Mesin gerinda silindris

KELLENBERGER 600 U

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% Kjdpfxsd Ih D Es Al Ssnb - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Hydraulically operated precision plunge grinding machines Rollomatic. Grinding process: cylindrical plunge grinding; workpiece diameter range: 0.2mm–6.35mm; shank diameter range: 1mm–6.35mm; total workpiece length range: 30mm–60mm; grinding wheel diameter: 200mm; grinding spindle speed: 6000 rpm; workpiece speed: 800 rpm. Machine dimensions (X/Y/Z): approx. 1100mm/800mm/1300mm; weight: approx. 600kg. Includes spare parts. Documentation available. Knedpow Dfd Nsfx Al Seb

Kondisi: bekas, Grinding diameter 250, 350, 450 mm Grinding length 600 mm Centre height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workhead swivelling 360° Grinding head swivelling 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed rate 0.001–0.030 mm/Ø Continuous feed rate 0–0.95 mm/Ø Table swivelling ±10° Table longitudinal travel 900 mm Kjdpfxod Ih D No Al Sonb Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (unsupported) 130 kg including clamping Internal spindle mount 70 mm Total connected load 6.5 kW Machine weight approx. 2.2 t Required space approx. 3.1 x 2.0 m As a world-leading company in Kellenberger overhauling / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer you service for your machines metric overhauled and newly painted. Version R: Machine features central lubrication and roller guides in the flat bed of the X-axis as well as air lift in the grinding headstock. -Digital readout with 2 axes. Resolution X-axis 0.5 µm Available options at extra cost: -Rotary encoder with digital readout in the workhead -Rotary encoder with digital readout in the grinding headstock (no height adjustment via spindle possible) -New sturdy internal grinding attachment with diameter 80mm or 100mm with height adjustment -Increase in centre height to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories available on request. The machine tool currently does not comply with the fundamental safety and protection requirements as described in the BetrSichV 2015. An increase in the required minimum level of protection is to be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Internal diameter: 340/440 mm Grinding depth: 99999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cross feed (in increments): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we deliver machines in as-new condition with warranty and can also provide service for your machines (Warranty: 12 months from delivery – for Germany and neighboring countries). Dedicated internal grinding machine with infinitely variable drive 0–100%. Now available in current color schemes!!! Standard centre height: 175 mm. Upgradeable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversal accuracy max. 0.01 mm! Kjdpfed Ih Dxex Al Sonb Geometrically overhauled and newly painted with: - New control cabinet - New workpiece spindle motor and controller with three-phase technology - 2-axis digital readout, resolution x-axis 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, height-adjustable - Increase of centre height to max. 225 mm Included: - Operating tools Further accessories on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as defined in the BetrSichV 2015. Raising the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Kondisi: sangat baik (bekas), Boring depth 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors, the following from stock, non-binding: DEGEN Universal Deep Hole Drilling Machine Model UTB 500-2 Year of manufacture - _____ Boring depth 650 mm Drilling diameter with twist drill 16 mm Drilling diameter with single-lip drill 25 mm Spindle taper SK40 Stepless feed rate 0-120 mm Rapid traverse rpm Drilling unit vertically adjustable 250 mm Table size 570x1000 mm 4 T-slots 14 mm T-slot spacing 90 mm Table load capacity 1000 kg Table transverse travel 460 mm Table swivels through 360° Knsdpfx Alexx A D Te Seb Weight approx. 1,600 kg Accessories / Special equipment: • Compact freestanding design on a robust base • Deep drilling up to 500 mm length possible — ideal for longer drilling operations in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • The machine features digital readouts for X and Y axes (RSF Elektronik type Z 502, 0.01 mm display resolution) • A solid solution for workshops with the need for deep, straight drilling, as long as very large diameters or complex operations are not required • The Degen UTB 500 has been extensively modernized – now with Lenze feed drive, overhauled Y-axis, new glass scale encoder, new spindle bearings and new gas strut – delivering reliable precision and high performance Condition: good to very good – under power and ready for demonstration A video of the machine can be found here (please click the link): UTB 500/4 Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. More tool grinding machines in stock – please enquire!

