleaning system is engineered for the automatic removal of contamination from surfaces made of cast iron, aluminium, and steel. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with 100 cm diameter Hfjdpfx Aaju R Urhebsf - Heated tank with 300-litre capacity - Dual liquid filtration system - Level and temperature sensors - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-litre starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Basket load capacity: 300 kg - Adjustable working time: 0 - 99 min - Wash/liquid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Degree of protection: IP 54 - Declaration of conformity: CE

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Hfedpewp D Nbsfx Aabjf Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, dehu1930pro Hfodpjw Rdl Djfx Aabjf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 880 mm, jarak gerak sumbu Z: 800 mm, tinggi benda kerja (maks.): 1.230 mm, diameter benda kerja (maks.): 1.250 mm, kecepatan spindel (min.): 18.000 rpm, kecepatan spindel (maks.): 18.000 rpm, Kontrol Heidenhain iTNC 530 Penukar alat 60 posisi Kepala otomatis +180/-7° tanpa langkah HSK A63 Jumlah pallet: 2 buah Hedow Ngipopfx Aaboff Ukuran pallet: 1000*800 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Deckel Maho DMU 80 P-Hi Dyn Pusat Pemesinan CNC 5 Sumbu Tahun pembuatan: 2002 Kontrol: Heidenhain 430 Sumbu X: 800 mm Sumbu Y: 700 mm Sumbu Z: 600 mm Sumbu B: Kepala frais putar otomatis Sumbu C: Meja putar NC: 900x630 mm Berat benda kerja: 800 kg Hfsdpfx Aaex Dlf Robjf Spindle: SK40 Penukar alat: 60 posisi Aksesori: Konveyor serpihan Pendinginan internal 40 bar Handwheel Probe Heidenhain TS 642

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Hjdpeu Rptyofx Aabeff Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: baik (bekas), de-DE: Traypacker / Wrap-Around-Packer Trays und Wrap-Around-Kartons Hfedpsfxypijfx Aabef Minimale Verpackungsgröße L x B x H = 190 x 140 x 80 mm Maximale Verpackungsgröße L x B x H = 460 x 350 x 250 mm 4-bahnige Maschine. Hotmelt-Maschine wurde 2018 überholt. Siemens S7-PLC-gesteuert. Einfacher Formatwechsel. Verkauf im Ist-Zustand oder kundenspezifisch angepasst.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, DE001 Hfsdpfxev Ild Ss Aabef

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: SIEMENS, kecepatan spindel (maks.): 24.000 rpm, daya motor spindle: 35.000 W, jumlah sumbu: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with an X-axis travel of 750 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of 24,000 rpm and a tool magazine with a capacity of 120 positions. It also includes a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, the DMG DECKEL MAHO DMU 70 EVO Linear we offer for sale is an excellent choice. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping area 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 l • Probe • Chip conveyor • Electronic handwheel (remote control) • DMG PH 150 L8 pallet changer system, 8 stations (pallets not included) Technical Specification Hjdsymcvmjpfx Aaboff Taper size HSK 63

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, suhu: 60 °C, kapasitas angkut: 250 kg, SUMMA DC3/OSK rotary basket – rotary drum cleaning system, carousel degreasing unit with dryer The chamber rotation machine from the Czech manufacturer operates on a pressure spray principle. The degreasing system offers three surface cleaning combinations and is suitable for surface degreasing of a wide variety of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770 x 500 mm Max. workpiece weight: 250 kg Electrical power: 23 kW Hsdpfjwty H Dsx Aabsff Bath temperature: max. 60 °C Air temperature: max. 120 °C Bath heating (rinsing): 12/6 kW Hot air drying: 13.5 kW Aerosol pressure: 0.28 MPa Pump capacity: 70 litres/minute Machine weight: 520 kg Machine dimensions: 1800 x 1800 mm Height: 1500 mm Do you need further information? We are happy to assist you! Please contact us via the contact form or give us a call. This listing was automatically translated. Translation errors may be possible.