Mesin pembubutan dan penggilingan CNC

Kekeisen VFB 2000

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), X-axis: 2000 mm, Y-axis: 750 mm, Z-axis: 800 mm, max. workpiece weight: 2.5 t, spindle hours: 12,000 h, connected load: 60 kVA, length: 4000 mm, width: 3100 mm, height: 3200 mm, weight: 22 t, supplied with documentation and tooling, regularly serviced, on-site inspection possible, machine available from July 2024. Fedpfx Ajpvk Ahom Ssgc

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice. Fodpfxet Hw Nyo Am Sogc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 1.200 mm, rentang pengukuran sumbu Y: 2.000 mm, rentang pengukuran sumbu Z: 1.000 mm, Measurement ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000]µm CNC control: Renishaw UCC S5 Handbox: Renishaw MCU-5, optionally wireless MCU-5W Fedpfjdv I Abox Am Sjgc Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe changer: Renishaw (Price for REVO approx. €80,000 new) Software: Inspect3D Inca V6, new license (all languages) Original year of manufacture: 2014, modernized in 2017 and 2025 Trade-in against other CMMs possible

Kondisi: bekas, Tahun pembuatan: 2008, Siemens 840D Control Fgjdpjwzypnefx Am Sec Gear Hobbing Machines for Large Gears Flexible and Universal Gear Hobbing for Gears Gleason’s large gear hobbing machines deliver maximum productivity for roughing and finishing operations on cylindrical gears used in a wide range of industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear manufacturing, and more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with separate linear guides and backlash-free rollers. This ensures precise slide movements with every feed motion. The work table design guarantees optimal conditions for absorbing and transferring cutting forces to the machine bed. The use of hydrostatic table bearings in combination with the proven backlash-free double worm gear ensures precise table movements and the highest face and concentricity accuracies of the work table—regardless of significant variations in workpiece weight and/or high machining forces. The motorized hobbing heads for external and internal gearing are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal hobbing heads. The drive’s power range takes future tool developments into account. Of course, the hobbing head drive is also backlash-free. These machines are particularly well suited for the use of the latest cutting tool materials, regardless of whether dry or wet machining is preferred.

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Fodpjt Hww Dsfx Am Sjgc Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Fodpfx Amedfgg Ie Sjgc E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Tahun pembuatan: 2013, jam operasional: 84.545 h, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 17.500 kg Penggerak Utama Gaya punching: 220 kN TRUMPF TRUPUNCH 5000 S10 ini diproduksi tahun 2013. Dilengkapi sistem kontrol Siemens Sinumerik 840D, area kerja 3050x1550 mm, dan tenaga tekan punching sebesar 220 kN. Mampu menangani berat plat hingga 280 kg serta ketebalan hingga 8 mm. Termasuk Linear ATC untuk 21 alat serta opsi tambahan seperti MULTITOOL dan ENGRAVING. Mesin ini selalu dirawat secara rutin dan dalam kondisi baik. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Fgjdsx D Nwwspfx Am Sec Punching

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 9.000 h, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 – 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Fgjdsxf Hqqepfx Am Sjc Sub Spindle Machining diameter: 20 mm Spindle speed: 200 – 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 – 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Toolholder/cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Toolholders, quill (diameter): 19.05 mm Toolholders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Machine footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle center height: 1,050 mm Machine weight: 2,150 kg Connected load: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - Bar feeder: FMB Turbo 3-26 - Option for long parts - Spindle flushing (Scherzinger pump)

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 15.996 h, tegangan masuk: 400 V, berat keseluruhan: 6.750 kg, en-001 Fgsdpfx Aotwliwom Soc

Kondisi: bekas, Palet dengan alur-T 18H7, cocok untuk DMG DMC 100 H dan DMG DMC 100 U serta DMC 125H/U Duoblock. Tersedia lebih dari 10 palet. Fgsdpsqx Uh Nefx Am Soc