Mesin bubut spindel terdepan dan traksi

KAMI/SHEM DKM 500SC X 1500 mm

Kondisi: baru, Tahun pembuatan: 2025, DPF MASTER FLASH STANDARD™ is a compact device for regenerating diesel particulate filters (DPF) using the hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and an integrated filtration system. The cleaning process is fully automated and restores up to 99% of the filter’s original factory specifications. The device comes with adapters that allow connection to all passenger car DPF filters. To further increase regeneration efficiency, we recommend purchasing the specially developed DPF Heater Pro+ drying system at a special offer price. TECHNICAL DATA: - Weight: 200 kg - Chamber external dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Working pressure: 3 bar - Power supply: 3 x 400 V - Maximum output: 6 kW - Frequency: 50 Hz - Adjustable fluid temperature: 30°C to 100°C - Pump performance: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency stop switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature controller - Programmable automatic cycle controller - 150-liter water tank - Water pump with capacity up to 133 L/min - Built-in pressure regulator (0-8 bar) - Integrated filtration system - Adapters for DPF filters When you purchase our machine, you receive a starter package to help you get started right away. The package includes: - A set of 3 filter cartridges + 3 replacement filters Kodegllxgjpfx Aahonf - XPOWER DPF Cleaner chemical kit (2 x 1 L)

Kondisi: perlu perbaikan (bekas), Machine number: 1464 Type / Model: FUW 250/IV Travel (X-Y-Z): 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Kedpfx Aasd Hl Stjhonf Spindle taper: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Power connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1995, nomor mesin/kendaraan: 956158, jenis kontrol: manual, jumlah rol: 3, diameter poros: 75 mm, berat keseluruhan: 1.300 kg, panjang total: 1.000 mm, lebar total: 1.130 mm, tinggi total: 1.100 mm, daya: 4 kW (5,44 hp), tegangan masuk: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic section bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-7-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1,300 kg Shaft diameter: Ø 75 mm Knodpfsxl Sq Aox Aahjf Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Including: - Brake motor - Push-button control - Digital display - 1 extra set of rolls for tube Ø 48 and Ø 42 mm - Dutch-language manual Price of the ROUNDO section bending machine, model R-3: upon request via email The machine retains its original paint and has seen very little use! Terms of delivery: Delivery time: ex-stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that deals in and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). Visit our website for our current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians, and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Kondisi: baik (bekas), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional. The machine can be inspected and tested under power on site. International shipping available. Inspection: Please note that, to avoid misunderstandings, the machine can be inspected and tested under power prior to purchase. Should you have any questions, please ask them before buying to avoid any uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Knedpoum Rpyefx Aahof Shipping by freight forwarder.

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Kodpertd Uwjfx Aahonf Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas),

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Weishaupt gas burner WM-G10-3A - Model: ZM Output: 110-1000 kW Year of manufacture: 2005 Comes with existing Dungs DN50 fittings Kjdpfxef S A Rbo Aahenf We speak Russian! Viewing only possible by telephone arrangement! Preferred sale to dealers, commercial traders, or for export. All information is provided without guarantee. Subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. We are happy to purchase your used boiler or burner! Naturally, we also handle all paperwork. Loading possible

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 7.792 h, kapasitas angkut: 4.000 kg, tinggi angkat: 5.650 mm, pusat beban: 500 mm, jenis bahan bakar: gas, Tersertifikasi DGUV hingga: 11/2025, panjang garpu: 1.600 mm, kondisi ban: 95 persen, berat kosong: 7.183 kg, warna: kuning, We are offering an absolutely top-condition Jungheinrich forklift. In 2021, it was completely refurbished to a 5-star standard by Jungheinrich and has only clocked 45 operating hours since the overhaul. Knodpfxew N Iz Hj Aahsf The paint is original – it has not been resprayed or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspection (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 45) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift truck Year of manufacture: 2012 / 5-star refurbishment in 03/2021, complete with new Kaup fork positioner T466 Rated capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load centre: 500 mm Mast: Triple, including free lift Equipment: Solo-Pilot, road lighting package (StVZO), LED work lights (2 front, 2 rear), front/rear/cabin/roof windows Steel doors, leather seat, rear-view mirror, armrest, 2-way additional hydraulics New Kaup fork positioner 4.8T 466B The truck has only been run for 45 hours since its overhaul, and all safety inspections and maintenance have been carried out.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1981, lubang spindel: 128 mm, Centre height 550 mm, distance between centres 6,000 mm, drive power 30 kW, Heidenhain digital readout, 3-jaw chuck 500 mm, tailstock, steady rest, faceplate 900 mm, leadscrew nut defective. Kedpfx Aaewz Eluehonf

Kondisi: baru, Die DURMA AD-S 601000 is a high-performance hydraulic press brake that ensures maximum precision and efficiency in sheet metal processing. With a pressing force of 1,000 tons and a working length of 6 meters, it is ideally suited for demanding applications, especially when handling large and thick materials. Technical Specifications: - Model: DURMA AD-S 601000 - Pressing Force: 1,000 tons - Working Length: 6 meters - Control: SKY22 (3D control) - Backgauge: 6 axes (X1, X2, R1, R2, Z1, Z2) Knsdpovwm A Isfx Aahjf - Bending Aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As new, available immediately Features and Benefits: - High bending accuracy thanks to state-of-the-art CNC control - Robust construction for long service life - Flexibility provided by the 6-axis backgauge control - Support for heavy and large sheets through the integrated bending aid The machine is available immediately and can be inspected upon request. For further information or to arrange an appointment, please do not hesitate to contact us.