Gergaji besi berkecepatan tinggi Mesin gergaji besi

KASTO HBS 210-240

Kondisi: bekas, Hydraulic Hacksaw KASTO HBS 210 / 240 Machine No. 1116 145 220 Year of manufacture: 1994 Cutting capacity at 90° round: 210 mm flat: 240 x 190 mm square: 210 x 210 mm at 45° round: 150 mm Blade length: 400 mm Stroke rates: 62 / 125 strokes per min. Material support height: 500 mm Kjdpfx Acjuqgbts Hena Motor power: 0.5 / 0.75 kW Power supply: 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump integrated in machine base Required space (L x W x H): 1200 x 500 x 1200 mm Weight: 170 kg In good condition

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Tank capacity: 775 l, max. batch weight: 100 kg, heating power: 26 kW, max. temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swivel drive, automatic water filling, and oil separation with a coalescence separator unit and oil collection container. Documentation available. An on-site inspection is possible. Knjdpfewr Dxhsx Ac Hoa

Kondisi: siap digunakan (bekas), Four-sided planer / construction timber planer Maximum width: approx. 55 cm Knodpfx Ajw Dn Uqec Hoa Maximum height: approx. 14 cm Immediately available Location: Austria, near Grieskirchen

Kondisi: baru, Grinding range 2 - 13 mm Point angle min./max. 90 - 140 degrees Connection voltage 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Kjdpfx Acsupxdqj Hona

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid traverse speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel: -20/+90 degrees - Minimum resolution: 0.001 degrees TOOL CHANGER Kodsuhbr Tjpfx Ac Hjna - Tool changer type: Parapluie (umbrella-type) - Number of tools in magazine: 40 TURNING SPINDLE - Spindle speed: 8,000 rpm - Max. bar diameter: 32 mm - Minimum resolution C-axis: 0.001 degrees - Travel: 360 degrees ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,500 x 2,600 mm - Machine height: 2,300 mm - Machine weight: 2,850 kg MACHINE HOURS ACCESSORIES - Control: Siemens 840 D - 3-color status light

Tahun pembuatan: 2000, Kondisi: baik (bekas), Pressing force 28 t Ksdpfx Aji Eld Uoc Hjna X-axis 2000 mm Y-axis 1000 mm Machine weight approx. 11,000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW Knodpfx Acjyw H Szs Hsa RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: bekas, Sheet width 4080 mm Sheet thickness 2.0 mm steel Sheet thickness, stainless steel (Niro): 0.8 mm Ksdpfx Acsxabc Re Hsna Sheet thickness, aluminum: 2.5 mm Cutting angle 1.3 degrees Strokes 34 strokes/min Frame clearance 4310 mm Backgauge – adjustable 15.0 – 750 mm Table height 820 mm Control system: ELGO Motor power 9.0 kW Machine weight approx. 3600 kg Dimensions (L x W x H): 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. 70,000 euros Special price on request The MHSU motorized guillotine shear is based on a torsionally rigid, robust welded construction combined with a dynamic, low-noise, and powerful geared motor. High static and dynamic rigidity is ensured by generously sized main assemblies such as the knife beam, support table, side frames, and main drive unit. The power shear is designed for sheet metal and plastics processing. This shear enables series production of clean, precise cuts with ease. Equipment: - NC heavy-duty electro-motorized guillotine shear (swing cut principle) - with ELGO NC control unit * digital readout for the backgauge * adjustable from the front right * nominal/actual value input * stepless adjustment over the entire traverse range * limit-value protection with limit switch - NC electro-motorized material/backgauge - shatterproof, torsion-free steel welded frame - compact and clear machine design - support table with handholds - 1x hold-down bar - 1x side gauge with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating manual Special accessories included: - Pneumatic sheet metal support for thin sheet cutting

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 5.743 h, produsen pengendali: HEIDENHAIN, model controller: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-position tool changer. The working area measures 600 x 450 x 450 mm and supports a maximum workpiece weight of 500 kg. It is ideal for the precise machining of metals and alloys, offering a stable construction and efficient cooling system. Consider purchasing this MIKRON VCP 600 vertical machining center. Contact us for further information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle hours: 5,743 • Tool changer: 30 tools • Positioning accuracy: ±3 µm • HSK 63 tool holding system • Key features: • Versatile application: precise machining of various materials • High-performance spindle for fast, accurate processing • Stable, robust construction for high accuracy with heavy workpieces • Automation-ready: integrated functions for automated tool and workpiece changing Knjdpfxox Imtye Ac Hoa • Efficient cooling system for optimized performance and tool life • Application: ideal for tool and mold making as well as the production of high-precision components across several industries Additional equipment • m&h 3D probe • Vice: not included

Kondisi: sangat baik (bekas), Number of pallets: 18 Knedpfoilp Eusx Ac Hea Load capacity: 25 kg Maximum workpiece height: 350 mm Maximum workpiece diameter: 230 mm Various accessories MARCELS MASCHINEN AG