Mesin pengupas batang KIESERLING WDHF35/50/75

KIESERLING Bar peeler WDHF35/50/75

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel Ijdpfxjzb Evls Abietl • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 3.000 h, jarak pergerakan sumbu X: 6.100 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 950 mm, CNC-Fräsmaschine mit Fahrständer – Komplett modernisiert durch REM (2021) Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten vollständig auf den neuesten Stand gebracht mit moderner Heidenhain TNC 320 Steuerung. Sofort einsatzbereit für die Produktion. HAUPTDATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsweg des Schlittens): 950 mm • Doppelfräskopf | Kopfdrehung: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spannungsfreigabe) • Kopfmaße: 290 × 290 mm • Spindelantriebsleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 Itsdpfx Absn D N H Toiel IHRE VORTEILE BEI REM: ✔ Maschine vollständig geprüft und im Einsatz getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Attraktive Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie und Schwerindustrie. Fordern Sie jetzt die vollständigen technischen Daten, Fotos und ein Vorführvideo an.

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 750 mm, lebar meja: 1.500 mm, panjang meja: 850 mm, kecepatan rotasi (maks.): 2.500 rpm, gores kuas bulu: 120 mm, SHW UF 5 Travel Paths • X-axis (rotary table): 1,500 mm • Y-axis (vertical spindle head): 1,000 mm • Z-axis (horizontal spindle head): 750 mm Control System • CNC Control: Heidenhain TNC 355 Iodpfx Absvfm I Tsistl Automatic Swivel Head (change between horizontal and vertical machining) Quill 120 mm Milling spindle taper: SK 50 Spindle speed: 2,500 rpm Partial Overhaul 2014 • Year of manufacture: 1990 • Inspection/Refurbishment: 2025 Table Assembly • Travel: X = 1,500 mm • Clamping surface: 1,500 x 800 mm Chip Conveyor Enclosed Splash Guard Cabin For this model series (SHW UF 5), we have ALL spare parts in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in tool milling machines. Our services include, among others, spare part supply, on-site customer service, machine overhauls, and control system retrofits. Our Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used bed milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drilling/milling machine - used metal milling machine - used metal mill - used cnc mill - cnc milling machines - cnc bed milling machine - large part machining - CNC large scale machining - milling - SHW - UF5 - UF 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM milling machine - MBM machine

Kondisi: bekas, Tahun pembuatan: 2007, de2hu-it-lt-001 Iedpfx Ajw Rrb Hobiotl

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 1,500 mm Y travel: 1,000 mm Z travel: 1,000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4,000 / stepless rpm Tool holder horiz./vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1,000 Nm Swiveling spindle head left and right: 90° Feed rate: 1 - 6,000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping table surface L x W: 1,600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. LxWxH: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Itsdpju Nc Riefx Abiol Required floor space approx. LxWxH: approx. 38.5 m² Applications: Milling, drilling, tapping, boring with direct encoded linear measurement systems The guides of all 3 axes are flat guideways Milling head position controlled +/-90° ICS (internal coolant supply) and external cooling Milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar working pressure with coolant unit, high-pressure pump 60 bar (internal cooling), nominal flow rate 20 l/min, and low-pressure pump 4 bar (external cooling), as well as spray gun Compact band filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Iodpoyr Dmdefx Abiotl Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details.

Kondisi: bekas, Table unit from a DROOP & REIN gantry milling machine Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and extremely robust guideway Table clamping surface: 5500 x 2000 mm Travel path of the table clamping plate: approx. 3100 mm Table height/overall height: 1050 mm Table load capacity: max. 20 tons Ballscrew: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic way cover - Originally from a DROOP & REIN gantry milling machine - Longitudinal table movement via ballscrew and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive by SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Iedothuzpopfx Abiotl Width: 2000 mm Overall height: 1050 mm Net weight: 28 tons Good condition

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 3.728 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0040001634C, panjang pembubutan: 500 mm, diameter pembubutan: 240 mm, daya motor spindle: 1.400 W, kecepatan spindel (min.): 5.000 rpm, kecepatan spindel (maks.): 6.000 rpm, lubang spindel: 170 mm, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 525 mm, jarak gerak sumbu Z: 525 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 22 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 171.192 Nm, gaya umpan sumbu X: 3 N, DMG MORI CTX Alpha 500 diproduksi pada tahun 2022. Pusat pembubutan serbaguna ini dilengkapi dengan pengendali Siemens dan LNZ Quick load servo 80S2. Berat: 4.300 kg. Iodpsyz S T Sjfx Abistl Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. Itjdpetmqi Djfx Abiel The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: baik (bekas), Werkzeughalter VDI 30 Itedpfoww Hlujx Abisl