Gergaji bundar otomatis untuk aluminium

Kaltenbach SKL 400 NA

Kondisi: baru, Tahun pembuatan: 2025, Quick mitre adjustment from 30° to 150° steplessly with 0.5° accuracy according to scale. The mitre pivot point is the intersection between the saw blade and the material support, which means there is no change in length measurement. Stops at 30° and 45° on both left and right sides. Manual material clamping. At any frame angle, the material is clamped parallel at 90°. Cutting pressure reduction via the dead weight of the robust, torsion-resistant saw frame and fine adjustment based on material cross-section through hydraulic damping cylinder. Standard built-in coolant system, optionally upgradable with a micro-dosing unit. Machine stand with integrated chip collection tray. Saw blade drive with automatic shut-off. Precise saw blade carbide roller guide. Paint finish in silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw blade mounted on the machine, 4/6 TPI. Operating manual and spare parts list supplied on CD-ROM. Optional equipment: Hydraulic lifting of the saw frame. Dkjdsbi S Diopfx Adgog Design: Manual Mitre Cutting Capacities: 30° left: Ø 130 mm; square 120x120 mm 45° left: Ø 200 mm; square 180x180 mm 90°: round Ø 260 mm; square 300x260 mm 45° right: Ø 200 mm; square 180x180 mm 30° right: Ø 130 mm; square 120x120 mm Motor: [kW] 1.8 Saw blade: [mm] 3350x27x0.9 Blade speed: 35/75 m/min Working height: [mm] 900

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) Dsdjd N H A Nepfx Adgjkg - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1983, Saw blade diameter 400 mm Cutting diameter 130 mm Stroke 150 mm Cutting area, square 120 x 120 mm Cutting area, flat 300 x 40 mm Cutting area at 45 degrees: round 130 mm Cutting area at 45 degrees: square 110 x 110 mm Cutting area at 45 degrees: flat 245 x 40 mm Dkodstqqrzjpfx Adgeg Mitre cuts - double-sided 90° Cutting speed 13 / 25 m/min Control Minipos 807 Total connected load 4.3 kW Machine weight approx. 850 kg Machine dimensions (L x W x H) 1.20 x 1.20 x 1.82 m Accessories: Infeed and outfeed roller conveyors, each approx. 4000 mm long, NC-stop, coolant system

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 400 mm, Rentang pemotongan baja bulat pada 90°: 145 mm, panjang total: 850 mm, tinggi total: 1.800 mm, lebar total: 1.100 mm, berat keseluruhan: 700 kg, Cold circular saw semi-automatic, saw blade Ø 400 mm new, cutting capacity Ø approx. 145 mm, motor 3.0 / 4.0 kW, 2 speeds 1420/2880 rpm, vertical clamp, 2 manual horizontal clamps, stops at 30°, 45°, 60°, 90° both sides, coolant system, dimensions 85x110x180 cm, weight approx. 700 kg Dsdewp Ipxopfx Adgjkg

Kondisi: siap digunakan (bekas), Saw blade diameter: 450 mm, cutting width: 4 mm, saw blade type: carbide-tipped (HM) / high-speed steel (HSS), bore: 50 mm, mounting bolts: 4, bolt circle diameter: 80 mm, bolt diameter: M12. Saw blade feed speed: 3.5 m/min, rapid return: 4.5 m/min, material feed speed: 10 m/min / 20 m/min, cut length single stroke: 10 mm / 1000 mm, double stroke: 2000 mm, rotary table swivel range: +/-90°. Machine dimensions X/Y/Z: approx. 2700 mm / 1450 mm / 1900 mm, weight: approx. 1500 kg. Documentation available. Inspection on site possible. Dodov Hgkqopfx Adgokg