Mesin bubut CNC

Kern D23 CNC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Machining centre Manufacturer: KNUTH Model: EcoMill 350 CNC Redpotiauhefx Alast

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9.192 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 16.000 rpm, jumlah sumbu: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and offers 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200 machine we offer for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining center C 1200 V • Heidenhain iTNC 530 CNC control • Spindle: 16,000 rpm • SK 40 tool taper • 30 tool stations • Fixed clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, ensuring excellent mass distribution and ideal conditions for high rapid traverses and feed rates • Lead screw diameter and pitch (X and Z axes): 40 / 20 mm • Lead screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) on X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm Rodpeylw Stsfx Alaot • Recommended ambient temperature to maintain accuracy: 20 °C ± 1 °C • Flushing/washing system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time (chip-to-chip) according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction buttons, feed control, rapid traverse, emergency stop, and enable switch • Machine hours – 11,927 h • Spindle hours – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic hand control module (iTNC) Technical Specification Taper Size: SK 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Rsdpfx Aljht Hg Djajt Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: bekas, Centre height: 140 mm; Table surface: 150x1050 mm; Longitudinal travel, manual: 600 mm; Cross travel: 230 mm; Vertical adjustment: 250 mm; Rodpfx Ascbhl Nolast 2 motor speeds: 1500-3000 rpm; 6 grinding spindle speeds: 2000-6000 rpm; Maximum grinding wheel diameter: 250 mm;

Kondisi: diremajakan ulang (bekas), For Sale: EOS P730 – Guaranteed Operational Condition This EOS P730 has been thoroughly cleaned and refurbished by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Synrad 48-5 CO2 lasers, this high-quality machine is engineered for demanding SLS production environments. Available Accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P • Unpacking station • Build frames Upgrade Options: Take your EOS P730 to the next level with available upgrades such as: • Coherent C70 laser upgrade for enhanced performance • Laser window upgrade for improved efficiency • And more! Contact us for additional details. Featured Materials We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers outstanding performance at a fraction of the cost of OEM powders, allowing you to reduce production costs without compromising quality. Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & Maintenance Plans: Flexible options available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only supplier offering a complete solution for pre-owned EOS equipment, we deliver unmatched expertise and reliability. What We Offer: • Expert Service: Installation, maintenance, repairs, and upgrades performed by skilled former EOS technicians. • Exclusive Materials: Cost-effective consumables such as our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-End Support: From transport to tailored maintenance plans, we handle every detail. Choose IM3D for reliable machinery, premium materials, and the expertise to maximize your SLS production. Rsdpfx Aeq E I Anjlaot Contact us today for more information or any specific inquiries!

Kondisi: bekas, Spindeldurchmesser_90mm Rjdpfoxwzg Rox Alajt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Year of manufacture: 2004 Sauter 8-position turret VDI 20 + driven tools at all stations Main spindle holding brake C-axis with interpolation Reinforced coolant pump: 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA colour screen Working Area & Capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Centre distance: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (to DIN 55027) / Taper MK 6 Drive power (AC): 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (in 2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & Axes Rapid traverse (X/Z): 8 / 10 m/min Feed rate: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool Carrier & Tailstock Turret: 8-position disc turret (Sauter), all stations powered Driven tool speed: up to 6,000 rpm (3.8 kW) Tool system: VDI 20 (DIN 69880) Tailstock: quill diameter 70 mm, stroke 120 mm, taper MK 5 Dimensions & Capacities Dimensions (LxWxH): approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 litres Fixed steady rest with rollers, guiding diameter 10–115 mm Travelling steady rest with rollers, guiding diameter 10–115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-clamping chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, including speed monitoring with separate adjustable speed control. Redpfx Aljy Dckajajt Tooling equipment: fixed tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used for single-part production in prototype manufacturing. Very low spindle hours Immediately available.

Kondisi: siap digunakan (bekas), 38193001 Rodpfsx Hz N Hjx Alajt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, tr_001 Redexg Rigspfx Alajt

Kondisi: baik (bekas), EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6,735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform Redpfx Asxbgnbelajt The Multibox is typical accessory for EOS systems for powder handling, transport, and intermediate storage of material. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variation < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, energy consumption approx. 2 kW Exhaust: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (±0.1 °C) Dimensions & Weight: Machine (W × D × H): approx. 1,230 × 1,175 × 2,100 mm Control cabinet: 610 × 790 × 2,100 mm Control terminal: 950 × 700 × 1,550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure Pump Technical Data Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ±0.1 °C Cooling type: Air-cooled Pump: High-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: Water or water-glycol Connection: NPT version ("AN") Supply: 200–230 V AC, 1-phase Refrigerant: R407C Weight: approx. 1,110 kg Condition: used Scope of delivery: (see picture) (Technical specifications and information subject to change and error!) For further questions, we will be happy to answer your call.