Internal mesin Broaching

Karl Klink RSI 20/DT

Kondisi: baik (bekas), diameter penggilingan: 1.600 mm, panjang penggilingan: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 steady rests hydrostatic Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Pgedpfx Abovvvw Esueg Center height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Approximate dimensions: Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, no representation or contractual terms will be constituted. We recommend verifying all critical details independently.

Kondisi: bekas, EZSET EZ400 tool presetting device Pgsdpfouhb Stsx Abuog

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pgoded Nb A Nspfx Abusg - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: bekas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 spm Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on the table Change gears Pgedsu Uu S Topfx Abujg

Kondisi: baik (bekas), Tahun pembuatan: 2008, Teile, die von Hand gezeigt werden, sind nicht enthalten. 12.000 U/min X 610 mm Y 420 mm Pedpfx Absuc Tpgsuegg Z 450 mm

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Psdpfotzdyzsx Abuegg

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Die Maschine kann nach Terminvereinbarung besichtigt werden. Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár Psdpfx Aeifi D Tobuegg

Tahun pembuatan: 1999, Kondisi: bekas, Tractive force – max. 6.0 t Ram stroke – max. 1,250 mm Podpfx Abed Il A Nouogg Space requirement approx. 1.20 x 1.20 x 3.25 m

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2007 Availability: Multiple machines available Condition: Very good, used, from a training workshop, last maintenance 09/2024 Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank section: 20 x 20 mm Spindle nose according to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40.5 mm Pjdpfxsxd Tiwo Abuogg Main spindle internal taper: 5 mm Drive power 60%/100% duty cycle: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Cross feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Rapid traverse speed longitudinal/cross: 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 DP Max. number of thread leads: 99 Tailstock quill diameter: 50 mm Tailstock quill stroke: 130 mm Tailstock quill taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery - Rota S Plus 200-52 3-jaw chuck - Multifix quick-change toolpost - Machine lamp - Coolant system - Machine feet - Original documentation - Weiler maintenance record 09/2024

Kondisi: diremaj di bengkel (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, kecepatan rotasi (maks.): 6.000 rpm, kapasitas tangki: 1.200 l, EN: SHW Powerspeed 5 Travel distances • X-axis (bed): 10,000 mm • Y-axis (ram): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head rotation range tool holder: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Conveyor length: 10,000 mm Coolant system • Tank capacity: 1,200 liters Please note: The images are sample images for comparison purposes only About us: Pgsdpfxsv Dhw Tj Abusg MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main area of expertise is tool milling machines. Our services include spare part deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metalworking mill - used CNC mill - CNC milling machines - CNC mills - large part machining - CNC large part machining - milling - shw - PS5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine