Forklift

Kalmar DCG150-6

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 15.799 h, kapasitas angkut: 15.000 kg, tinggi angkat: 3.070 mm, pengangkatan bebas: 1.500 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 3.200 mm, lebar kerangka garpu: 2.500 mm, berat kosong: 19.100 kg, panjang total: 5.000 mm, jenis penggerak: Diesel, lebar konstruksi: 2.300 mm, Diesel forklift Load center: 600 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 12.00-20 Rear tyres type: Superelastic Rear tyres size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing under attractive conditions are always available through us. We are also happy to buy your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this DCG150-6. P.S.: Our master forklift workshop specializes in repairs, servicing, overhauls, and custom builds for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for commission sale at our site. Sideshift, fork positioner, Todpfxexxnmmj Ad Rea heater, full cabin, full free lift, rotating seat

Kondisi: bekas, Tahun pembuatan: 2008, fa512b7e Tedjyv Ipfopfx Ad Rsa

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, jam operasional: 15.554 h, kapasitas angkut: 15.000 kg, tinggi angkat: 5.500 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 4.445 mm, lebar kerangka garpu: 2.500 mm, panjang garpu: 2.400 mm, berat kosong: 18.400 kg, panjang total: 5.055 mm, jenis penggerak: Diesel, lebar konstruksi: 2.550 mm, Diesel forklift Load centre: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 12.00-20 Rear tyres type: Superelastic Rear tyres size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing under favourable terms are always available. We are also happy to purchase your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be glad to provide you with detailed advice regarding this DCG 150-6. Tsdpju Dzkksfx Ad Roa P.S.: Our master forklift workshop specialises in repairs, maintenance, overhauls, and custom modifications for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for sale on a consignment basis. Sideshift, fork positioner, Heater, full cabin,

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 17.185 h, jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, Perlengkapan: kabin, pelindung kepala,

Kondisi: baik (bekas), Tahun pembuatan: 2006, Mesin bubut bekas dari OKUMA - Model: LT 200-M TwinStar - Tahun produksi: 2006 Tjdpfxjv S Su Ss Ad Roa

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 570 mm, tinggi benda kerja (maks.): 520 mm, berat benda kerja (maks.): 300 kg, jumlah slot dalam magazin alat: 34, tinggi total: 2.935 mm, panjang total: 3.600 mm, lebar total: 3.700 mm, lebar meja: 860 mm, model controller: FANUC, pasokan pendingin: 12 batang, jarak dari tengah meja ke hidung spindel: 780 mm, daya motor spindle: 15 W, pergerakan cepat sumbu Z: 40 m/menit, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, hidung spindel: ISO 40, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 80 rpm, tinggi meja: 560 mm, beban meja: 300 kg, diameter alat: 80 mm, panjang alat: 300 mm, berat alat: 8 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Vertical machining center with automatic pallet changer "DOOSAN model VC500" equipped with Fanuc 21i-MB CNC Tedpfx Adsu T Hg Te Rja

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. Tedpjr A Hcbsfx Ad Rea You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 5.500 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 15 rpm, lebar meja: 1.200 mm, panjang meja: 6.000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2006 Capabilities / Travel ranges: Longitudinal (X): 5,500 mm Vertical (Y): 1,400 mm Transverse (Z): 1,000 mm Clamping table: Length: 6,000 mm Width: 1,200 mm Number of T-slots on the table surface: 12 pcs Width of T-slots: 22 mm Distance between slots: 100 mm Max. workpiece weight: 13,500 kg NC rotary table: Position: Right side, flush-mounted into table surface Clamping surface: Ø 1,000 mm Positioning accuracy: 360 x 0.001° Max. workpiece weight: 3,500 kg Number of T-slots: 9 pcs Size of T-slots: 22 mm Distance between T-slots: 100 mm Paint finish: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle, 28 kW Spindle speed range: Spindle speed: 15 - 5,000 rpm Torque: 815 Nm Feed rates: X, Y, and Z axes: 2 – 10,000 mm/min Max. rapid traverse: Todpfoy Tkgbex Ad Roa X, Y, and Z axes: 25,000 mm/min Max. feed force: 10,000 N Base area FLC6000: approx. 11.0 x 5.6 m Overall height: approx. 3.5 m Weight: approx. 35,000 kg HEIDENHAIN iTNC 530 HSCI Automatic MTE diagonal milling head Automatic tool changer Chip conveyor Coolant system with 70 bar & (through spindle coolant) RepairFIT is our proven solution for a cost-effective entry into our product lines. The machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (deep-dive check) by us. After intensive cleaning, all identified defects and faults are professionally repaired by our qualified service team.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Meja pengindeks 400 mm manual Tsdpfx Adsxclfze Rsa Set perkakas termasuk Lubang meja: 10 - 130 mm Lebar alur pasak: 2 - 32 mm Kecepatan umpan: 0,5 - 5 m/menit; Diameter meja Ø: 690 x 460 mm Kapasitas beban meja: 2000 kg Jarak gerak ram: 0 - 425 mm Panjang: 1300 mm Lebar: 1100 mm Tinggi: 1400 mm Berat: 1800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Tjdpeyn Em Rofx Ad Rsa Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.