Kondisi: bekas, en-1 Ksdpod Ih D Rofx Al Ssnb

Kondisi: bekas, Tahun pembuatan: 2000, de-hu-01 Knedpsy T E Rzjfx Al Ssb

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 650 mm, lebar penggilingan: 300 mm, diameter roda gerinda: 160 mm, berat keseluruhan: 2.550 kg, daya: 4 kW (5,44 hp), Brand: CCP - STANKOIMPORT Model: 3E711B Grinding dimensions: 650x300mm (X, Y) - 320mm (Z) Magnetic table surface: 630x200mm Maximum table load: 150kg Distance spindle axis to table surface: 80 - 445mm Maximum wheelhead travel: 365mm Manual table travel: (700mm, 250mm) Table longitudinal feed speed: 2 - 30 m/min Cross feed speed: 0.01 - 1.5 m/min Vertical feed graduation: 0.002mm Micrometric vertical feed graduation: 0.0005mm Cross feed graduation: 0.5mm Micrometric cross feed graduation: 0.001mm Cross travel per handwheel revolution: 5mm Vertical travel per handwheel revolution: 0.20mm Knodpfx Alsqy H Dps Sob Automatic cross feed (longitudinal table stroke): 0.2 - 30mm Automatic wheelhead feed: 0.002 - 0.08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kW Weight: 2550 kg.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Inspection and cleaning of various accessories Ksdpfx Alew U Ry No Sjnb Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance between workpiece headstock and tailstock, extended: 750 mm Standard centre height: 125 mm Centre height using interchangeable intermediate plates, workpiece spindle and tailstock: 175 ⇒ 250 mm Maximum possible swing diameter (at 125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 ⇒ 500 mm Worktable swivelling range, both sides: 10° each Maximum length for surface grinding (table width = 200 mm): 900 mm Table speed, hydraulically stepless adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270° With locking positions every: 90° Vertical movement of grinding spindle head, centre height: 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid traverse and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Infeed for plunge grinding: 0–0.9 mm/rev Micro-stop for feed per division: 0.001 mm/rev Swivelling range of workpiece headstock: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Inner taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Errors or omissions excepted. The technical data is provided without obligation. Inventory No. 2170089, List of machine accessories: 1 Workpiece headstock MK5 1 Sine ruler without comparator 1 Grinding spindle head with 4 drive pulleys 1 Tailstock MK3 1 Collet draw bar with extractor and reducing sleeve B32 1 Internal grinding attachment with quill Fischer UJ50x250 – Drive pulley Ø 48 for 14,000 rpm 1 Rotatable wheel dressing attachment with 50 mm base 1 Table rotation stop without comparator 1 Coolant unit with decanting system Knedpfx Aed Amifol Sjb 1 Ejector 1 Balancing bar

Kondisi: baru, Daya berkelanjutan: 60 kW / 75 kVA Mesin: Fawde 4110/125Z-09D, 4 silinder, berpendingin air Sambungan: 1x32A, 1x64A, 1x220V Stop kontak atau pemutus daya, opsional stop kontak 125A Kedpfoh R Tm Iex Al Ssnb Frekuensi: 50 Hz Tegangan: 400/230 V Termasuk: pengatur kecepatan elektronik, AVR, pengisi daya baterai, pemanas awal Pengontrol Comap AMF8 dengan penyambungan generator ke jaringan Perlindungan arus sisa (FI)

Kondisi: bekas, 3 buah flange untuk tipe 600 U – dijual satuan atau paket Knedpfezwxufox Al Ssb

Kondisi: bekas, DATA TEKNIS - Jarak antara senter: 600 [mm] - Tinggi senter: 125 [mm] - Orientasi meja: 11 [derajat] SPINDEL PENAHAN BATU GERINDA - Dimensi batu gerinda kiri: 400 x 50 x 127 [mm] - Daya: 3 [kW] - Kecepatan putar spindle: 1500 / 1700 / 2200 [Rpm] - Orientasi spindle penahan batu gerinda: 270 [derajat] SPINDEL PENAHAN BENDA KERJA - Orientasi spindle penahan benda kerja: 360 [derajat] - Kecepatan putar spindle: 20 - 400 [Rpm] - Kerucut dalam spindle: Morse 5 - Daya: 0,9 [kW] SENTER TAILSTOCK - Kerucut dalam: MK4 - Stroke pinol: 30 [mm] SUPLAI LISTRIK - Tegangan suplai: 380 [V] BERAT DAN DIMENSI - Dimensi ruang pemasangan: 2580 x 1680 [mm] - Tinggi mesin: 1670 [mm] - Berat mesin: 2200 [kg] PERLENGKAPAN - Tangki cairan pendingin Knodpfxozf Rcdo Al Ssb * dengan filter kertas - 1 spindle untuk gerinda dalam - Tangki cairan pendingin dengan pompa - 1 lunette dengan tiga tombol - 1 alat penyelarasan spindle dalam

Kondisi: bekas, Tahun pembuatan: 1996, tinggi total: 2.150 mm, panjang total: 1.420 mm, lebar total: 2.010 mm, berat keseluruhan: 3.100 kg, kecepatan spindle penggilingan: 6.000 rpm, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 580 mm, Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC Control HMC 400 CNC Ksdpfx Aezavqwsl Ssnb Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 580 mm C-axis (table rotation): ±200° Max. grinding wheel diameter: Ø 200 mm Spindle speed (grinding): 3000 / 6000 rpm If you have any questions about the machine, please feel free to contact us by phone or email. Please have a look at our other listings to get a complete overview of our inventory.

Kondisi: baik (bekas), Tahun pembuatan: 2003, Ref. No.: 10618 Manufacturer: KELLENBERGER Model: 600 U No. 33 Year of manufacture: 2003 Control type: Conventional Control: n/a Location: Halberstadt Country of origin: Switzerland Kjdpfxoya Dags Al Ssnb Distance between centres: 600 mm Centre height (standard): 125 mm Centre height with raised headstock and tailstock blocks: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel, each side: 10° Table reversal dwell time: 0 - 5 sec Diameter / Width / Bore: 250 x 13 x 76 mm Grinding spindle speeds: 1500 / 1700 / 2200 / 3600 rpm Grinding head swiveling range: 360° Cross travel of grinding head: 285 mm Rapid infeed/retraction of wheelhead: 40 mm Incremental feed per table reversal: 0.001 - 0.03 mm/dia Micrometer fine feed, 1 scale division: 0.001 mm/Ø Infinitely variable working speeds (normal / special): 20-400 / 10-400 Max. grinding length: 900 mm Additional Information: Machine can be inspected under power.