Tekan

Kallesoe LV5019 + KL20

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood Bodpow Sy T Hofx Aa Teld System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: sangat baik (bekas), Independent machine – universal machine (first & second position in a production line) Electronic control – EasyLing programmer Safe and soundproof enclosure No. 3+3 vertical columns for supporting the processing units Bsdpfx Aewhmdfea Teld Min. usable working width (mm): 240 Max. usable working width (mm): 3,100 Min. usable working thickness (mm): 3 Max. usable working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), infinitely variable (m/min): 4 – 24 Total power No. 4 processing units (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0–90°

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Band Saw K-tech DG 50/33 HA-I - 2-column miter band saw - Robust, yet easy to operate - Material height sensor (automatic cut start recognition) - Smooth running due to inclined cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (can be disinfected) Bodpefg E Hlofx Aa Told - Energy-saving and low vibration thanks to angled cutting - Ergonomic, secure, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter drive wheels (520 mm) - Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid downfeed until material is detected or immediate cutting for serial production 4. Stop saw band 5. Raise frame just above the material 6. Open vice

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw - Conveyor belt for residual wood disposal Bodpswclkysfx Aa Teld - Stacking unit - Strip magazine not included in the sale - Package cross conveyor The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps Bsdpfxecggy Se Aa Told - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: bekas, Tahun pembuatan: 1993, Häwa mesin pengupas kayu dengan kepala frais H249 / 1000 Tahun pembuatan 1993 Diameter batang 0,25 m - 1,2 m Panjang batang 1,8 m - 7 m Kepala frais 30 kW Reduser akar 37 kW Terdiri dari: Konveyor melintang untuk input Pengupasan kulit kayu Sabuk konveyor Konveyor pengeluaran Bljdpjx Rv T Isfx Aa Ted

Kondisi: baik (bekas), Tahun pembuatan: 2000, de Blsdsvzagujpfx Aa Tod

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Bsdpfsh Ayyqex Aa Told Technical information subject to change.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Mesin Gergaji Panel HOLZ-HER Tipe: 1255 Kondisi: bekas Tahun produksi: 2011 Panjang potong: 6300 mm (maksimal) Tinggi potong vertikal: 2200 mm (maksimal) Tinggi pemangkasan horizontal: 2200 mm (maksimal) Ketebalan benda kerja: 60 mm (maksimal) Tinggi scoring horizontal: tinggi pemangkasan Tinggi scoring horizontal: 2040 mm (maksimal) Tegangan: 400V 50 Hz Berat: 920 kg Blodpfx Aex Hyr Hea Tod Perlengkapan: - Manual operasi - Pemeriksaan UVV berikutnya: 05/2026

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fuji Flow Wrapper Hochgeschwindigkeits-Horizontal-Form-, Füll- und Verschließmaschine Typ: FW3410/B Baujahr: 2011 Zodiac HC Terminaldrucker Bodpfsv T D D Uex Aa Tsld 200 V, 3 Ph, 50/60 Hz, 30 A Riemenbreite: 250 mm, Siegelnahtlänge: 300 mm Abmessungen: 3360 mm x 1200 mm x 1900 mm.